NZQA registered unit standard 4092 version 5 Page 1 of 2

advertisement
NZQA registered unit standard
4092 version 5
Page 1 of 2
Title
Evaluate and interpret test indications found using radiographic
gamma ray NDT methods
Level
5
Credits
80
Purpose
People credited with this unit standard are able to: evaluate
and interpret test indications found using radiographic gamma
ray NDT (non destructive testing) methods and prepare written
NDT inspection reports; and direct testing personnel associated
with the evaluation of the inspection results.
Classification
Aeronautical Engineering > Aeronautical Non Destructive
Testing
Available grade
Achieved
Explanatory notes
All tasks are to be carried out in accordance with enterprise procedures, the enterprise being
the organisation carrying out the work. Enterprise procedures referred to in this unit standard
are the applicable procedures found in the following: enterprise exposition; manufacturer
publications; Government and local body legislation; airworthiness authority requirements.
Outcomes and evidence requirements
Outcome 1
Evaluate and interpret test indications found using radiographic gamma ray NDT and
prepare written NDT inspection reports.
Evidence requirements
1.1
Test indications are evaluated and interpreted in accordance with enterprise
procedures.
Range
confirmed, relevant, non-relevant, false.
1.2
Indications found during the evaluation are interpreted in accordance with
enterprise procedures.
1.3
Indistinct indications are confirmed using other NDT methods in accordance with
enterprise procedures.
1.4
Inspection report is completed in accordance with enterprise procedures.
ServiceIQ
SSB code 9068
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
1.5
4092 version 5
Page 2 of 2
Test results are certified in accordance with enterprise procedures.
Outcome 2
Direct testing personnel associated with the evaluation of the inspection results.
Evidence requirements
2.1
Personnel performing radiographic gamma ray NDT inspections are directed in
accordance with enterprise procedures.
Planned review date
31 December 2018
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
23 April 1996
31 December 2016
Revision
2
7 August 1997
31 December 2016
Revision
3
8 May 2001
31 December 2016
Review
4
20 June 2006
31 December 2016
Review
5
24 October 2014
N/A
Consent and Moderation Requirements (CMR) reference
0028
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact ServiceIQ qualifications@serviceiq.org.nz if you wish to suggest changes
to the content of this unit standard.
ServiceIQ
SSB code 9068
 New Zealand Qualifications Authority 2016
Download