SoW_LINEAR_2YR_HIGHER

advertisement
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
OVERVIEW for Higher sets
Y10 AUTUMN TERM
Notes:
1. Y10 Autumn term has 4 hours of revision time available.
2. Y10 Spring term has 4 hours of revision time available.
3. Y10 Summer term has 4 hours of revision time available.
4. The Year 10 scheme assumes an end-of-year exam will be set on the topics covered in Y10.
5. Y11 Autumn term has 5 hours of revision time available.
6. AQA Linear specification references: G3.1, G3.3, G3.5 are not specifically recorded. This content, at Grade E, can feature in ‘lead-in’ questions in the exams.
7. Editable Word files are provided on the CD-ROM in the back of this Teacher Guide.
Chapter
Teaching
hours
Grades
AQA Linear specification reference
9. Estimation and
currency conversion
13. Decimals
2
D, C
4
D, C, B, A
12. Basic rules of
algebra
23. Angles
4
D, C, B
2
D, C
24. Triangles, polygons
and constructions
3
D, C
1. Data collection
4
D, C, A, A*
15. Formulae
3
D, C, B
25. More equations and
formulae
2. Fractions, decimals
and percentages
26. Compound shapes
and 3-D objects
2
D, C, B, A
Working with numbers and the number system: N1.1, N1.2, N1.4,
N1.4h
Working with numbers and the number system: N1.2
Fractions, Decimals and Percentages: N2.3, N2.4
The Language of Algebra: N4.1, N4.2h
Expressions and Equations: N5.1, N5.1h, N5.4
Properties of angles and shapes: G1.1, G1.2
Measures and Construction: G3.6
Expressions and Equations: N5.4
Properties of angles and shapes: G1.1, G1.2, G1.3, G1.4
Measures and Construction: G3.8, G3.9, G3.10
The Data Handling Cycle: S1
Data Collection: S2.1, S2.2, S2.3, S2.4, S2.5
Data presentation and analysis: S3.1
The Language of Algebra: N4.2
Expressions and Equations: N5.6
Expressions and Equations: N5.4, N5.6, N5.8
3
D, C
4
D, C, A
© Pearon Education Limited 2010
Working with numbers and the number system: N1.14
Fractions, Decimals and Percentages: N2.5, N2.6, N2.7
Properties of angles and shapes: G1.6
Geometrical reasoning and calculation: G2.4
Mensuration: G4.1, G4.4
1
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Y11
AUTU
MN
TERM
Y10 SUMMER TERM
Y10 SPRING
TERM
14. Equations and
inequalities
30. Reflection,
translation and rotation
31. Enlargement
5
D, C, B
Expressions and Equations: N5.4, N5.4h, N5.7
3
D, C
2
D, C, A
32. Congruency and
similarity
5
C, B, A, A*
3. Interpreting and
representing data
11. Fractions
6
D, C, A, A*
4
D, C, B
8. Complex calculations
and accuracy
19. Linear graphs
7
C, B, A, A*
6
D, C, B, A
4. Range and averages
4
D, C, A
22. Number skills
1
18. Percentages
10. Factors, powers and
roots
3
2
D, C, B
D, C
Properties of angles and shapes: G1.7
Vectors: G5.1
Properties of angles and shapes: G1.7, G1.7h
Measures and Construction: G3.2
Properties of angles and shapes: G1.8
Geometrical reasoning and calculation: G2.3, G2.3h
Measures and Construction: G3.2h
Data presentation and analysis: S3.2, S3.2h
Data Interpretation: S4.2, S4.3, S4.4
Working with numbers and the number system: N1.2, N1.3, N1.5
Fractions, Decimals and Percentages: N2.1, N2.2
Working with numbers and the number system: N1.10h, N1.13h
Fractions, Decimals and Percentages: N2.7h
Expressions and Equations: N5.4h, N5.7h
Sequences, Functions and Graphs: N6.3, N6.4, N6.5h, N6.6h, N6.11,
N6.12
Data presentation and analysis: S3.3
Data Interpretation: S4.1
Working with numbers and the number system: N1.3, N1.4h, N1.14
Fractions, decimals and Percentages: N2.1, N2.5, N2.7
Ratio and Proportion: N3.1
Fractions, Decimals and Percentages: N2.6, N2.7, N2.7h
Working with numbers and the number system: N1.6, N1.7, N1.8
16. Indices and standard
form
5. Probability
27. Circles, cylinders,
cones and spheres
6
C, B, A, A*
7
7
D, C, B, A, A*
D, C, A, A*
7. Ratio and proportion
6. Cumulative frequency
6
5
D, C, B, A
B
28. Measures and
dimensions
3
D, C, B
© Pearon Education Limited 2010
Working with numbers and the number system: N1.9, N1.9h, N1.10h,
N1.11h, N1.12h
Probability: S5.1, S5.2, S5.3, S5.4, S5.5h, S5.6h, S5.7, S5.8, S5.9
Properties of angles and shapes: G1.5
Geometrical reasoning and calculation: G2.4
Mensuration: G4.1h, G4.3, G4.3h, G4.4, G4.5h
Ratio and Proportion: N3.1, N3.2, N3.3, N3.3h
Data presentation and analysis: S3.2h, S3.3h
Data Interpretation: S4.4
Measures and Construction: G3.4, G3.7
2
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Y11 SPRING
TERM
17. Sequences and proof
6
D, C, B, A, A*
Expressions and Equations: N5.9, N5.9h
Sequences, Functions and Graphs: N6.1, N6.2
20. Quadratic equations
7
B, A, A*
Expressions and Equations: N5.2h, N5.5h
29. Constructions and
loci
35. Non-linear graphs
3
C, B
Measures and Construction: G3.10, G3.11
9
D, C, B, A, A*
33. Pythagoras’ theorem
and trigonometry
7
C, B, A, A*
21. Further algebra
34. Circle theorems
37. Transformations of
graphs
38. Vectors
36. Further trigonometry
6
4
4
B, A, A*
B, A, A*
B, A*
Expressions and Equations: N5.2h, N5.5h
Sequences, Functions and Graphs: N6.7h, N6.8h, N6.10h, N6.11h,
N6.13
Working with numbers and the number system: N1.14h
Sequences, Functions and Graphs: N6.3h
Geometrical reasoning and calculation: G2.1, G2.1h, G2.2h
Expressions and Equations: N5.3h, N5.4h, N5.6
Properties of angles and shapes: G1.5h
Sequences, Functions and Graphs: N6.9h
4
7
A, A*
A, A*
Y11
SUMMER
TERM
© Pearon Education Limited 2010
Vectors: G5.1h
Sequences, Functions and Graphs: N6.8h
Geometrical reasoning and calculation: G2.2h
Mensuration: G4.2h
REVISION FOR JUNE EXAMS (29 HOURS)
3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Full Scheme of Work for Higher sets
Chapter 9 Estimation and currency conversion
Time: 2 hours
N1.1 Understand integers and place value to deal with arbitrarily large positive numbers.
N1.2 Add, subtract, multiply and divide any number.
N1.4 Approximate to a given power of 10, up to three decimal places and one significant figure.
N1.4h Approximate to specified or appropriate degrees of accuracy, including a given number of decimal places and significant figures.
Learning
objectives
AQA Linear
specification
reference
N1.4, N1.4h
N1.2
Grade
Resource
Common mistakes and misconceptions
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Number skills: multiplying and dividing (N1.1, N1.2); negative numbers (N1.2)
Check and estimate
D, C
Section 9.1
Finding an approximate value independent of the
answers to problems
context in which it is set.
Estimate answers to
Working out the actual answer instead of an
problems involving
approximation.
decimals
Giving an answer without reading the question
Make estimates and
carefully.
approximations of
calculations
Convert between
different currencies
© Pearon Education Limited 2010
D, C
Section 9.2
Forgetting to check the final answer to determine
whether it makes sense and, in this context, not
considering the relative size of units.
4
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Section
9.1
Section
9.2
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 13 Decimals
Time: 4 hours
N1.2 Add, subtract, multiply and divide any number.
N2.3 Use decimal notation and recognise that each terminating decimal is a fraction.
N2.4 Recognise that recurring decimals are exact fractions, and that some exact fractions are recurring decimals.
Learning
objectives
Grade
Resource
D, C
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 13.1
AQA Linear
specification
reference
N1.2
Multiply and divide
decimal numbers
Common mistakes and misconceptions
Working out the equivalent whole-number
multiplication but forgetting to return to the
decimal calculation at the end.
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
GPW
13.1
Section
13.1
GPW
13.2
Section
13.2
Confusing multiplication with the rules for
addition, writing a long multiplication with decimal
points underneath each other.
Trying to ‘move the decimal point back’ at the end
of a decimal division.
N2.3, N2.4
Convert decimals to
fractions
Convert fractions to
decimals
D, C
Section 13.2
N2.4
Understand
terminating and
recurring decimals
and their
relationships to
C, B
Section 13.3
© Pearon Education Limited 2010
Working with the incorrect power of 10.
Being confused by zeros in the middle of a
number.
Not understanding that recurring decimals are a
form of exact maths and therefore rounding
answers.
1
Confusing 0.3 with 3.
Not properly understanding the maths involved.
5
Section
13.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N2.4
fractions
Convert a recurring
decimal to a fraction
© Pearon Education Limited 2010
A
Section 13.4
Not being able to undertake the algebraic steps
required.
6
GPW
13.4
Section
13.4
Section
5.1
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 12 Basic rules of algebra
Time: 4 hours
N4.1 Distinguish the different roles played by letter symbols in algebra, using the correct notation.
N4.2h And ‘identity’.
N5.1 Manipulate algebraic expressions by collecting like terms, by multiplying a single term over a bracket, and by taking out common factors.
N5.1h Multiply two linear expressions.
N5.4 Set up and solve simple linear equations.
Learning
objectives
Grade
Resource
Multiply terms in a
bracket by a single
term outside the
bracket
Understand the
mathematical
meaning of
‘expression’ and
‘identity’
Simplify expressions
involving brackets
D, C
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 12.1
D, C
Section 12.2
Solve linear
equations with
brackets on one side
D
Section 12.3
AQA Linear
specification
reference
N4.2h, N5.1,
N5.4
N4.1, N5.1
N5.1
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Forgetting to multiply the second term in the
bracket by the term outside (e.g. expanding 2(x +
3) as 2x + 3), or ignoring minus signs (e.g. writing
3(m – 2) as 3m + 6).
Section
12.1
Forgetting to multiply the second term in the
bracket by the term outside.
Getting the wrong signs when multiplying
negative values.
Forgetting to multiply the second term in the
bracket by the term outside.
Not recognising when it is possible to divide both
sides of an equation by the same number to
reduce the number of steps of working.
Section
12.2
7
GPW
12.3
Section
12.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N5.1
N5.1h
Simplify algebraic
expressions by
taking out common
factors
Multiply two
algebraic
expressions with
brackets
Square a linear
expression
© Pearon Education Limited 2010
D, C, B
Section 12.4
Not correctly identifying factors of terms involving
powers of letters and numbers.
Not taking out the highest common factor.
GPW
12.4
Section
12.4
C, B
Section 12.5
Forgetting to multiply pairs of terms.
GPW
12.5
Section
12.5
8
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 23 Angles
Time: 2 hours
G1.1 Recall and use properties of angles at a point, angles at a point on a straight line (including right angles), perpendicular lines, and opposite angles at a
vertex.
G1.2 Understand and use the angle properties of parallel and intersecting lines, triangles and quadrilaterals.
G3.6 Understand and use bearings.
Learning
objectives
Grade
Resource
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
D
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Geometry skills: angles (G1.1)
Section 23.1
Confusing alternate and corresponding angles.
D, C
Section 23.2
GPW
23.2
AQA Linear
specification
reference
G1.1, G1.2
G3.6
Recognise
corresponding and
alternate angles
Calculate angles in
diagrams with
parallel lines
Measure the bearing
from one place to
another
Plot a bearing
Calculate bearings
for return journeys
Draw and interpret
scale diagrams to
represent journeys
© Pearon Education Limited 2010
Common mistakes and misconceptions
Confusing which angles need to be found.
Not realising that some of the angles asked for
can simply be read off the diagram.
9
Higher
sets
Practice
Book
Section
23.1
Section
23.2
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 24 Triangles, polygons and constructions
Time: 3 hours
N5.4 Set up and solve simple linear equations.
G1.1 Recall and use properties of angles at a point, angles at a point on a straight line (including right angles), perpendicular lines, and opposite angles at a
vertex.
G1.2 Understand and use the angle properties of parallel and intersecting lines, triangles and quadrilaterals.
G1.3 Calculate and use the sums of the interior and exterior angles of polygons.
G1.4 Recall the properties and definitions of special types of quadrilateral, including square, rectangle, parallelogram, trapezium, kite and rhombus.
G3.8 Measure and draw lines and angles.
G3.9 Draw triangles and other 2D shapes using a ruler and protractor.
G3.10 Use straight edge and a pair of compasses to do constructions.
Learning
objectives
Grade
Resource
G1.2
Use algebra to solve
angle problems in
triangles
D
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 24.1
G3.8, G3.9
Draw triangles
accurately when at
least one angle is
given
Use algebra to solve
angle problems in
quadrilaterals
Use parallel lines
and other angle
properties in
D
Section 24.2
D
Section 24.3
AQA Linear
specification
reference
G1.1, G1.4,
N5.4
© Pearon Education Limited 2010
Common mistakes and misconceptions
Trying to do too many steps in one go when
answering algebra-based questions.
Assuming that problems involving diagrams
where lines have a ‘thickness’ to them are harder
than they actually are.
Inaccurately using a protractor or compasses.
Not completing the triangle by drawing the third
side.
Rubbing out construction lines.
Working things out mentally without writing down
the calculations.
Giving correct answers but not explaining the
properties used.
Not showing full workings for the algebra
questions.
10
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
GPW
24.1
Section
24.1
Section
24.2
GPW
24.3
Section
24.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
G1.3, N5.4
G3.9, G3.10
quadrilaterals
Calculate the sum of
the interior angles of
a polygon
Use the exterior
angles of polygons
to solve problems
Draw regular
polygons by equal
division of a circle
© Pearon Education Limited 2010
D, C
Section 24.4
Incorrectly splitting the polygon into triangles.
D
Section 24.5
Measuring angles inaccurately.
Using a blunt pencil and poor compass use.
11
GPW
24.4
Section
24.4
Section
24.5
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 1 Data collection
Time: 4 hours
S1 Understand and use the statistical problem solving process which involves

specifying the problem and planning

collecting data

processing and presenting the data

interpreting and discussing the results.
S2.1 Types of data: qualitative, discrete, continuous. Use of grouped and ungrouped data.
S2.2 Identify possible sources of bias.
S2.3 Design an experiment or survey.
S2.4 Design data collection sheets distinguishing between different types of data.
S2.5 Extract data from printed tables and lists.
S3.1 Design and use two-way tables for grouped and ungrouped data.
Learning
objectives
Grade
Resource
Learn about the
data handling cycle
Know how to write
a hypothesis
Know where to look
for information
D
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 1.1
D
Section 1.2
Be able to identify
different types of
data
D
Section 1.3
AQA Linear
specification
reference
S1
S2.4
S2.1
© Pearon Education Limited 2010
Common mistakes and misconceptions
Formulating a hypothesis that cannot be
tested.
Thinking that a hypothesis is not valuable if it
is eventually proved false.
Not realising that data collected by a third
party (even if the results of a survey or
experiment) is classed as secondary data.
Not appreciating that some data can be
treated as either discrete or continuous
depending on the context (e.g. age – this is
really continuous, but is often treated as
discrete, such as when buying child or adult
12
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A* Practice
Book
Higher
sets
Practice
Book
Section
1.1
Section
1.2
Section
1.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
S2.4
S2.5, S3.1
S2.2, S2.3,
S2.4
S2.4
S2.4
Work out methods
for recording data
that can take a
wide range of
values
Work out methods
for recording
related data
Learn how to write
good questions to
find out information
Know the
techniques to use
to get a reliable
sample
Know how to take a
stratified sample
© Pearon Education Limited 2010
tickets).
Using overlapping class intervals.
Recording data which is on the boundary of a
class interval in the wrong class.
Section
1.4
Section 1.5
Not checking that the totals in two-way tables
add up.
Section
1.5
C
Section 1.6
Using overlapping classes, or gaps between
classes, for response options.
Section
1.6
C
Section 1.7
Mistaking biased samples for random
samples.
Section
1.7
A, A*
Section 1.8
Inaccurately calculating the sampling fraction.
Incorrectly rounding.
Section
1.8
D
Section 1.4
D
13
Section 1.1
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 15 Formulae
Time: 3 hours
N4.2 Distinguish in meaning between the words ‘equation’, ‘formula’, and ‘expression’.
N5.6 Derive a formula, substitute numbers into a formula and change the subject of a formula.
Learning
objectives
Grade
Resource
Use algebra to write
formulae in different
situations
Substitute numbers
into algebraic
expressions
Substitute numbers
into a variety of
formulae
D
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 15.1
D, C
Section 15.2
D, C, B
Section 15.3
Rearrange a formula
to make a different
variable the subject
of the formula
C, B
Section 15.4
AQA Linear
specification
reference
N4.2, N5.6
N5.6
N5.6
N5.6
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Not seeing the ‘general’ case.
Section
15.1
Confusing signs when substituting negative
numbers into expressions such as −4ac.
Ignoring BIDMAS.
n
1
Not realising that 10 means n ÷ 10, or that 2 × 6
1
means 2 of 6 = 3.
Ignoring BIDMAS.
Not using brackets or a clear division (e.g.
rewriting c = 2a + 5 as a = c − 5 ÷ 2).
Not using the inverse operation (e.g. x + y = z
becomes x = z + y).
Section
15.2
14
GPW
15.3
Section
15.3
GPW
15.4
Section
15.4
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 25 More equations and formulae
Time: 2 hours
N5.4 Set up and solve simple linear equations.
N5.6 Derive a formula, substitute numbers into a formula.
N5.8 Use systematic trail and improvement to find approximate solutions of equations where there is no simple analytical method of solving them.
Learning
objectives
Grade
AQA Linear
specification
reference
N5.4, N5.6
N5.8
Write your own
formulae and
equations
Substitute into a
formula to solve
problems
Change the subject
of a formula
Set up and solve
equations
Use trial and
improvement to find
solutions to
equations
© Pearon Education Limited 2010
D, C,
B, A
Resource
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 25.1
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Section
25.1
Section
8.3
Failing to recognise quadratic equations when
they arise from word problems.
Failing to consider the different terms of an
expression when changing the subject of a
formula (e.g. W = 12 x + 3  2W = x + 3).
Not using brackets or a clear division (e.g.
rewriting c = 2a + 5 as a = c − 5 ÷ 2).
Not using the inverse operation (e.g. x + y = z
becomes x = z + y).
C
Section 25.2
Not checking the mid-point to determine which of
two values is correct (e.g. choosing between x =
3.3 and x = 3.4 based on the value of the function
and the desired output).
Using the value of the equation as the answer
rather than the value of the variable.
15
GPW
25.2
Section
25.2
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 2 Fractions, decimals and percentages
Time: 3 hours
N1.14 Use calculators effectively and efficiently, including statistical functions.
N2.5 Understand that ‘percentage’ means ‘number of parts per 100’ and use this to compare proportions.
N2.6 Interpret fractions, decimals and percentages as operators.
N2.7 Calculate with fractions, decimals and percentages.
Learning
objectives
Grade
Resource
Find a fraction of an
amount with a
calculator in
complex situations
Write one quantity
as a fraction of
another
D
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 2.1
D
Section 2.2
N1.14
Use the fraction key
on a calculator with
mixed numbers
D, C
Section 2.3
N2.5, N2.7
Write one quantity
as a percentage of
another
Write one quantity
as a percentage of
another in more
complex situations
D, C
Section 2.4
AQA Linear
specification
reference
N2.6, N2.7
N2.7
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Incorrectly inputting numbers on the calculator.
Being unsure of what to work out when a fraction
calculation is set in context.
GPW
2.1
Section
2.1
Not making the denominator the total in questions
involving a number of quantities.
Working with quantities in different units.
Incorrectly cancelling down.
Not recognising or know how to use the fraction
key on a calculator.
Misinterpreting a mixed number on a calculator
display.
Not using the original amount as the
denominator, when finding a percentage
difference.
Working with quantities in different units.
GPW
2.2
Section
2.2
16
Section
2.3
Section
2.4
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N2.6, N2.7
N2.7
Calculate a
percentage increase
or decrease
Perform calculations
using VAT
Understand and use
the retail prices
index
Understand and use
the retail prices
index in more
complex situations
© Pearon Education Limited 2010
D
Section 2.5
D, C
Section 2.6
Giving the actual increase/decrease as the
answer when the amount after the
increase/decrease is what is required.
Using the multiplier as 1.5 rather than 1.05 for an
increase of 5%.
Using a previously found price instead of the
base year price.
17
Section
2.5
GPW
2.6
Section
2.6
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 26 Compound shapes and 3-D objects
Time: 4 hours
G1.6 Recognise reflection and rotation symmetry of 2D shapes.
G2.4 Use 2D representations of 3D shapes.
G4.1 Calculate perimeters and areas of shapes made from triangles and rectangles.
G4.4 Calculate volumes of right prisms and of shapes made from cubes and cuboids.
Learning
objectives
Grade
AQA Linear
specification
reference
G4.1
G1.6
G2.4
G4.4
G4.4
Find the perimeter
and area of
compound shapes
Identify the planes of
symmetry of 3-D
objects
Draw plans and
elevations of 3-D
objects
Find the volume and
surface area of a
prism
Find the volume and
surface area of a
pyramid
© Pearon Education Limited 2010
D
Resource
Common mistakes and misconceptions
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Geometry skills: area of simple shapes (G4.1)
Section 26.1
Incorrectly calculating missing lengths.
Adding areas instead of subtracting.
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Section
26.1
D
Section 26.2
Missing a plane of symmetry in objects where
there is more than one (e.g. triangular prisms).
Section
26.2
D
Section 26.3
Missing out hidden cubes when converting from a
3-D view to a plan or elevation.
Section
26.3
D, C
Section 26.4
Confusing volume and surface area.
A
Section 26.5
Using the slant height instead of the vertical
height in the volume formula.
18
GPW
26.4
Section
26.4
Section
26.5
Section
10.1
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 14 Equations and inequalities
Time: 5 hours
N5.4 Set up and solve simple linear equations.
N5.4h Including simultaneous equations in two unknowns.
N5.7 Solve linear inequalities in one variable and represent the solution set on a number line.
Learning
objectives
Grade
Resource
N5.4
Solve equations with
brackets
D, C
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 14.1
N5.4
Solve equations with
an unknown on both
sides of the equals
sign
D, C
Section 14.2
N5.4
Solve equations
involving fractions
C
Section 14.3
AQA Linear
specification
reference
Common mistakes and misconceptions
Forgetting to multiply the second term in the
bracket by the term outside.
Getting the wrong signs when multiplying
negative numbers.
Incorrectly simplifying after expanding the
bracket.
Introducing errors when there are a negative
number of unknowns on either side of the
equation.
Not appreciating that an equation can be written
in different but equivalent formats (e.g. 2a + 7 = 9
→ 7 + 2a = 9 → 9 = 2a + 7).
Incorrectly cancelling after multiplying by the
LCM.
Solving out of order (e.g.
N5.7
Solve inequalities
© Pearon Education Limited 2010
D, C, B
Section 14.4
x2
 8 : trying to do
4
−2 first).
Not reversing the sign when multiplying or
dividing by a negative.
Confusing the convention of an open circle for a
19
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Section
14.1
GPW
14.2
Section
14.2
Section
14.3
Section
14.4
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N5.4h
Solve a pair of
simultaneous
equations
© Pearon Education Limited 2010
B
Section 14.5
strict inequality and a closed circle for an included
boundary.
Adding equations when they should be
subtracted, and vice versa.
20
GPW
14.5
Section
14.5
Section
5.2
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 30 Reflection, translation and rotation
Time: 3 hours
G1.7 Describe and transform 2D shapes using single or combined rotations, reflections, translations, or enlargements by a positive scale factor and
distinguish properties that are preserved under particular transformations.
G5.1 Understand and use vector notation for translations.
Learning
objectives
Grade
Resource
Draw reflections on
a coordinate grid
Describe reflections
on a coordinate grid
Translate a shape
on a grid
Use column vectors
to describe
translations
D, C
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 30.1
D, C
Section 30.2
Draw the position of
a shape after
rotation about a
centre
Describe a rotation
fully, giving the size
and direction of turn
and the centre of
rotation
Transform shapes
D, C
Section 30.3
C
Section 30.4
AQA Linear
specification
reference
G1.7
G1.7, G5.1
G1.7
G1.7
© Pearon Education Limited 2010
Common mistakes and misconceptions
Drawing the image a different distance from the
mirror line than the object.
Incorrectly identifying mirror lines parallel to the xor y-axis.
Forgetting what the two values in the column
vector mean.
Using coordinate notation instead of vector
notation.
Confusing the terms ‘transformation’ and
‘translation’.
Working out the angle of rotation incorrectly.
Turning in the wrong direction.
Ignoring the centre of rotation when it is outside
the shape.
Not appreciating that two transformations, one
21
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Section
30.1
Section
30.2
GPW
30.3
Section
30.3
GPW
Section
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
using more than one
transformation
Describe combined
transformations of
shapes on a grid
© Pearon Education Limited 2010
followed by another, may be equivalent to a
single transformation.
Not understanding that for ‘general’ questions
where no shape is given, transformations can be
carried out on different shapes to investigate
what happens.
22
30.4
30.4
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 31 Enlargement
Time: 2 hours
G1.7 Describe and transform 2D shapes using single or combined rotations, reflections, translations, or enlargements by a positive scale factor and
distinguish properties that are preserved under particular transformations.
G1.7h Use positive fractional and negative scale factors.
G3.2 Understand the effect of enlargement for perimeter, area and volume of shapes and solids.
Learning
objectives
Grade
Resource
G1.7, G3.2
Enlarge a shape
using a centre of
enlargement
D
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 31.1
G1.7h
Enlarge a shape
using a fractional
scale factor
Enlarge a shape
using a negative
scale factor
C, A
Section 31.2
AQA Linear
specification
reference
© Pearon Education Limited 2010
Common mistakes and misconceptions
Inaccurately counting squares.
Adding the scale factor instead of multiplying by
the scale factor.
Not using the centre of enlargement.
Not using the centre of enlargement.
23
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
GPW
31.1
Section
31.1
GPW
31.2a, b
Section
31.2
Section
12.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 32 Congruency and similarity
Time: 5 hours
G1.8 Understand congruence and similarity.
G2.3 Justify simple geometrical properties.
G2.3h Simple geometrical proofs.
G3.2h Use the effect of enlargement for perimeter, area and volume in calculations.
Learning
objectives
Grade
Resource
C
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 32.1
B
AQA Linear
specification
reference
G1.8
G1.8
G1.8, G3.2h
G1.8, G2.3,
G2.3h
Understand
similarity and
congruency
Understand the
conditions for
congruent triangles
Recognise similar
shapes and
calculate the scale
factor between
similar shapes
Calculate areas and
volumes of similar
objects
Prove results in
geometry using
congruent triangles
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Wrongly matching corners, particularly if the
triangles are not the same way round.
Failing to spot the SSA case of two triangles that
are not congruent.
Section
32.1
Section 32.2
Matching up the vertices incorrectly.
Not getting the ratios right.
Section
32.2
A
Section 32.3
Incorrectly changing units having calculated an
area or volume.
Section
32.3
Section
12.1
A*
Section 32.4
Not setting out proofs in a logical fashion.
Section
32.4
Section
12.2
24
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 3 Interpreting and representing data
Time: 6 hours
S3.2 Produce charts and diagrams for various data types. Scatter graphs, stem-and-leaf, tally charts, pictograms, bar charts, dual bar charts, pie charts, line
graphs, frequency polygons, histograms with equal class intervals.
S3.2h Histograms with unequal class intervals, box plots, cumulative frequency diagrams, relative frequency diagrams.
S4.2 Look at data to find patterns and exceptions.
S4.3 Recognise correlation and draw and/or use lines of best fit by eye, understanding what they represent.
S4.4 Compare distributions and make inferences.
Learning
objectives
Grade
Resource
S3.2
Draw a stem-andleaf diagram
D
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 3.1
S3.2, S4.2,
S4.3
Draw and interpret
points on a scatter
diagram
Draw a line of best
fit
Use a line of best fit
Describe types of
correlation
Draw frequency
diagrams for
grouped data
D, C
Section 3.2
D
Section 3.3
Draw frequency
polygons for
grouped data
C
Section 3.4
AQA Linear
specification
reference
S3.2
S3.2, S4.4
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Forgetting to put a key and order the leaves.
Forgetting to recombine the stem and leaf and
just giving the leaf as the value.
Assuming that all the plotted points must be
joined with a line.
Drawing the diagram without spending time
working out the best scale.
Trying to make the line of best fit go through the
origin, rather than drawing it appropriately.
Section
3.1
Using grouped labels on the data axes (e.g. 15–
20, rather than the ends of the bar being clearly
marked with a 15 at one end and a 20 at the
other end).
Using a grouped label on the horizontal axis
rather than a continuous scale.
Plotting the upper bound instead of the mid-point.
Section
3.3
25
Section
3.2
Section
3.4
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
S3.2h
Draw a histogram
for grouped
continuous data
Interpret histograms
and make
conclusions
© Pearon Education Limited 2010
A, A*
Section 3.5
Not using the information in the diagram or table
correctly.
26
GPW
3.5
Section
3.5
Section
1.2, 1.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 11 Fractions
Time: 4 hours
N1.2 Add, subtract, multiply and divide any number.
N1.3 Understand and use number operations and the relationships between them, including inverse operations and hierarchy of operations.
N1.5 Order rational numbers.
N2.1 Understand equivalent fractions, simplifying a fraction by cancelling all common factors.
N2.2 Add and subtract fractions.
Learning
objectives
Grade
Resource
Compare fractions
with different
denominators
Add and subtract
fractions when both
denominators have
to be changed
D
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 11.1
D
Section 11.2
N2.2
Add and subtract
mixed numbers
C
Section 11.3
N1.2
Multiply a whole
number by a mixed
number
Multiply a fraction by
a mixed number
Multiply a mixed
D, C, B
Section 11.4
AQA Linear
specification
reference
N1.5, N2.1
N2.2
© Pearon Education Limited 2010
Common mistakes and misconceptions
Multiplying the denominator but not the
numerator when finding equivalent fractions.
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
GPW
11.1
Section
11.1
Section
11.2
Adding/subtracting the denominators as well as the
numerators.
Not converting to equivalent fractions to make the
denominators the same.
Incorrectly converting a mixed number to an
improper fraction.
Not converting the final answer back to a mixed
number.
Multiplying both the numerator and the
5
denominator by the whole number (e.g. 3 × 6 =
15
18).
27
GPW
11.3
Section
11.3
Section
11.4
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N1.3
N1.2
number by a mixed
number
Find the reciprocal
of a whole number,
a decimal or a
fraction
Divide a whole
number or a fraction
by a fraction
Divide mixed
numbers by whole
numbers or fractions
Divide mixed
numbers by mixed
numbers
© Pearon Education Limited 2010
C
Section 11.5
Leaving denominators as decimal numbers.
Not simplifying answers when asked to do so.
D, C, B
Section 11.6
Finding the reciprocal of the wrong fraction, or
finding the reciprocal of both fractions.
28
GPW
11.5
Section
11.5
Section
11.6
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 8 Complex calculations and accuracy
Time: 7 hours
N1.10h Interpret, order and calculate numbers written in standard index form.
N1.13h Calculate and use upper and lower bounds.
N2.7h Including reverse percentage calculations.
Learning
objectives
Grade
Resource
N2.7h
Perform calculations
involving repeated
percentage change
C
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 8.1
N2.7h
Perform reverse
percentage
calculations
Interpret and use
standard form
B
Section 8.2
B
Section 8.3
Identify the upper
and lower bounds of
discrete data and
continuous data
measured to whole
number values
Identify the upper
C, B, A
Section 8.4
AQA Linear
specification
reference
N1.10h
N1.13h
© Pearon Education Limited 2010
Common mistakes and misconceptions
Leaving the multiplier as a percentage, instead of
converting to a decimal.
Inaccurately converting to a decimal.
Not understanding compounding (e.g. treating
compound interest as simple).
Not realising which quantity corresponds to
100%.
Inaccurately converting from a factor of 10 to 10x
and vice versa.
Forgetting to include the minus signs in the power
for numbers less than 1.
Incorrectly entering a number in standard form on
a calculator.
Not being able to round to numbers other than
10, 100 or 1000 etc.
Incorrectly approaching calculations involving
bounds.
29
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
GPW
8.1
Section
8.1
Section
8.2
Section
8.3
Section
8.4
Section
4.1, 4.2,
11.1
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N1.13h
and lower bounds of
continuous data
measured to
decimal values
Solve problems
involving upper and
lower bounds
Calculate absolute
error and
percentage error
Calculate absolute
error and
percentage error in
more complex
situations
© Pearon Education Limited 2010
A, A*
Section 8.5
Not using the nominal value when calculating
percentage error.
30
Section
8.5
Section
4.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 19 Linear graphs
Time: 6 hours
N5.4h Including simultaneous equations in two unknowns.
N5.7h Solve linear inequalities in two variables, and represent the solution set on a suitable diagram.
N6.3 Use the conventions for coordinates in the plane and plot points in all four quadrants, including using geometric information.
N6.4 Recognise and plot equations that correspond to straight-line graphs in the coordinate plane, including finding their gradients.
N6.5h Understand that the form y = mx + c represents a straight line and that m is the gradient of the line and c is the value of the y-intercept.
N6.6h Understand the gradients of parallel lines.
N6.11 Construct linear functions from real-life problems and plot their corresponding graphs.
N6.12 Discuss, plot and interpret graphs (which may be non-linear) modelling real situations.
Learning
objectives
Grade
Resource
Common mistakes and misconceptions
N6.3
Find the mid-point of
a line segment
D, C
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 19.1
N6.4
Plot graphs of linear
functions
Work out
coordinates of points
of intersection when
two graphs cross
Understand the
meaning of m and c
in the equation y =
mx + c
Find the equation of
a line
Use a graphical
D, C
Section 19.2
B, A
Section 19.3
Forgetting the negative on the gradient.
Finding only the reciprocal (and not the negative
of the reciprocal) when finding the equation of a
perpendicular line.
B
Section 19.4
Forgetting to ensure that the individual lines are
AQA Linear
specification
reference
N6.5h, N6.6h
N5.4h
© Pearon Education Limited 2010
Subtracting the coordinates (instead of
calculating an average) when finding the midpoint.
Incorrectly calibrating the coordinate axes.
Not using a third point as a check when drawing
a straight line.
31
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Section
19.1
GPW
19.2
Section
19.2
GPW
19.3a, b
Section
19.3
Section
Section
7.2
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N5.7h
N6.11, N6.12
method to solve
simultaneous
equations
Solve inequalities
graphically
Draw, read and
interpret distance–
time and velocitytime graphs
Sketch and interpret
real-life graphs
© Pearon Education Limited 2010
B
Section 19.5
D, C, A
Section 19.6
drawn accurately.
Not appreciating that the graphical solutions to
simultaneous equations are only approximate.
Mixing up whether the lines should be dotted or
solid.
Shading the incorrect area.
Drawing and labelling axes before working out
the axes range appropriate to the problem.
Incorrectly converting between units of time.
32
19.4
Section
19.5
Section
19.6
Section
7.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 4 Range and averages
Time: 4 hours
S3.3 Calculate median, mean, range, mode and modal class.
S4.1 Interpret a wide range of graphs and diagrams and draw conclusions.
Learning
objectives
Grade
Resource
D, C
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 4.1
D, C
Section 4.2
Not appreciating that the statistics calculated from
grouped frequency tables are estimates.
Not understanding that the estimate for the range
is an upper limit.
GPW
4.2/4.3
Section
4.2
C
Section 4.3
Incorrectly calculating the mid-points of class
intervals for grouped discrete data (e.g. the midpoint of the class interval 10–19 is 14.5, not 15).
Interpreting ‘find an estimate for the mean’ as
‘guess the mean’.
GPW
4.2/4.3
Section
4.3
AQA Linear
specification
reference
S3.3, S4.1
S3.3, S4.1
S3.3, S4.1
Calculate the mean,
median, mode and
range from a
frequency table
Identify the modal
class from a
grouped frequency
table
Estimate the range
from a grouped
frequency table
Work out the class
interval which
contains the median
from data given in a
grouped frequency
table
Estimate the mean
from a grouped
frequency table
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Dividing by the number of rows in the frequency
table (i.e. the number of different data values),
not by the sum of the frequencies.
33
Higher
sets
Practice
Book
Section
4.1
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
S3.3, S4.1
Choose the most
appropriate average
and give reasons for
your choice
© Pearon Education Limited 2010
A
Section 4.4
Not appreciating that there are ‘standard’ reasons
for the choice of each average.
34
Section
4.4
Section
1.4
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 22 Number skills
Time: 1 hour
N1.3 Understand and use number operations and the relationships between them, including inverse operations and hierarchy of operations.
N1.4h Approximate to specified or appropriate degrees of accuracy including a given number of decimal places and significant figures.
N1.14 Use calculators effectively and efficiently.
N2.1 Understand equivalent fractions, simplifying a fraction by cancelling all common factors.
N2.5 Understand that ‘percentage’ means ‘number of parts per 100’ and use this to compare proportions.
N2.7 Calculate with fractions, decimals and percentages.
N3.1 Use ratio notation, including reduction to its simplest form and its various links to fraction notation.
Learning
objectives
AQA Linear
specification
reference
N1.3, N1.4h,
N1.14, N2.1,
N2.5, N2.7,
N3.1
Understand
equivalent fractions
Simplify a fraction by
cancelling all
common factors
Recognise that each
terminating decimal
is a fraction
Convert simple
fractions to
percentages and
vice versa
Understand that
‘percentage’ means
‘number of parts per
100’ and use this to
compare proportions
© Pearon Education Limited 2010
Grade
Resource
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Chapter 22
Common mistakes and misconceptions
Forgetting to multiply/divide both the numerator
and denominator when finding equivalent
fractions and simplifying fractions.
Applying an incorrect understanding of
‘reciprocal’.
Writing the ratio in the incorrect order.
Forgetting to use BIDMAS when using calculators
to perform calculations.
Not giving an answer in the context of the
problem.
Treating the digits each side of the decimal point
as separate whole numbers, so that 0.95 rounded
to 1 d.p. = 0.1.
35
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Chapter
22
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Understand
‘reciprocal’ as
multiplicative inverse
Use ratio notation,
including reduction
to its simplest form
Use brackets and
the hierarchy of
operations
Use calculators
effectively and
efficiently; using an
extended range of
function keys
Use inverse
operations
Round to a given
number of significant
figures
Select and justify
appropriate degrees
of accuracy for
answers to problems
© Pearon Education Limited 2010
Dropping zeros when rounding to a number of
significant figures (e.g. 5840 = 6 to 1 s.f.).
36
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 18 Percentages
Time: 3 hours
N2.6 Interpret fractions, decimals, percentages as operators.
N2.7 Calculate with fractions, decimals and percentages.
N2.7h Including reverse percentage calculations.
Learning
objectives
Grade
AQA Linear
specification
reference
Resource
Common mistakes and misconceptions
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Number skills: percentage calculations (N2.7)
Section 18.1
Giving the actual increase/decrease as the
answer when the amount after the
increase/decrease is what is required.
Using the multiplier as 1.5 rather than 1.05 for an
increase of 5%.
Writing ‘=’ between quantities that are not equal,
because the ‘=’ sign is used as a shorthand for
‘then I do this’.
Section 18.2
Confusing cost price and selling price.
N2.6, N2.7
Calculate a
percentage increase
or decrease
Perform calculations
involving VAT
D
N2.7
Calculate a
percentage profit or
loss
Perform calculations
involving repeated
percentage changes
C
C
Section 18.3
Not understanding when the multiplier should be
greater than or less than 1.
Using the multiplier as 1.5 rather than 1.05 for an
increase of 5%.
Perform calculations
involving finding the
original quantity
B
Section 18.4
Not recognising that the problem is not a
straightforward percentage increase/decrease
question.
Not using the correct multiplier.
N2.7
N2.7h
© Pearon Education Limited 2010
37
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
GPW
18.1
Section
18.1
GPW
18.2
Section
18.2
GPW
18.3
Section
18.3
Section
18.4
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 10 Factors, powers and roots
Time: 2 hours
N1.6 The concepts and vocabulary of factor (divisor), multiple, common factor, highest common factor, least common multiple, prime number and prime factor
decomposition.
N1.7 The terms square, positive and negative square root, cube and cube root.
N1.8 Index notation for squares, cubes and powers of 10.
Learning
objectives
Grade
Resource
D, C
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 10.1
D, C
Section 10.2
D, C
Section 10.3
C
Section 10.4
AQA Linear
specification
reference
N1.6
N1.6
N1.7, N1.8
N1.6
Find lowest common
multiples
Find highest
common factors
Understand the
difference between
positive and
negative square
roots
Evaluate
expressions
involving squares,
cubes and roots
Write a number as a
product of prime
factors using index
notation
Use prime factors to
find HCFs and
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Multiplying numbers with a common factor when
attempting to find the LCM.
Forgetting whether it is the highest or lowest
common factor that needs to be found.
Writing 36 = –6 or 36 = ±6 when finding the
negative square root.
GPW
10.1/10.2
GPW
10.1/10.2
Section
10.1
Section
10.2
Section
10.3
Not identifying the prime factors that appear in
the decompositions of both numbers when
finding the HCF.
GPW
10.4
Section
10.4
38
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
LCMs
© Pearon Education Limited 2010
39
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 16 Indices and standard form
Time: 6 hours
N1.9 Index laws for multiplication and division of integer powers.
N1.9h Fractional and negative powers.
N1.10h Interpret, order and calculate numbers written in standard index form.
N1.11h Surds and π in exact calculations.
N1.12h Rules of arithmetic applied to calculations and manipulations with surds.
Learning
objectives
Grade
Resource
C, B, A
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 16.1
AQA Linear
specification
reference
N1.9
N1.9h
Use laws of indices
to multiply and
divide numbers
written in index
notation
Use laws of indices
to calculate powers
and roots of
numbers written
using index
notation
Calculate using
negative integer
powers, and
powers of 0 and 1
Use laws of indices
to work out positive
and negative
© Pearon Education Limited 2010
B, A,
A*
Section 16.2
Common mistakes and misconceptions
Support and homework
Extension
Higher sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Adding indices when calculating a power of a
power.
Rewriting the second power as a
multiplication [e.g. (56)3 = 56 × 56 × 56].
GPW
16.1/16.2/16.3
Section
16.1
Section
6.1
Calculating 4–2 as –16.
GPW
16.1/16.2/16.3
Section
16.2
Section
6.2
40
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N1.10h
N1.11h,
N1.12h
fractional powers of
whole numbers
Carry out
calculations with
numbers given in
standard form
Multiply and divide
expressions
involving surds
Use surds to give
exact answers to
calculations
Simplify
expressions
involving surds
© Pearon Education Limited 2010
B
Section 16.3
Not converting the answers to calculations
back into standard form (e.g. 32 × 10–4 
3.2 × 10–3).
GPW
16.1/16.2/16.3
Section
16.3
A, A*
Section 16.4
Failing to rationalise terms like
multiplying out brackets.
GPW 16.4
Section
16.4
41
2×
8 when
Section
6.3, 6.4,
6.5
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 5 Probability
Time: 7 hours
S5.1 Understand and use the vocabulary of probability and the probability scale.
S5.2 Understand and use estimates or measures of probability from theoretical models (including equally likely outcomes), or from relative frequency.
S5.3 List all outcomes for single events, and for two successive events, in a systematic way and derive related probabilities.
S5.4 Identify different mutually exclusive outcomes and know that the sum of the probabilities of all these outcomes is 1.
S5.5h Know when to add or multiply two probabilities: if A and B are mutually exclusive, then the probability of A or B occurring is P(A) + P(B), whereas if A
and B are independent events, the probability of A and B occurring is P(A) × P(B).
S5.6h Use tree diagrams to represent outcomes of compound events, recognising when events are independent.
S5.7 Compare experimental data and theoretical probabilities.
S5.8 Understand that if an experiment is repeated, this may – and usually will – result in different outcomes.
S5.9 Understand that increasing sample size generally leads to better estimates of probability and population characteristics.
Learning
objectives
Grade
Resource
D
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 5.1
D
C
AQA Linear
specification
reference
S5.1, S5.3,
S5.4
S5.2
S5.2, S5.7,
Understand and use
the fact that the sum
of the probabilities of
all mutually
exclusive outcomes
is 1
Predict the likely
number of
successful events
given the probability
of any outcome and
the number of trials
or experiments
Estimate
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Adding or subtracting the incorrect values due to
misreading the question.
GPW
5.1
Section
5.1
Section 5.2
Incorrectly finding fractions of an amount.
Not cancelling a fraction to its simplest form.
GPW
5.2
Section
5.2
Section 5.3
Trying to plot decimals worked out to three
42
Section
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
S5.8, S5.9
probabilities from
experimental data
S5.5h
Calculate the
probability of two
independent events
happening at the
same time
Use and understand
tree diagrams in
simple contexts
Use the ‘and’ and
‘or’ rules in tree
diagrams
Use and understand
tree diagrams with
two or more events
for conditional
probabilities
S5.6h
S5.5h, S5.6h
© Pearon Education Limited 2010
decimal places or more.
Comparing theoretical probability with relative
frequency without taking into account the number
of trials carried out.
Not recognising when a question involves
independent events and so adding rather than
multiplying the fractions.
5.3
C
Section 5.4
B, A,
A*
Section 5.5
Adding probabilities along the branch rather than
multiplying.
Missing either the P(1 head) or P(more than 1
head) when asked to find P(at least 1 head).
Section
5.5
Section
2.1
A*
Section 5.6
Forgetting to reduce the denominator by 1.
Not recognising when to add and when to
multiply probabilities.
Section
5.6
Section
2.2
43
GPW
5.4
Section
5.4
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 27 Circles, cylinders, cones and spheres
Time: 7 hours
G1.5 Distinguish between centre, radius, chord, diameter, circumference, tangent, arc, sector and segment.
G2.4 Use 2D representations of 3D shapes.
G4.1h Extend to other compound shapes.
G4.3 Calculate circumferences and areas of circles.
G4.3h Calculate lengths of arcs and areas of sectors.
G4.4 Calculate volumes of right prisms and of shapes made from cubes and cuboids.
G4.5h Solve mensuration problems involving more complex shapes and solids.
Learning
objectives
Grade
Resource
D, C
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 27.1
C
Section 27.2
AQA Linear
specification
reference
G1.5, G4.1h,
G4.3, G4.3h
G2.4, G4.4
Calculate the
circumference of a
circle
Calculate the area of
a circle
Calculate the
perimeter of
compound shapes
involving circles or
parts of circles
Calculate the area of
compound shapes
involving circles or
parts of circles
Calculate the
volume of a cylinder
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Not multiplying by 2 when the radius is given and
the diameter is needed.
Multiplying by  before squaring.
Dividing by  before taking a square root.
Failing to correctly follow the order of operations
when calculating the area or finding the radius
given the area.
Section
27.1
Multiplying by  before squaring.
Failing to square or take the root at the
Section
27.2
44
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
G4.3h
G4.5h
G4.5h
Solve problems
involving the surface
area of cylinders
Calculate the
lengths of arcs
Calculate the area of
sectors
Calculate the
volume and surface
area of a cone
Solve problems
involving frustums of
cones
Calculate the
volume and surface
area of a sphere
© Pearon Education Limited 2010
appropriate point.
A
Section 27.3
Forgetting to multiply by /360 when calculating
arc length or sector area.
GPW
27.3
Section
27.3
Section
10.2
A, A*
Section 27.4
Not being able to find the height of the original
cone when finding the volume of a frustum.
GPW
27.4
Section
27.4
Section
10.3
A
Section 27.5
Not following the order of operations when using
the formulae.
Section
27.5
Section
10.4
45
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 7 Ratio and proportion
Time: 6 hours
N3.1 Use ratio notation, including reduction to its simplest form and its various links to fraction notation.
N3.2 Divide a quantity in a given ratio.
N3.3 Solve problems involving ratio and proportion, including the unitary method of solution.
N3.3h Repeated proportional change. Direct and indirect proportion and exponential growth.
Learning
objectives
Grade
Resource
N3.1, N3.3
Use a ratio in
practical situations
D
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 7.1
N3.1, N3.3
Write a ratio as a
fraction
Use a ratio to find
one quantity when
the other is known
Write a ratio in the
form 1 : n or n : 1
D, C
Section 7.2
C
Section 7.3
Share a quantity in a
given ratio
Solve word
problems involving
ratio
Understand direct
proportion
D, C
Section 7.4
D, C
Section 7.5
AQA Linear
specification
reference
N3.3
N3.2, N3.3
N3.3
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Not multiplying or dividing all quantities by the
same amount when scaling quantities up or
down.
Simplifying ratios without ensuring the quantities
are in the same units.
Turning a ratio into a fraction (e.g. the ratio 4 : 5
4
becomes 5).
Failing to find the value of the unit fraction in
more complex problems.
Ignoring different units in a ratio (e.g. simplifying 2
days : 15 hours to 1 : 7½) .
Giving a ratio as 1 : n when n : 1 is asked for.
Not multiplying both sides of the ratio by the
same number.
Giving an answer without considering the context.
GPW
7.1
Section
7.1
GPW
7.2
Section
7.2
GPW
7.4
Section
7.4
Not always seeing the relationships between
numbers (e.g. if the cost of 4 items is given, and
GPW
7.5
Section
7.5
46
Section
7.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N3.3
N3.3, N3.3h
N3.3, N3.3h
Solve proportion
problems, including
using the unitary
method
Work out which
product is the better
buy
Understand inverse
proportion
Write and use an
equation to solve
proportion problems
Write and use an
equation to solve
inverse proportion
problems
© Pearon Education Limited 2010
the price of 8 is asked for).
Not making the units the same for each item.
C, B
Section 7.6
A
Section 7.7
A
Section 7.8
Dividing instead of multiplying when finding the
time taken for fewer people.
Writing the initial statement y = kx or y = kx2
incorrectly.
Forgetting to substitute the found value of k into
the original statement.
k
k
Writing the initial statement y = x or y = x2 etc.
incorrectly.
Forgetting to substitute the found value of k into
the original statement.
47
GPW
7.7
Section
7.6
Section
7.7
Section
3.1, 3.2
GPW
7.8
Section
7.8
Section
3.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 6 Cumulative frequency
Time: 5 hours
S3.2h Histograms with equal or unequal class intervals, box plots, cumulative frequency diagrams, relative frequency diagrams.
S3.3h Quartiles and inter-quartile range.
S4.4 Compare distributions and make inferences.
Learning
objectives
Grade
Resource
B
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 6.1
B
B
AQA Linear
specification
reference
S3.2h, S3.3h
S3.2h
S3.2h, S4.4
Compile a
cumulative
frequency table and
draw cumulative
frequency diagrams
Use cumulative
frequency diagrams
to analyse data
Learn how to draw a
box plot from a
cumulative
frequency diagram
Use cumulative
frequency diagrams
and box plots to
compare data and
draw conclusions
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Mis-reading the graph axes scales.
Inaccurately summing the frequencies.
Section
6.1
Section 6.2
Mis-reading the medians and quartiles.
Drawing the lower end of the box plot at zero,
rather than at the bottom of the lowest class.
Section
6.2
Section 6.3
Inaccurately plotting cumulative frequency
diagrams and box plots.
Not appreciating the need for a coherent written
analysis of diagrams.
Section
6.3
48
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 28 Measures and dimensions
Time: 3 hours
G3.4 Convert measurements from one unit to another.
G3.7 Understand and use compound measures.
Learning
objectives
Grade
Resource
Support and
homework
Extension
D, C
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 28.1
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Multiplying by 100 when converting from m 3 to
cm3.
GPW
28.1
Section
28.1
D, C
Section 28.2
Not remembering the formulae.
Confusing the decimal parts of an hour with
hours and minutes (e.g. using 1 hour 45 minutes
as 1.45 hours).
GPW
28.2/28.3
Section
28.2
Section
11.1
C, B
Section 28.3
Not remembering the formulae.
Using the wrong formula.
GPW
28.2/28.3
Section
28.3
Section
11.1
B
Section 28.4
Not appreciating that for an expression to
represent a quantity every term must have the
same dimension.
AQA Linear
specification
reference
G3.4, G3.7
G3.7
G3.7
G3.7
Convert between
different units of
area
Convert between
different units of
volume
Calculate average
speeds
Solve problems
involving average
speeds using upper
and lower bounds
Make calculations
involving density
Solve problems
involving density
using upper and
lower bounds
Recognise formulae
for length, area or
volume by
© Pearon Education Limited 2010
Common mistakes and misconceptions
49
Section
28.4
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
considering
dimensions
© Pearon Education Limited 2010
Not recognising that the analysis can be
simplified by removing constants and substituting
in the correct units for each variable.
50
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 17 Sequences and proof
Time: 6 hours
N5.9 Use algebra to support and construct arguments.
N5.9h Use algebra to construct simple proofs.
N6.1 Generate terms of a sequence using term-to-term and position-to-term definitions of the sequence.
N6.2 Use linear expressions to describe the nth term of an arithmetic sequence.
Learning
objectives
Grade
Resource
C
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 17.1
C
Section 17.2
D, C
Section 17.3
D, C,
B, A
Section 17.4
AQA Linear
specification
reference
N6.2
N6.2
N6.1
N5.9
Find the nth term of
a linear sequence
Find the nth term for
a sequence of
diagrams
Given a quadratic
nth term find the first
few terms in the
sequence
Find the next few
terms of a quadratic
sequence by looking
at differences
Find the nth term of
a simple quadratic
sequence
Understand the
difference between
a practical
demonstration and a
© Pearon Education Limited 2010
Common mistakes and misconceptions
Mistaking x2 for 2x.
Not making the connection between the structure
of the physical pattern and the form the nth term
takes.
Mistaking x2 for 2x.
Thinking that (3x)2 = 3x2.
Not checking whether the derived quadratic rule
works.
Not appreciating that a proof shows something
works for all values.
51
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
GPW
17.1
Section
17.1
Section
17.2
GPW
17.3
Section
17.3
GPW
17.4
Section
17.4
Section
7.1
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N5.9
N5.9, N5.9h
proof
Prove statements
using logical short
chains of deductive
reasoning
Show that
something is false
by using a counterexample
Prove statements
using logical short
chains of deductive
reasoning
© Pearon Education Limited 2010
C
Section 17.5
Assuming that ‘number’ means positive whole
number.
Not identifying an appropriate counter-example.
Section
17.5
B, A,
A*
Section 17.6
Thinking there is only one way of factorising an
expression.
Section
17.6
52
Section
7.1
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 20 Quadratic equations
Time: 7 hours
N5.2h Factorise quadratic expressions, including the difference of two squares.
N5.5h Solve quadratic equations.
Learning
objectives
Grade
Resource
B, A
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 20.1
B
Section 20.2
Looking for numbers whose sum is c and product
b.
GPW
20.2
Section
20.2
B
Section 20.3
Forgetting that there are two solutions to a
quadratic equation.
GPW
20.3
Section
20.3
A, A*
Section 20.4
Forgetting that there are two solutions to a
quadratic equation.
GPW
20.4
Section
20.4
Section
8.2, 8.3
A, A*
Section 20.5
Forgetting that the square of a negative number
is a positive, so there can be two solutions
Section
20.5
Section
8.4, 8.5
AQA Linear
specification
reference
N5.2h
N5.2h
N5.2h, N5.5h
N5.2h, N5.5h
N5.5h
Factorise a
quadratic expression
that is the difference
of two squares
Factorise a
quadratic expression
of the form x2+ bx +
c
Solve quadratic
equations by
rearranging
Solve quadratic
equations by
factorising
Solve quadratic
equations by
factorising
Factorise quadratic
expressions of the
form ax2 + bx + c
Solve quadratic
equations by using
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Section
20.1
Section
8.1
Incorrectly expanding brackets (e.g. expanding (x
– 3)2 as x2 – 9).
53
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N5.5h
the quadratic
formula
Decide how many
solutions a quadratic
equation has by
considering
the discriminant
Solve a quadratic
equation by
completing the
square
© Pearon Education Limited 2010
when you find the square root.
A*
Section 20.6
Incorrectly expanding brackets (e.g. expanding
(x + 3)2 as x2 + 9).
54
Section
20.6
Section
8.6
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 29 Constructions and loci
Time: 3 hours
G3.10 Use straight edge and a pair of compasses to do constructions.
G3.11 Construct loci.
Learning
objectives
Grade
Resource
C
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 29.1
C, B
Section 29.2
AQA Linear
specification
reference
G3.10
G3.11
Construct
perpendiculars
Construct the
perpendicular
bisector of a line
segment
Construct angles of
90° and 60°
Construct the
bisector of an angle
Solve locus
problems, including
the use of bearings
Construct loci
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Failing to keep the settings of compasses
constant.
Rubbing out construction lines.
Not using compasses.
GPW
29.1
Section
29.1
Confusing a distance from a point with the
distance from a line.
Making inaccurate constructions.
Shading the wrong region.
GPW
29.2
Section
29.2
55
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 35 Non-linear graphs
Time: 9 hours
N5.2h Factorise quadratic expressions, including the difference of two squares.
N5.5h Solve quadratic equations.
N6.7h Find the intersection points of the graphs of a linear and quadratic function, knowing that these are the approximate solutions of the corresponding
simultaneous equations representing the linear and quadratic functions.
N6.8h Draw, sketch, recognise graphs of simple cubic functions, the reciprocal function y = 1/x with x ≠ 0, the function y = kx for integer values of x and simple
positive values of k, the circular functions y = sin x and y = cos x.
N6.10h Construct the graphs of simple loci.
N6.11h Construct quadratic and other functions from real life problems and plot their corresponding graphs.
N6.13 Generate points and plot graphs of simple quadratic functions, and use these to find approximate solutions.
Learning
objectives
AQA Linear
specification
reference
N6.13
N6.7h
N5.5h
N6.8h
Draw quadratic
graphs
Identify the line of
symmetry of a
quadratic graph
Solve quadratic
equations
graphically
Use quadratic
equations to solve
problems
Draw cubic graphs
Solve cubic
equations
© Pearon Education Limited 2010
Grade
Resource
Common mistakes and misconceptions
Support and
homework
Extension
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Algebra skills: quadratic expressions (N5.2h, N5.5h)
D, C
Section 35.1
Drawing the bottom of the graph flat when a
graph has its vertex between two plotted points.
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
GPW
35.1
Section
35.1
C, B,
A, A*
Section 35.2
Forgetting to write down all the solutions.
Not showing their method of subtraction.
GPW
35.2
Section
35.2
Section
15.1
A*
Section 35.3
Giving answers without considering the context of
the problem.
Section
35.3
Section
15.2
B
Section 35.4
Incorrectly finding the cube of a negative number.
Forgetting to write down all the solutions.
Section
35.4
56
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
N6.8h
N6.8h
N6.10h,
N6.11h
graphically
Draw reciprocal
graphs
Identify the
asymptotes of
reciprocal graphs
Draw graphs of
combined functions
Draw exponential
graphs
Solve real-life
problems involving
exponential growth
and decay
Recognise and use
non-linear graphs
© Pearon Education Limited 2010
A, A*
Section 35.5
Incorrectly working out values when using a
calculator.
Section
35.5
Section
15.3
A, A*
Section 35.6
Incorrectly working out values when using a
calculator.
Not considering whether the plotted graph agrees
with the general shape of an exponential function.
Section
35.6
Section
15.4
C, B, A
Section 35.7
Incorrectly interpreting rate of change graphs
where axes have no numbers.
Section
35.7
Section
15.3, 15.4
57
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 33 Pythagoras’ theorem and trigonometry
Time: 7 hours
N1.14h Including trigonometrical functions.
N6.3h 3D coordinate systems.
G2.1 Use Pythagoras’ theorem.
G2.1h Extend to use in 3D.
G2.2h Use the trigonometrical ratios and the sine and cosine rules to solve 2D and 3D problems.
Learning
objectives
Grade
Resource
C
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 33.1
B
B
AQA Linear
specification
reference
G2.1
G2.2h, N1.14h
G2.2h
Calculate the length
of a missing side in
a right-angled
triangle using
Pythagoras’ theorem
Solve problems
using Pythagoras’
theorem
Calculate the length
of a line segment AB
Understand and
recall trigonometric
ratios in right-angled
triangles
Know how to enter
the trigonometric
functions on a
calculator
Use trigonometric
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Forgetting to take the square root to find the final
answer.
Not identifying the appropriate information when
problems are set in context.
Drawing a scale diagram when asked to calculate
the length of a hypotenuse.
Section
33.1
Section 33.2
Forgetting that the sine, cosine and tangent ratios
only apply to right-angled triangles.
Incorrectly using the trigonometric function keys
on a calculator.
Drawing a diagram that does not accurately
represent the problem.
Section
33.2
Section 33.3
Forgetting that the sine, cosine and tangent ratios
Section
58
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
G2.2h
ratios to find lengths
in right-angled
triangles
Use trigonometric
ratios to find the
angles in rightangled triangles
Use trigonometric
ratios and
Pythagoras’ theorem
to solve problems
C, B, A
Section 33.4
G2.2h
Solve problems
using an angle of
elevation or an
angle of depression
B
Section 33.5
G2.1h, G2.2h
Use Pythagoras’
theorem in 3-D
Use trigonometric
ratios in 3-D
contexts
Find the angle
between a line and a
plane
A, A*
Section 33.6
only apply to right-angled triangles.
Not correctly identifying the opposite, adjacent
and hypotenuse.
Incorrectly using the trigonometric function keys
on a calculator.
33.3
Not identifying the appropriate information when
problems are set in context.
Drawing a diagram that incorrectly represents the
problem.
Rounding off values during the intermediate steps
of a calculation.
Not identifying the appropriate information when
problems are set in context.
Drawing a diagram that incorrectly represents the
problem.
Rounding off values during the intermediate steps
of a calculation.
Drawing a diagram that incorrectly represents the
problem.
Rounding off values during the intermediate steps
of a calculation.
Section
33.4
Section 33.7 Teacher Guide only (N6.3h)
© Pearon Education Limited 2010
59
Section
13.1
Section
33.5
GPW
33.6
Section
33.6
Section
13.2, 13.3
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 21 Further algebra
Time: 6 hours
N5.3h Simplify rational expressions.
N5.4h Including simultaneous equations in two unknowns.
N5.6 Derive a formula, substitute numbers into a formula and change the subject of a formula.
Learning
objectives
Grade
Resource
A*
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 21.1
AQA Linear
specification
reference
N5.4h
N5.3h
N5.6
Solve simultaneous
equations when one
is linear and one is
quadratic
Simplify, add,
subtract, multiply
and divide algebraic
fractions and use
them to solve
equations
Change the subject
of a formula when
the subject appears
more than once
and/or on both sides
of the formula
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Section
21.1
Section
9.1
Introducing simple arithmetic errors.
B, A,
A*
Section 21.2
Cancelling across plus and minus signs.
Introducing simple arithmetic errors.
GPW
21.2
Section
21.2
Section
9.2, 9.3
A, A*
Section 21.3
Incorrectly factorising or expanding.
GPW
21.3
Section
21.3
Section
9.4
60
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 34 Circle theorems
Time: 4 hours
G1.5h Know and use circle theorems.
Learning
objectives
Grade
Resource
G1.5h
Use chord and
tangent properties to
solve problems
B
AQA GCSE
Maths Higher
sets Student
Book; Higher
sets Teacher
Guide
Section 34.1
G1.5h
Use circle theorems
and circle properties
to solve geometrical
problems
Recall proofs of
circle theorems
Use the alternate
segment theorem to
find missing angles
and solve problems
Recall the proof of
the alternate
segment theorem
B, A
Section 34.2
A, A*
Section 34.3
AQA Linear
specification
reference
G1.5h
© Pearon Education Limited 2010
Common mistakes and misconceptions
Giving answers but not explaining the properties
used.
Not appreciating that listing the unknown facts
can help progress the solution to the problem.
Mistaking chords for diameters and therefore
incorrectly identifying the subtended angle as
90°.
Not correctly identifying pairs of angles.
61
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Section
34.1
GPW
34.2/34.3
Section
34.2
Section
14.1
GPW
34.2/34.3
Section
34.3
Section
14.2
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 37 Transformations of graphs
Time: 4 hours
N6.9h Transformations of functions.
Learning
objectives
Grade
Resource
B
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 37.1
A*
Section 37.2
A*
Section 37.3
AQA Linear
specification
reference
N6.9h
N6.9h
N6.9h
Understand and use
function notation
Use transformations
to change the
position of graphs
Recognise how
graphs are related
by examining their
equations
Use transformations
to change the
position of
trigonometric graphs
Recognise how
trigonometric graphs
are related by
examining their
equations
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
A-A*
Practice
Book
Higher
sets
Practice
Book
Not appreciating the shorthand nature of function
notation.
Misunderstanding the ‘transformation rules’.
Not identifying the basic function.
Section
37.1
Section
37.2
Section
17.1
Confusing the graphs of y = cos x and y = sin x.
Section
37.3
Section
17.2
Not using the correct format to describe
transformations.
62
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 38 Vectors
Time: 4 hours
G5.1h Understand and use vector notation; calculate, and represent graphically the sum of two vectors, the difference of two vectors and a scalar multiple of
a vector; calculate the resultant of two vectors; understand and use the commutative and associative properties of vector addition; solve simple geometrical
problems in 2D using vector methods.
Learning
objectives
Grade
Resource
A
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 38.1
A
A*
AQA Linear
specification
reference
G5.1h
G5.1h
G5.1h
Know the difference
between a vector
and a scalar
Represent vectors
graphically, using
the correct notation
Use the triangle or
parallelogram law
for vector addition
Calculate the
resultant of two
vectors
Solve geometry
problems using
vector methods
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Getting the directions of the arrows wrong.
Section
38.1
Section
18.1
Section 38.2
Incorrectly manipulating vectors.
Section
38.2
Section
18.1
Section 38.3
Incorrectly interpreting or drawing diagrams.
Section
38.3
Section
18.2
63
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
Chapter 36 Further trigonometry
Time: 7 hours
N6.8h Draw, sketch, recognise graphs of simple cubic functions, the reciprocal function y = 1/x with x [not equals sign] 0, the function y = kx for integer values
of x and simple positive values of k, the circular functions y = sin x and y = cos x.
G2.2h Use the trigonometrical ratios and the sine and cosine rules to solve 2D and 3D problems.
G4.2h Calculate the area of a triangle using ½ ab sin C.
Learning
objectives
Grade
Resource
A
AQA GCSE Maths
Higher sets
Student Book;
Higher sets
Teacher Guide
Section 36.1
A*
Section 36.2
A, A*
Section 36.3
AQA Linear
specification
reference
N6.8h
G2.2h
G2.2h, G4.2h
G2.2h
G2.2h
Recognise, draw
and sketch the
graphs of y = sin θ
and y = cos θ
Solve trigonometric
equations
Use trigonometry to
calculate the area of
a triangle
Use trigonometry to
calculate the area of
a segment of a circle
Use the sine rule to
find a length or an
angle
Solve more complex
trigonometric
problems
Use the cosine rule
to find a length or an
© Pearon Education Limited 2010
Common mistakes and misconceptions
Support and
homework
Extension
Higher
sets
Teacher
Guide
Higher
sets
Practice
Book
A-A*
Practice
Book
Section
36.1
Section
16.1
Section
36.2
Section
36.3
Section
16.1
Section
16.2
Forgetting that quadrants are numbered
anticlockwise.
Failing to take account of the given interval, and
assuming that it is always 0° to 360°.
Not sketching accurate diagrams.
Rounding too soon in more complex calculations.
GPW
36.2
GPW
36.3
A, A*
Section 36.4
Producing inaccurate sketches and working.
Rounding too soon in complex calculations.
Not recognising a question where the sine rule
should be used.
Section
36.4
Section
16.3
A, A*
Section 36.5
Producing inaccurate sketches and working.
Rounding prematurely in calculations.
Section
36.5
Section
16.4, 16.5
64
Longman AQA GCSE Maths Two-year Linear Scheme of Work – for Higher sets
angle
Solve more complex
trigonometric
problems
© Pearon Education Limited 2010
Not recognising a question where the cosine rule
should be used.
65
Download