NZQA Expiring unit standard
20777 version 2
Page 1 of 4
Title
Describe and use traps to control avian pests
Level
3
Purpose
Credits
7
This unit standard is for people involved with pest control in
rural environments.
People credited with this unit standard are able to: demonstrate
knowledge of a cage trap used for control of avian pests;
prepare for trapping avian pests; set and maintain traps, and
place baits and lures for avian pest control; check and clear
traps of avian pests and non-target species, and process and
store or dispose of carcasses; and clean and store equipment
and materials, and maintain records.
Classification
Pest Management > Pest Control
Available grade
Achieved
Entry information
Recommended skills
and knowledge
Recommended: Unit 20787, Demonstrate knowledge of avian
biology and environmental impact as a pest species, or
demonstrate equivalent knowledge and skills.
Explanatory notes
1
Legislation relevant to this unit standard includes but is not limited to the – Resource
Management Act 1991, Health and Safety in Employment Act 1992, Wild Animal
Control Act 1977, Conservation Act 1987, National Parks Act 1980, Reserves Act
1977, Wildlife Act 1953, Animal Welfare Act 1999, Biosecurity Act 1993, and their
subsequent amendments.
2
Definitions
organisational procedures – the verbal and written instructions to staff on avian pest
trapping procedures;
avian pests – any feral or uncontrolled domestic, introduced or native (where a permit
has been issued), species impacting negatively on native plant or any animal
species, or social or economic values, which may include but is not limited to – rooks,
starlings, magpies, mynhas, or parrot species;
rural environments – any land outside urban environments.
Outcomes and evidence requirements
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
20777 version 2
Page 2 of 4
Outcome 1
Demonstrate knowledge of a cage trap used for control of avian pests.
Evidence requirements
1.1
The cage trap is described in terms of its mode of action when trapping avian
pests.
1.2
The cage trap is described in terms of baits and lures used when trapping avian
pests.
1.3
The cage trap is described in terms of the advantages and disadvantages of its
use.
1.4
The cage trap is described in terms of the situations best suited to its use.
Outcome 2
Prepare for trapping avian pests.
Evidence requirements
2.1
Location and boundaries for the placement of traps are identified consistent with
avian pest behaviour and organisational procedures.
2.2
Timing and duration of trapping operation are confirmed in accordance with
organisational procedures.
2.3
Personal and environmental risks associated with the trapping operation are
identified and minimised in accordance with relevant legislation and local
authority requirements, and are reported in accordance with organisational
procedures.
Range
2.4
risks include but are not limited to – death of non-target species,
injury to operator or other people.
Vehicles, equipment, and materials suitable for the trapping operation and avian
pests are prepared in accordance with organisational procedures.
Outcome 3
Set and maintain traps, and place baits and lures for avian pest control.
Evidence requirements
3.1
Trap selected is suitable for the avian pest, and the physical environment.
3.2
Site for placement of trap is selected to maximise chance of trapping avian
pests, and minimise chance of trapping non-target species.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
20777 version 2
Page 3 of 4
3.3
Trap is positioned, anchored, calibrated, and trap mechanism set in accordance
with manufacturer’s recommendations for avian pests, and the physical
environment.
3.4
Baits and lures are placed in accordance with organisational procedures.
3.5
Set traps are maintained in accordance with organisational procedures.
Outcome 4
Check and clear traps of avian pests and non-target species, and process and store or
dispose of carcasses.
Evidence requirements
4.1
Traps are checked in accordance with the Animal Welfare Act 1999, and
organisational procedures.
4.2
Trapped avian pests are released from the trap and destroyed humanely in
accordance with the Animal Welfare Act 1999, and organisational procedures.
4.3
Trapped non-target species are processed in accordance with the Animal
Welfare Act 1999, and organisational procedures.
4.4
Trapped avian pests and non-target species are handled without injury to self or
other people.
4.5
Avian pest carcasses are processed and stored, or disposed of, in accordance
with the Animal Welfare Act 1999, and organisational procedures.
Outcome 5
Clean and store equipment and materials, and maintain records.
Evidence requirements
5.1
Equipment and materials used in the trapping operation are cleaned and stored
in accordance with organisational procedures.
5.2
Avian pests and non-target animals which have been trapped, killed and/or
released are recorded in accordance with organisational procedures.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Replacement information
Primary Industry Training Organisation
SSB Code 101558
This unit standard was replaced by unit standard 29338.
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
20777 version 2
Page 4 of 4
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
26 July 2004
31 December 2018
Review
2
17 March 2016
31 December 2018
Consent and Moderation Requirements (CMR) reference
0052
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016