22988 version 2 Page 1 of 3 Handle and store manufactured wood products for further processing Level 3 Credits 8 Purpose People credited with this unit standard are able to: demonstrate knowledge of the operation of mobile plant to handle and store manufactured wood products; move manufactured wood products around a wood manufacturing operation using mobile plant; and stack and de-stack packets of manufactured wood products. Subfield Wood Manufacturing - Generic Skills Domain Wood Manufacturing Foundation Skills Status Registered Status date 25 January 2008 Date version published 25 January 2008 Planned review date 31 December 2011 Entry information Open. Accreditation Evaluation of documentation and visit by NZQA and industry. Standard setting body (SSB) Competenz Accreditation and Moderation Action Plan (AMAP) reference 0173 This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Special notes 1 The following apply to the performance of all elements of this unit standard: a All work practices must meet recognised codes of practice, and documented worksite health and safety and environmental procedures (where these exceed the code) for personal, product, and worksite health and safety, and must meet the obligations required under current legislation, including the Resource Management Act 1991, Health and Safety in Employment Act 1992, and their subsequent amendments. b All work practices must meet documented worksite operating procedures. This includes the recording (by electronic or non-electronic means) of activities, events, and decisions. c All communications made in relation to this unit standard must be made in accordance with worksite procedures for content, recipient, timing, and method. New Zealand Qualifications Authority 2016 22988 version 2 Page 2 of 3 2 Definitions Mobile plant refers to forklifts with a minimum tare weight of 12 tonne and fitted with frame extensions, or side loaders moving over-length material (more than 50% longer than the machine) within a wood manufacturing operation. Manufactured wood products refer to solid wood, pulp and paper, wood panel, or engineered wood products. Worksite documentation refers to instructions to staff on policy and procedures (including the application of legislation to worksite situations) which are formally documented, and are available for reference at the worksite. Examples are standard operating procedures, specifications, manuals, and manufacturer's information. Elements and performance criteria Element 1 Demonstrate knowledge of the operation of mobile plant to handle and store manufactured wood products. Performance criteria 1.1 Hazards associated with the operation of mobile plant within the site environment are identified, and the role of protective equipment and safety features used to manage these are explained, in accordance with worksite documentation. Range 1.2 Environmental hazards are identified in accordance with the operation of mobile plant within the site environment. Range 1.3 hazards may include but are not limited to – pedestrians, other vehicles, dust, poor visibility, restricted space; safety features may include but are not limited to – use of vehicle warning systems, wearing appropriate safety equipment. terrain, drains, restricted space, fumes, fuel efficiency. Roles and responsibilities of the mobile plant operator are described in accordance with worksite documentation. Element 2 Move manufactured wood products around a wood manufacturing operation using mobile plant. Performance criteria 2.1 Product movement requirements are identified and plans made for their efficient implementation in accordance with worksite documentation. Range requirements may include but are not limited to – curing times, production plan time-frames, quarantine or hold requirements. New Zealand Qualifications Authority 2016 22988 version 2 Page 3 of 3 2.2 Movements are carried out without damage to wood products and equipment, and without injury to people. 2.3 Wood products are labelled or marked to meet worksite documentation. 2.4 Production continuity is maintained between accordance with worksite documentation. manufacturing stages in Element 3 Stack and de-stack packets of manufactured wood products. Performance criteria 3.1 Stacks are sited and formed to meet worksite documentation regarding space utilisation. 3.2 Packets of manufactured wood products are stacked to meet worksite documentation requirements for stack height, glut spacing, length, and stability. 3.3 Packets of manufactured wood products are de-stacked in a manner that leaves the rest of the stack in a safe and accessible condition. Please note Providers must be accredited by the Qualifications Authority, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be accredited by the Qualifications Authority before they can register credits from assessment against unit standards. Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards. Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact Competenz at info@competenz.org.nz if you wish to suggest changes to the content of this unit standard. New Zealand Qualifications Authority 2016