NZQA registered unit standard 4027 version 5 Page 1 of 3

advertisement
NZQA registered unit standard
4027 version 5
Page 1 of 3
Title
Repair aeronautical component parts by flame spraying
Level
4
Credits
15
Purpose
People credited with this unit standard are able to: prepare to
flame spray aeronautical components; set up flame spraying
equipment; flame spray components; prepare components for
use; and carry out task completion activities.
Classification
Aeronautical Engineering > Aeronautical Machining
Available grade
Achieved
Explanatory notes
All tasks are to be carried out in accordance with enterprise procedures, the enterprise being
the organisation carrying out the work. Enterprise procedures referred to in this unit standard
are the applicable procedures found in the following: enterprise exposition; manufacturer
publications; Government and local body legislation; airworthiness authority requirements.
Outcomes and evidence requirements
Outcome 1
Prepare to flame spray aeronautical components.
Evidence requirements
1.1
Component identity is confirmed with documentation by comparing serial and
part numbers.
1.2
Task is established and documented in accordance with enterprise procedures.
1.3
Work area is prepared and resources obtained in accordance with enterprise
procedures.
Range
publications, materials, tooling, equipment, safety equipment,
environmental conditions.
Outcome 2
Set up flame spraying equipment.
Evidence requirements
2.1
Equipment is prepared in accordance with enterprise procedures.
ServiceIQ
SSB code 9068
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
Range
4027 version 5
Page 2 of 3
condition checked, set up, adjusted, made safe to use.
2.2
Equipment is maintained in accordance with enterprise procedures.
2.3
Sequence of operations is planned and verified in accordance with enterprise
procedures.
Outcome 3
Flame spray components.
Evidence requirements
3.1
Component is flame sprayed in accordance with enterprise procedures.
3.2
Component is measured and checked for conformity with specifications.
Range
dimensional accuracy, profile, surface finish.
3.3
Defects are reported, recorded, and rectified in accordance with enterprise
procedures.
3.4
Unserviceable parts and materials are disposed of in accordance with
enterprise procedures.
Range
identification labelling, destruction and dispatch.
Outcome 4
Prepare components for use.
Evidence requirements
4.1
Components are prepared for use, storage, or transit in accordance with
enterprise procedures.
Range
4.2
surface protection, packing.
Documentation is completed in accordance with enterprise procedures.
Outcome 5
Carry out task completion activities.
Evidence requirements
5.1
Completion activities specific to the task and work area are carried out in
accordance with enterprise procedures.
Range
ServiceIQ
SSB code 9068
activities may include but are not limited to – tool control,
cleanliness, tidiness, return of publications, preparation for next
activity, return of aircraft and systems to normal.
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
5.2
4027 version 5
Page 3 of 3
Leftover items, parts, and materials are disposed of in accordance with
enterprise procedures.
may include but is not limited to – serviceable, unserviceable,
surplus, waste, scrap, hazardous.
Range
Planned review date
31 December 2018
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
19 June 1995
31 December 2016
Revision
2
7 August 1997
31 December 2016
Revision
3
8 May 2001
31 December 2016
Review
4
26 March 2007
31 December 2016
Review
5
24 October 2014
N/A
Consent and Moderation Requirements (CMR) reference
0028
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact ServiceIQ qualifications@serviceiq.org.nz if you wish to suggest changes
to the content of this unit standard.
ServiceIQ
SSB code 9068
 New Zealand Qualifications Authority 2016
Download