NZQA registered unit standard
21004 version 2
Page 1 of 3
Title
Make up orders for materials used to manufacture prefabricated
frames and trusses
Level
3
Credits
3
Purpose
People credited with this unit standard are able to: identify
order requirements, and make up orders, for materials used to
manufacture prefabricated frames and trusses.
Classification
Construction Trades > Carpentry
Available grade
Achieved
Explanatory notes
1
Definitions
Shop drawings refers to the set of drawings associated with a building project to be
made in a controlled environment, and can include plans, elevations, sections, details
or any other drawings that give information about the project.
Workplace practice refers to the documented procedures specific to a workplace
which set out the standard and required practices of that workplace.
2
Credit for this unit standard indicates compliance with industry practice. Industry
practice refers to the ability to demonstrate knowledge and skills that reflect the
productivity, uniformity, finish quality, and material economies currently accepted
within industry.
3
Legislation and publications relevant to this unit standard include:
Heath and Safety in Employment Act 1992 and Health and Safety in Employment
Regulations 1995;
Building Act 2004;
New Zealand Building Code.
Outcomes and evidence requirements
Outcome 1
Identify order requirements for materials used in the manufacture of prefabricated frames
and trusses.
Evidence requirements
1.1
Order requirements are identified from interpretation of shop drawings, and
order details are checked and verified in accordance with workplace practice.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
components – type, grade, treatment, length, quantity, gauge,
dimensions, condition;
hardware – type, size, quantity;
appearance, timeframe, any other items required by the shop
drawings.
Range
1.2
21004 version 2
Page 2 of 3
Order details are matched with availability of materials and action is taken in
accordance with workplace practice.
Outcome 2
Make up orders for materials used to manufacture of prefabricated frames and trusses.
Evidence requirements
2.1
Materials are obtained from stock in accordance with order requirements and
workplace practice.
2.2
Orders are completed within agreed time-frames and in accordance with
production sequence and workplace practice.
2.3
Documentation is completed in accordance with workplace practice.
Planned review date
31 December 2015
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
22 September 2004
31 December 2012
Review
2
9 December 2010
N/A
Accreditation and Moderation Action Plan (AMAP) reference
0048
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, or
an inter-institutional body with delegated authority for quality assurance, before they can
report credits from assessment against unit standards or deliver courses of study leading
to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
21004 version 2
Page 3 of 3
Consent requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Building and Construction Industry Training Organisation
national.office@bcito.org.nz if you wish to suggest changes to the content of this unit
standard.
Building and Construction Industry Training
Organisation
SSB Code 101562
 New Zealand Qualifications Authority 2016