NZQA registered unit standard 2536 version 9 Page 1 of 3

advertisement
NZQA registered unit standard
2536 version 9
Page 1 of 3
Title
Manufacture glulam components
Level
3
Purpose
Credits
5
This entry-level unit standard is for people working in a joinery
workshop.
People credited with this unit standard are able to prepare and
manufacture glulam components.
Classification
Joinery > Joinery Core Skills
Available grade
Achieved
Explanatory notes
1
All workplace practices must comply with current legislation, codes of practice, and
documented site safety procedures for personal, product, and worksite safety.
2
Legislation and regulations relevant to this unit standard include but are not limited to
– Health and Safety in Employment Act 1992, Health and Safety in Employment
Regulations 1995.
Outcomes and evidence requirements
Outcome 1
Prepare glulam components.
Evidence requirements
1.1
The glulam components are identified from the working drawings.
1.2
On-site measurements are confirmed in accordance with workplace practice.
1.3
The quantity of material and adhesives needed are calculated and an order is
placed in accordance with workplace practice.
Outcome 2
Manufacture glulam components.
Evidence requirements
2.1
Timber is selected for the glulam process in accordance with workplace practice
and job requirements.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
2536 version 9
Page 2 of 3
timber selection includes but is not limited to – grain direction,
laminate thickness, suitable and unsuitable defects.
Range
2.2
The timber is machined to the requirements of the specifications in accordance
with workplace practice.
2.3
A cramping system is set up to form the glulam components to the required
shape in accordance with workplace practice.
2.4
Adhesive is applied and the components are assembled and cramped in
accordance with workplace practice.
2.5
Components are finished and protected to the requirements of the
specifications in accordance with workplace practice.
Planned review date
31 December 2018
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
16 August 1995
31 December 2013
Review
2
16 August 1995
31 December 2013
Review
3
16 August 1995
31 December 2013
Revision
4
21 October 1997
31 December 2013
Revision
5
20 December 1999
31 December 2013
Revision
6
16 June 2005
31 December 2013
Review
7
23 January 2009
31 December 2015
Review
8
24 October 2014
31 December 2018
Rollover
9
17 September 2015
31 December 2018
Consent and Moderation Requirements (CMR) reference
0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
2536 version 9
Page 3 of 3
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Building and Construction Industry Training Organisation
[email protected] if you wish to suggest changes to the content of this unit standard.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
Download