NZQA registered unit standard 28033 version 1 Page 1 of 3 Title Identify and remove light corrosion from the surfaces of aircraft structure Level 3 Credits Purpose 4 This is an entry level skills unit standard for people entering the aeronautical engineering industry. People credited with this unit standard are able to: identify corrosion damage; remove light corrosion; and clean area and equipment. Classification Aeronautical Engineering > Aircraft Structures Available grade Achieved Explanatory notes 1 All tasks are to be carried out in accordance with enterprise procedures, the enterprise being the organisation carrying out the work. Enterprise procedures referred to in this unit standard are the applicable procedures found in the following: enterprise exposition; manufacturer publications; Government and local body legislation; airworthiness authority requirements. 2 This standard may be assessed against on or off job in a real or simulated aeronautical engineering environment. Outcomes and evidence requirements Outcome 1 Identify corrosion damage. Evidence requirements 1.1 Signs of corrosion are identified through visual inspection in accordance with enterprise procedures. Range 1.2 may include but are not limited to – surface deformed, paint blistered or flaked, powder, discolouration. The type of corrosion is identified in accordance with enterprise procedures. Range ServiceIQ SSB Code 9068 may include but is not limited to – uniform etch, pitting, intergranular, exfoliation, filiform, galvanic, fretting, dissimilar metal. New Zealand Qualifications Authority 2016 NZQA registered unit standard 1.3 28033 version 1 Page 2 of 3 The severity of corrosion damage is determined and reported in accordance with enterprise procedures. Outcome 2 Remove light corrosion. Evidence requirements 2.1 Corrosion removal method is selected in accordance with enterprise procedures. Range 2.2 may include but is not limited to – light mechanical, manual removal, chemical. Materials and tools used for corrosion removal are assembled in accordance with enterprise procedures. Range may include but are not limited to – personal protective equipment (PPE) applicable to task, micro grinder, sanders, plastic media blasting equipment, abrasive pads, abrasive papers, chemicals. 2.3 Surface is prepared and corrosion removed in accordance with enterprise procedures. 2.4 Chemical surface conversion is carried out in accordance with enterprise procedures. Outcome 3 Clean area and equipment. Evidence requirements 3.1 Surface is cleaned of all chemical residue and mechanical media in accordance with enterprise procedures. 3.2 Equipment is cleaned in accordance with enterprise procedures. 3.3 Equipment is checked for serviceability and unserviceable items are dealt with in accordance with enterprise procedures. 3.4 Waste material is removed and disposed of or stored in accordance with enterprise procedures. Range 3.5 may include but is not limited to – legislation, regulations and codes for the storage and disposal of hazardous and toxic materials, Material Safety Data Sheets (MSDS). Documentation is completed in accordance with enterprise procedures. ServiceIQ SSB Code 9068 New Zealand Qualifications Authority 2016 NZQA registered unit standard Planned review date 28033 version 1 Page 3 of 3 31 December 2018 Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 19 September 2013 N/A Consent and Moderation Requirements (CMR) reference 0028 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact the ServiceIQ qualifications@serviceiq.org.nz if you wish to suggest changes to the content of this unit standard. ServiceIQ SSB Code 9068 New Zealand Qualifications Authority 2016