13059 version 3
Page 1 of 3
Install mechanical fixings and building hardware on site
Level
3
Credits
4
Purpose
People credited with this unit standard are able to: install mechanical fixings
on site; install building hardware on site; and complete work operations on
site.
Subfield
Construction Trades
Domain
Carpentry
Status
Registered
Status date
25 January 2008
Date version published
25 January 2008
Planned review date
31 December 2012
Entry information
Open.
Replacement information
This unit standard and unit standard 13023 replaced unit
standard 624.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Building and Construction Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0048
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
Definitions
Plant is used as in the Health and Safety in Employment Act 1992 to mean
appliances, equipment, fittings, furniture, implements, machines, machinery, tools,
vehicles, plus parts, controls, and anything connected.
Site documents refer to any official documentation for the site, and may include
consents, working drawings, plans and specifications, reports, producer statements,
any relevant industry standards, or any other documentation critical to the
construction process.
Work site practice refers to the documented procedures specific to a work site which
set out the standard and required practices of that work site.
 New Zealand Qualifications Authority 2016
13059 version 3
Page 2 of 3
2
For all on site unit standards the practical assessment evidence must be provided in
the context of commercial business construction operations, in the workplace, under
normal workplace conditions.
3
Credit for this unit standard indicates compliance with industry practice. Industry
practice refers to the ability to demonstrate knowledge and skills that reflect the
productivity, uniformity, finish quality and material economies currently accepted
within industry.
4
Legislation relevant to this unit standard includes: Health and Safety in Employment
Act 1992 and Health and Safety in Employment Regulations 1995;
Building Act 2004;
Resource Management Act 1991;
New Zealand Building Code.
Elements and performance criteria
Element 1
Install mechanical fixings on site.
Performance criteria
1.1
Mechanical fixings are selected and installed in accordance with site documents
and manufacturer’s instructions.
Range
nails, screws, bolts;
three of – nail plates, nail on plates, joint brackets, hangers,
framing anchors, metal fittings.
Element 2
Install building hardware on site.
Range
latches and locks;
three of – door hinges, single swing door closers, window hinges, stays,
catches, bathroom hardware, door pivot systems, egress door hardware,
security door and window hardware, fire door and window hardware, door
stops, disability hardware.
Performance criteria
2.1
Building hardware is selected and installed in accordance with site documents
and manufacturer’s instructions.
 New Zealand Qualifications Authority 2016
13059 version 3
Page 3 of 3
Element 3
Complete work operations on site.
Performance criteria
3.1
All operations are safely completed; workplace, tools, plant and equipment are
cleaned; and tools, plant and equipment are stored in accordance with work site
practice.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Building and Construction Industry Training Organisation
national.office@bcito.org.nz if you wish to suggest changes to the content of this unit
standard.
 New Zealand Qualifications Authority 2016