NZQA registered unit standard 2495 version 9 Page 1 of 3

advertisement
NZQA registered unit standard
Title
Identify bobby calf cuts
Level
2
Purpose
2495 version 9
Page 1 of 3
Credits
3
This pre-entry unit standard is for people who are interested in
being employed in a meat processing plant.
People credited with this unit standard are able to identify
bobby calf cuts.
Classification
Meat Processing > Meat Processing - Core Skills
Available grade
Achieved
Explanatory notes
1
Legislation relevant to this unit standard includes but is not limited to – Health and
Safety in Employment Act 1992, Animal Products Act 1999.
2
Resource documents include but are not limited to – The New Zealand Meat
Specifications Guide, available from the Beef and Lamb New Zealand website at
http://www.beeflambnz.com.
3
Definitions
Organisational requirements – instructions to staff on policies and procedures that
are documented in memo, electronic or manual format and available in the
workplace.
Company specifications – product specifications set by the company relating to cuts,
weights, presentation, and packaging.
Customer specifications – product specifications set by clients relating to cuts,
weights, presentation, and packaging.
Outcomes and evidence requirements
Outcome 1
Identify bobby calf cuts.
Range
bobby calf cuts include but are not limited to
– boneless leg – slashed boned, boneless leg
– tunnel boned, bone in leg, bone in saddle, boneless saddle, backstrap,
shortloin
– bone in, shortloin
– bone out, fillets, tenderloin, boneless shoulder
– slashed boned, boneless shoulder
– tunnel boned.
Primary Industry Training Organisation
Code 101558
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
2495 version 9
Page 2 of 3
Evidence requirements
1.1
Bobby calf cuts are identified and named using The New Zealand Meat
Specifications Guide terminology.
1.2
The quality aspects of bobby calf cuts are identified in accordance with
company and customer specifications.
1.3
The location on a bobby calf carcass from which each cut is derived is
identified.
1.4
The quantity of cuts per carton is identified in accordance with company and
customer specifications.
1.5
The disposition of unsuitable cuts is identified in accordance with organisational
requirements.
Planned review date
31 December 2019
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
31 January 1995
31 December 2012
Revision
2
29 September 1998
31 December 2012
Review
3
30 August 1999
31 December 2012
Revision
4
19 July 2001
31 December 2012
Review
5
24 November 2003
31 December 2012
Review
6
21 October 2004
31 December 2012
Review
7
20 February 2009
31 December 2012
Review
8
21 July 2011
31 December 2016
Review
9
27 January 2015
N/A
Consent and Moderation Requirements (CMR) reference
0033
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Primary Industry Training Organisation
Code 101558
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
2495 version 9
Page 3 of 3
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Primary Industry Training Organisation standards@primaryito.ac.nz if
you wish to suggest changes to the content of this unit standard.
Primary Industry Training Organisation
Code 101558
 New Zealand Qualifications Authority 2016
Download