NZQA Expiring unit standard 3094 version 8 Page 1 of 5 Title Assess wool yields prior to slaughter Level 4 Purpose Credits 120 People credited with this unit standard are able to: inspect sheep; estimate wool yield; complete wool records; comply with organisational and statutory animal welfare requirements; demonstrate team-work; and comply with organisational and statutory hygiene and safety requirements. This unit standard is for people with wool handling qualifications or experience. Classification Meat Processing > Slaughter and Dressing Available grade Achieved Entry information Critical health and safety prerequisites Open. Explanatory notes 1 2 This unit standard is Resource documents include but are not limited to – Meat Industry Standard 4 Procurement of Animals for Food, available from the New Zealand Food Safety expiring Authority (NZFSA) at Legislation relevant to this unit standard includes but is not limited to – Health and Safety in Employment Act 1992, Animal Welfare Act 1999. http://www.nzfsa.govt.nz/animalproducts/meat/meatman/index.htm. 3 Definitions Organisational requirements refer to instructions to staff on policy and procedures which are documented in memo, electronic or manual format and are available in the workplace; The operator refers to the candidate being assessed against this unit standard. Outcomes and evidence requirements Outcome 1 Inspect sheep. Primary Industry Training Organisation SSB Code 101558 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 3094 version 8 Page 2 of 5 Evidence requirements 1.1 Each line and pen of stock is inspected in a consistent pattern that meets organisational requirements. 1.2 Sheep breeds, types, sexes, ages and approximate carcass weights are identified in accordance with organisational requirements. 1.3 Wool coverage of each line is identified in accordance with organisational requirements. Range woolly, shorn, crutched, top-knotched, belly crutched. 1.4 Physical examination of each line is in accordance with organisational requirements. 1.5 Wool condition is examined and identified in accordance with organisational requirements. Range colour, length, yield, variations of type and length within line, contamination, abnormalities. 1.6 Skin contamination and abnormalities are identified in accordance with organisational requirements. 1.7 Double inspections, missed lines and inconsistent comparisons between lines are avoided. Outcome 2 Estimate wool yield. This unit standard is Examined animals are compared to remainder of stock in each line and the average wool yield per animal is estimated in accordance with organisational expiring requirements. Evidence requirements 2.1 2.2 Estimated wool yield is determined in kilograms in accordance with organisational requirements. 2.3 Estimated yields meet organisational tolerance specifications for accuracy. Outcome 3 Complete wool records. Evidence requirements 3.1 Wool assessment for each line of stock is recorded in accordance with organisational requirements. Primary Industry Training Organisation SSB Code 101558 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 3094 version 8 Page 3 of 5 3.2 Wool and skin abnormalities are recorded in accordance with organisational requirements. 3.3 Wool assessment records are completed, communicated and filed in accordance with organisational requirements. 3.4 Wool pull records for individual clients are maintained in accordance with organisational requirements. Outcome 4 Comply with organisational and statutory animal welfare requirements. Evidence requirements 4.1 Stock is moved and handled humanely with minimal force, speed and noise. 4.2 Stock is not subjected to cruelty, pain, injury, overcrowding or unnecessary stress through the operator's methods, dogs or equipment. 4.3 Techniques for catching, restraining and examining individual animals meet organisational and statutory requirements. 4.4 Pen cleanliness and stock water supplies meet organisational and statutory requirements. 4.5 Injured, unhealthy and weak animals are reported, handled and treated in accordance with organisational and statutory requirements. 4.6 Sources of potential injury or stress to animals are reported in accordance with organisational and statutory requirements. This unit standard is Demonstrate team-work. expiring Evidence requirements Outcome 5 5.1 Tasks are completed within the time and space allocation determined by product flow and organisational requirements. 5.2 The quality and completeness of tasks meet the operational requirements of following co-workers. 5.3 Communication and feedback are provided to and requested from co-workers to maintain and improve task and product quality. 5.4 Co-workers are not endangered through the operator's methods and equipment. 5.5 Co-worker assistance is provided within the confines of product flow and operator space. Primary Industry Training Organisation SSB Code 101558 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 3094 version 8 Page 4 of 5 5.6 Machinery, equipment, and facility malfunctions are identified and reported to supervisory staff in accordance with organisational requirements. 5.7 Conflict resolution techniques are applied to minimise interpersonal differences with co-workers which may adversely affect team performance. Outcome 6 Comply with organisational and statutory hygiene and safety requirements. Evidence requirements 6.1 Company supplied clothing, and hygiene and safety equipment are worn and used in accordance with organisational and statutory requirements. 6.2 Work methods comply with specified organisational and statutory requirements to minimise the risk of product contamination and injuries to the operator and others. 6.3 Unsafe and unhygienic conditions are identified and reported to supervisory staff in accordance with organisational requirements. 6.4 Equipment, operator and work area cleanliness complies with organisational and statutory requirements. This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below. Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration Revision Review This unit standard is2016 1 22 February 1995 31 December 2 29 September 1998 31 December 2016 expiring 3 30 August 1999 31 December 2016 Revision 4 19 July 2001 31 December 2016 Review 5 23 August 2005 31 December 2016 Review 6 19 June 2009 31 December 2016 Review 7 27 January 2015 31 December 2016 Rollover 8 17 September 2015 31 December 2018 Consent and Moderation Requirements (CMR) reference 0033 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Primary Industry Training Organisation SSB Code 101558 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 3094 version 8 Page 5 of 5 Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. This unit standard is expiring Primary Industry Training Organisation SSB Code 101558 New Zealand Qualifications Authority 2016