NZQF NQ Ref
Version
1205
Page 1 of 4
2
National Certificate in Corrugated Case Converting (Rotary Die Cutter
Printer Operator) (Level 4)
Level
4
Credits
97
This qualification is expiring. The last date to meet the requirements is 31 December
2018.
Version 2 of this qualification has been republished to extend the last date of enrolment on
programmes from 31 December 2013 to 31 December 2016, also to extend the last date
for assessment from 31 December 2015 to 31 December 2018.
Transition Arrangements
This qualification has been replaced by the New Zealand Certificate in Fibreboard
Packaging (Level 4) [Ref: 1820].
The last date for entry into programmes leading to the replaced qualification is 31
December 2016.
For detailed information see Review Summaries on the NZQA website.
NZQF National Qualification Registration Information
Process
Registration
Republished
Revision
Republished
Version
1
1
2
2
Date
October 2005
November 2012
January 2014
November 2015
Last Date for Assessment
December 2018
December 2018
December 2018
December 2018
It is the intention of Competenz that no existing trainee should be disadvantaged by these
transition arrangements. Any person who considers they have been disadvantaged may
appeal to Competenz using the contact details below.
Standard Setting Body
Competenz
PO Box 9005
Newmarket
Auckland 1149
Telephone
Email
Competenz
SSB Code 101571
0800 5261800
qualifications@competenz.org.nz
 New Zealand Qualifications Authority 2016
NZQF NQ Ref
Version
1205
Page 2 of 4
2
National Certificate in Corrugated Case Converting (Rotary Die Cutter
Printer Operator) (Level 4)
Level
4
Credits
97
Purpose
The Corrugated Case Converting industry is highly specialised due to the high cost and
complexity of the equipment needed to convert corrugated board for packaging. Training
toward assessment against the workplace based unit standards contained in this
qualification is confined to those plants throughout New Zealand which have this specialist
equipment installed.
This qualification recognises the particular skills and knowledge required of trainees in the
processes of operating a rotary die cutter printer in the converting of corrugated board.
Holders of this qualification are able to produce three or more colour printed board, and
operate a printer rotary die cutter both for repeat work and for complex new work in the
corrugated packaging industry.
This qualification builds upon the skills and knowledge recognised in the National
Certificate in Corrugated Case Converting (Level 3) with strands in Flexo Folder Gluer,
Rotary Die Cutter Printer, Specialty Gluer, and Flat Bed Die Cutter [Ref: 1202].
Replacement Information
This qualification replaced the National Certificate in Corrugated and Solid Board
Converting (Rotary Die Cutting and Printing Operator) (Level 4) [Ref: 0509].
Special Notes
Prerequisite: National Certificate in Corrugated Case Converting (Level 3) with strands in
Flexo Folder Gluer, Rotary Die Cutter Printer, Specialty Gluer, and Flat Bed Die Cutter
[Ref: 1202], or demonstrate equivalent knowledge and skills.
Credit Range
Level 3 credits
Level 4 credits
Total
20
77
97
Requirements for Award of Qualification
This qualification will be awarded to people who have gained credit for the compulsory
standards.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQF NQ Ref
1205
Version
Page 3 of 4
2
Award of NZQF National Qualifications
Credit gained for a standard may be used only once to meet the requirements of this qualification.
Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the
purpose of award. The table of mutually exclusive standards is provided on the New Zealand Qualifications
Authority (NZQA) website: http://www.nzqa.govt.nz/qualifications-standards/standards/standards-exclusionlist/.
Reviewed standards that continue to recognise the same overall outcome are registered as new versions
and retain their identification number (ID). Any version of a standard with the same ID may be used to meet
qualification requirements that list the ID and/or that specify the past or current classification of the standard.
Detailed Qualification Requirements
Compulsory
All the standards listed below are required.
Field
Manufacturing
Subfield
Fibreboard Packaging
Domain
Corrugated Case Converting
Id
Title
10109 Produce three or more colour printed board in the corrugated
packaging industry
10126 Operate a rotary die cutter for complex new work in the
corrugated packaging industry
10127 Operate a printer rotary die cutter for repeat work in the
corrugated packaging industry
10128 Operate a printer rotary die cutter for complex new work in the
corrugated packaging industry
Subfield
Printing
Domain
Printing Production
Id
Title
20057 Demonstrate knowledge of business and quality principles for
printing
Level
4
Credit
25
3
10
4
40
4
12
Level
3
Credit
10
Transition Arrangements
Version 1 was republished in November 2012 to indicate that the qualification has been
reviewed and replaced by a New Zealand qualification.
Version 1 replaced the National Certificate in Corrugated and Solid Board Converting
(Rotary Die Cutting and Printing Operator) (Level 4) [Ref: 0509].
Changes to structure and content
 credit total has increased from 75 to 97
 credits have changed in unit standard 10109
 unit standards 10126 and 20057 were added.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016
NZQF NQ Ref
1205
Version
2
Page 4 of 4
Certification
This certificate will display the logos of NZQA, Competenz, and the organisation that has
been granted consent to assess against standards that meet the requirements of the
qualification (accredited).
Classification
This qualification is classified according to the classification system listed on the Directory
of Assessment Standards (DAS) and the New Zealand Standard Classification of
Education (NZSCED) system as specified below.
DAS Classification
Code
Description
1964
Manufacturing/Fibreboard
Packaging/Corrugated Case
Converting
NZSCED
Code
Description
030103 Engineering and Related
Technologies/Manufacturing,
Engineering and
Technology/Printing
Quality Management Systems
Providers and Industry Training Organisations must be granted consent to assess by a recognised Quality
Assurance Body before they can register credits from assessment against standards. Organisation with
consent to assess and Industry Training Organisations assessing against standards must engage with the
moderation system that applies to those standards. Consent to assess requirements and the moderation
system are outlined in the associated Consent and Moderation Requirements (CMR) for each standard.
Competenz
SSB Code 101571
 New Zealand Qualifications Authority 2016