NZQA Expiring unit standard
8248 version 9
Page 1 of 5
Title
Operate woolskin fleshing machines
Level
3
Credits
30
Purpose
People credited with this unit standard are able to: interpret
company processing requirements; set up fleshing machinery
for operation; operate fleshing machinery and flesh woolskins;
describe the effects of incorrect woolskin fleshing machinery
operations; describe processing stages preceding and
following woolskin fleshing machinery operations; demonstrate
team-work; and comply with company and statutory health,
safety, and environment requirements.
Classification
Leather Manufacturing > Woolskin Manufacture
Available grade
Achieved
Explanatory notes
1
Legislation relevant to this unit standard includes but is not limited to – Health and
Safety in Employment Act 1992 and the Resource Management Act 1991.
2
Definitions
Company specifications are criteria set by the company related to materials,
processes and practices.
Company requirements refer to instructions to staff on policy, procedures and
practices related to activities in the workplace.
This unit standard is
Outcomes and evidence requirements
expiring
Outcome 1
Interpret company processing requirements.
Evidence requirements
1.1
Processing details are interpreted from company production information.
Range
1.2
details include but are not limited to – batch identification, pelt
type, number of pelts, processing instructions, comments, and
special requirements.
Production planning priorities are identified in accordance with company and
customer requirements.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
8248 version 9
Page 2 of 5
1.3
Departures from company specifications are checked and authorised in
accordance with company requirements.
1.4
The completion of lead-in production processes is checked against production
information and confirmed before processing commences.
Outcome 2
Set up fleshing machinery for operation.
Evidence requirements
2.1
Safety checks meet company specifications prior to machinery start-up.
2.2
Machines failing safety checks are reported in accordance with company
specifications.
2.3
Blade sharpness and roller settings meet company specifications for the pelt
type and quality required.
2.4
Fleshing machinery is set up in accordance with leather processing
requirements, production planning priorities, and company specifications.
2.5
Set-up permits pelts to be fleshed within company specified tolerances.
Outcome 3
Operate fleshing machinery and flesh woolskins.
Evidence requirements
3.1
3.2
This unit standard is
Pelts are inspected, assessed, presented, and fed into flesher in accordance
with company specifications.
expiring
Start-up, operation, monitoring, maintenance, shutdown, and cleaning of
fleshing machinery meet company specifications.
3.3
Feed-in of pelts is coordinated with co-workers in accordance with company
requirements.
3.4
Fleshing machinery blade sharpness, and fleshing tolerances are adjusted to
suit pelt quality requirements and production priorities.
3.5
Machine stoppages, blockages, and breakdowns are reported in accordance
with company specifications.
3.6
Pelt batches are processed in accordance with production priorities and
company quality and speed requirements.
3.7
Fleshed pelts meet company specified quality and tolerance specifications.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
8248 version 9
Page 3 of 5
3.8
Fleshed pelts are presented, stacked, and transferred to the next stage of
processing in accordance with company specifications.
3.9
Process control checks and documentation are completed in accordance with
company specifications.
Outcome 4
Describe the effects of incorrect woolskin fleshing machinery operations.
Evidence requirements
4.1
The effects of incorrect fleshing machinery operations are described in terms of
cost to a tannery.
Range
effects include but are not limited to – damage, requirements for
rework, customer dissatisfaction, financial loss.
Outcome 5
Describe processing stages proceeding and following woolskin fleshing machinery
operations.
Range
descriptions include but are not limited to – key processing steps, production
outcomes, quality outcomes, effects of non-conformance.
Evidence requirements
5.1
Production requirements of the preceding processing stages are described in
accordance with company specifications.
This unit standard is
Outcome 6
expiring
Demonstrate team-work.
5.2
Production requirements of the following processing stages are described in
accordance with company specifications.
Evidence requirements
6.1
The quality and completeness of tasks meet the operational requirements of
downstream co-workers.
6.2
Communication and feedback are provided to and requested from co-workers to
maintain and improve task and product quality.
6.3
Co-workers are not endangered through the operator's methods and
equipment.
6.4
Assistance is provided to co-workers within the confines of product flow and
operator availability.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
8248 version 9
Page 4 of 5
6.5
Machinery, equipment, and facility malfunctions, and product non-conformance
problems are identified and reported in accordance with company requirements.
6.6
Conflict resolution techniques are applied to minimise interpersonal differences
with co-workers that may adversely affect team performance.
Outcome 7
Comply with company and statutory health, safety, and environment requirements.
Evidence requirements
7.1
Company-supplied clothing, and hygiene and safety equipment and materials,
are worn and used in accordance with company and statutory requirements.
7.2
Work methods comply with company and statutory requirements to minimise
the risk of ill-health and injuries to the operator and others.
7.3
Unsafe and unhealthy conditions are identified and reported in accordance with
company and statutory requirements.
7.4
Cleanliness of equipment, operator, and work area complies with company
specifications.
7.5
Waste disposal meets company safety and environmental requirements.
Replacement information
This unit standard, unit standard 8016, unit standard
8236 and unit standard 21828 have been replaced by
unit standard 27904.
This unit standard is
expiring
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
8248 version 9
Page 5 of 5
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
28 August 1996
31 December 2015
Revision
2
23 March 1999
31 December 2015
Revision
3
20 February 2002
31 December 2015
Revision
4
16 January 2003
31 December 2015
Revision
5
14 October 2004
31 December 2015
Review
6
14 December 2007
31 December 2015
Review
7
21 February 2013
31 December 2015
Rollover
8
20 March 2015
31 December 2017
Rollover
9
17 September 2015
31 December 2018
Consent and Moderation Requirements (CMR) reference
0185
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
This unit standard is
expiring
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016