13052 version 3
Page 1 of 3
Attend to construction subcontractors on site
Level
3
Credits
4
Purpose
People credited with this unit standard are able to attend to construction
subcontractors on site, and complete work operations on site.
Subfield
Construction Trades
Domain
Carpentry
Status
Registered
Status date
25 January 2008
Date version published
25 January 2008
Planned review date
31 December 2012
Entry information
Open.
Replacement information
This unit standard and unit standard 13015 replaced unit
standard 616.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Building and Construction Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0048
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
Definitions
Plant is used as in the Health and Safety in Employment Act 1992 to mean
appliances, equipment, fittings, furniture, implements, machines, machinery, tools,
vehicles, plus parts, controls, and anything connected.
Site documents refer to any official documentation for the site, and may include
consents, working drawings, plans and specifications, reports, producer statements,
any relevant industry standards, or any other documentation critical to the
construction process.
Work site practice refers to the documented procedures specific to a work site which
set out the standard and required practices of that work site.
 New Zealand Qualifications Authority 2016
13052 version 3
Page 2 of 3
2
For all on site unit standards the practical assessment evidence must be provided in
the context of commercial business construction operations, in the workplace, under
normal workplace conditions.
3
Credit for this unit standard indicates compliance with industry practice. Industry
practice refers to the ability to demonstrate knowledge and skills that reflect the
productivity, uniformity, finish quality and material economies currently accepted
within industry.
4
Legislation relevant to this unit standard includes: Health and Safety in Employment
Act 1992 and Health and Safety in Employment Regulations 1995;
Building Act 2004;
Resource Management Act 1991;
New Zealand Building Code.
Elements and performance criteria
Element 1
Attend to subcontractors on site.
Range
eight of – excavator, brick and block layer, reinforcing steel fixer, roofer,
structural steel fabricator, mechanical services contractor, plumber, drain layer,
joiner, glazier, window installer, electrician, interior plasterer, interior decorator,
painter, solid plasterer, specialist coatings applicator, tiler, scaffolder, concrete
placer, floor sander, insulation installer, metal worker, floor covering contractor,
suspended ceilings contractor, proprietary partitions contractor, lift installer, fire
protection contractor, data technician, concrete cutter.
Performance criteria
1.1
Extent of work of subcontractors is identified as detailed in site documents.
1.2
Framing and cutting is completed to the requirements of the subcontractor and
site documents.
1.3
Building is ‘made good’ after work of the subcontractor is completed.
1.4
Temporary protection for work already completed is provided in accordance with
site documents.
Element 2
Complete work operations on site.
Performance criteria
2.1
All operations are safely completed; workplace, tools, plant and equipment are
cleaned; and tools, plant and equipment are stored in accordance with work site
practice.
 New Zealand Qualifications Authority 2016
13052 version 3
Page 3 of 3
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Building and Construction Industry Training Organisation
national.office@bcito.org.nz if you wish to suggest changes to the content of this unit
standard.
 New Zealand Qualifications Authority 2016