NZQA registered unit standard
5021 version 6
Page 1 of 3
Title
Produce detailed design drawings for industrial textile fabrication
products
Level
4
Credits
6
Purpose
This unit standard is for people who work in the industrial textile
fabrication industry. People credited with this unit standard are
able to: determine drawing requirements for products in the
industrial textile fabrication industry; perform calculations to
produce drawings; and produce product drawings under
supervision.
Classification
Industrial Textile Fabrication > Industrial Textile Fabrication
Core Skills
Available grade
Achieved
Explanatory notes
1
Legislation relevant to this unit standard includes but is not limited to the Health and
Safety in Employment Act 1992.
2
Definition
Company requirements refer to instructions to staff on policy and procedures which
are documented in memo or manual format and are available in the workplace.
These requirements include but are not limited to – company specifications and
procedures, work instructions, manufacturer specifications, product quality
specifications, and legislative requirements.
Outcomes and evidence requirements
Outcome 1
Determine drawing requirements for products in the industrial textile fabrication industry.
Evidence requirements
1.1
Drawing requirements are identified in accordance with customer and company
requirements.
1.2
Drawing media to meet job specifications are selected and used in accordance
with company requirements.
1.3
Drawing parameters to meet job specifications are identified in accordance with
company requirements.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
Range
5021 version 6
Page 2 of 3
projections, views, scales, layout.
Outcome 2
Perform calculations to produce drawings.
Evidence requirements
2.1
Calculations are undertaken to obtain construction measurements and are as
per job specifications.
Range
2.2
areas, circumferences, arcs, chords, fits, tolerances, mathematical
constants including pi, triangular calculations using Pythagoras’
theorem, triangular calculations using trigonometric functions.
Dimensions to meet job specifications are selected in accordance with company
requirements.
Outcome 3
Produce product drawings under supervision.
Evidence requirements
3.1
Tools and materials that enable the drawing to be carried out are selected and
used in accordance with company requirements.
3.2
Products and assemblies are drawn to job specifications.
3.3
Drawing is dimensioned and labelled to job specifications.
3.4
Drawings are produced to documented job specifications appropriate to
worksite.
3.5
Drawings meet product specifications and supervisor’s approval.
3.6
Safe working practices are carried out throughout the task in accordance with
legislative requirements.
Range
Planned review date
personal safety; safety of other people; workshop safety; tool,
equipment, and machine safety.
31 December 2019
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
5021 version 6
Page 3 of 3
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
18 July 1995
N/A
Revision
2
30 October 1997
N/A
Revision
3
28 May 1998
N/A
Review
4
17 August 1999
N/A
Review
5
26 March 2007
N/A
Rollover
6
27 January 2015
N/A
Consent and Moderation Requirements (CMR) reference
0014
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact the NZ Motor Industry Training Organisation (Incorporated) (MITO)
info@mito.org.nzinfo@mito.org.nz if you wish to suggest changes to the content of this
unit standard.
NZ Motor Industry Training Organisation
(Incorporated)
SSB Code 101542
 New Zealand Qualifications Authority 2016