NZQA registered unit standard 27281 version 1 Page 1 of 5 Title Analyse surface material and construction requirements and apply to developed kitchen or bathroom designs Level 5 Purpose Credits 10 This unit standard is for experienced people working in the area of kitchen or bathroom design and planning. People credited with this unit standard are able to analyse: flooring material requirements; surface material requirements; wall surface material requirements; and cabinet construction and hardware requirements, to develop kitchen or bathroom designs; and apply surface material and hardware requirements to developed kitchen or bathroom designs. Classification Design > Kitchen and Bathroom Design Available grade Achieved Explanatory notes 1 References Selecting Flooring (Wellington: BRANZ, 2000); Selecting Timber (Wellington: BRANZ, 2004); available at http://www.branz.co.nz. AS/NZS 4386.2:1996 Domestic kitchen assemblies – Installation; available at http://www.standards.co.nz. Compliance document for New Zealand Building Code, Clause G1, Personal Hygiene, available at http://www.dbh.govt.nz. 2 Definitions Worksite requirements – refer to instructions to staff on policy and procedures which are documented in memo or manual format and are available in the workplace. These requirements include but are not limited to – company specifications and procedures, work instructions, manufacturer’s specifications, product quality specifications, legislative requirements. Client – refers to the person who has commissioned the design brief. Kitchen or bathroom design brief – refers to the design parameters agreed between the kitchen or bathroom designer and the client. 3 Evidence is required of a minimum of two different kitchen or bathroom designs. Building and Construction Industry Training Organisation SSB Code 101562 New Zealand Qualifications Authority 2016 NZQA registered unit standard 27281 version 1 Page 2 of 5 Outcomes and evidence requirements Outcome 1 Analyse flooring material requirements to develop kitchen or bathroom designs. Evidence requirements 1.1 Flooring materials used in the kitchen or bathroom are analysed in terms of their function, sustainability, client requirements, and any legislative requirements. Range requirements may include but are not limited to – hardwearing, long lasting, water resistant, easy to clean, sound transfer. 1.2 Flooring material finishes are analysed in terms of their impact on the kitchen or bathroom design. 1.3 Flooring materials options are incorporated into the kitchen or bathroom design in accordance with the kitchen or bathroom design brief. Range flooring materials may include but are not limited to – timber, cork, natural stone, terracotta, ceramic tiles, concrete, linoleum, vinyl. Outcome 2 Analyse surface material requirements to develop kitchen or bathroom designs. Range surface materials may include but are not limited to – benchtops, cabinets. Evidence requirements 2.1 Surface materials used in the kitchen or bathroom are analysed in terms of their function, sustainability, client requirements, and any legislative requirements. Range requirements include but are not limited to – heat resistant, stain resistant, easy to clean, non-porous, shock absorbent; surface materials may include but are not limited to – low pressure laminates, high pressure laminates, lacquer, glass overlays, paint finish, stainless steel, solid timber, veneer. 2.2 Surface material finishes are analysed in terms of their impact on the kitchen or bathroom design. 2.3 Surface material options are incorporated into the kitchen or bathroom design in accordance with the kitchen or bathroom design brief. Range surface material options may include but are not limited to – timber, stainless steel, natural stone, engineered stone, laminate, acrylics, glass, low pressure laminates, high pressure laminates, lacquer, glass overlays, paint finish, stainless steel, solid timber, veneer. Building and Construction Industry Training Organisation SSB Code 101562 New Zealand Qualifications Authority 2016 NZQA registered unit standard 27281 version 1 Page 3 of 5 Outcome 3 Analyse wall surface material requirements to develop kitchen or bathroom designs. Evidence requirements 3.1 Wall surface materials used in the kitchen or bathroom are analysed in terms of their function, sustainability, client requirements, and any legislative requirements. Range wall surface materials may include but are not limited to – laminates, glass, tiles, stainless steel, paint, srubbable wallpaper, timber panelling, engineered stone, natural stone. 3.2 Wall surface finishes are analysed in terms of their impact on the kitchen or bathroom design. 3.3 Wall surface material options are incorporated into the kitchen or bathroom design in accordance with the kitchen or bathroom design brief. Range wall surface materials may include but are not limited to – laminates, glass, tiles, stainless steel, paint, scrubbable wallpaper, timber panelling, engineered stone, natural stone. Outcome 4 Analyse cabinet construction and hardware requirements to develop kitchen or bathroom designs. Evidence requirements 4.1 Types of cabinet construction used in the kitchen or bathroom are analysed in terms of their function, sustainability, client requirements, and any legislative requirements. Range 4.2 Cabinet hardware requirements are analysed in terms of their impact on the kitchen or bathroom design. Range 4.3 cabinets may include but are not limited to – modular, custom built, overlay, face frame system. cabinet hardware includes but is not limited to – hinges, drawer runners, handles, interior mechanical fittings. Cabinet finishes are analysed in terms of their impact on the kitchen or bathroom design. Building and Construction Industry Training Organisation SSB Code 101562 New Zealand Qualifications Authority 2016 NZQA registered unit standard 4.4 27281 version 1 Page 4 of 5 Cabinet material, construction and hardware options are incorporated into the kitchen or bathroom design in accordance with the kitchen or bathroom design brief. materials may include but are not limited to – medium density fibreboard, moisture resistant board, low pressure laminates. Range Outcome 5 Apply surface material and hardware requirements to developed kitchen or bathroom designs. Evidence requirements 5.1 Surface material and hardware requirements are incorporated into the developed kitchen or bathroom design in accordance with worksite requirements and the kitchen or bathroom design brief. 5.2 Client approval for the surface material and hardware requirements and the developed design is sought in accordance with worksite requirements. Replacement information Planned review date This unit standard replaced unit standard 24687. 31 December 2016 Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 20 May 2011 N/A Consent and Moderation Requirements (CMR) reference 0073 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Building and Construction Industry Training Organisation SSB Code 101562 New Zealand Qualifications Authority 2016 NZQA registered unit standard 27281 version 1 Page 5 of 5 Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMRs). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact the Building and Construction Industry Training Organisation info@bcito.org.nz if you wish to suggest changes to the content of this unit standard. Building and Construction Industry Training Organisation SSB Code 101562 New Zealand Qualifications Authority 2016