Fabricate and place reinforcing steel and steel mesh on site

advertisement
13046 version 3
Page 1 of 3
Fabricate and place reinforcing steel and steel mesh on site
Level
3
Credits
5
Purpose
People credited with this unit standard are able to: fabricate reinforcing steel
for footings, foundations, walls and floors on site; place reinforcing steel and
steel mesh on site; and complete work operations on site.
Subfield
Construction Trades
Domain
Carpentry
Status
Registered
Status date
25 January 2008
Date version published
25 January 2008
Planned review date
31 December 2012
Entry information
Open.
Replacement information
This unit standard and unit standard 13009 replaced unit
standard 610.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Building and Construction Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0048
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
Definitions
Plant is used as in the Health and Safety in Employment Act 1992 to mean
appliances, equipment, fittings, furniture, implements, machines, machinery, tools,
vehicles, plus parts, controls, and anything connected.
Site documents refer to any official documentation for the site, and may include
consents, working drawings, plans and specifications, reports, producer statements,
any relevant industry standards, or any other documentation critical to the
construction process.
Work site practice refers to the documented procedures specific to a work site which
set out the standard and required practices of that work site.
 New Zealand Qualifications Authority 2016
13046 version 3
Page 2 of 3
2
For all on site unit standards the practical assessment evidence must be provided in
the context of commercial business construction operations, in the workplace, under
normal workplace conditions.
3
Credit for this unit standard indicates compliance with industry practice. Industry
practice refers to the ability to demonstrate knowledge and skills that reflect the
productivity, uniformity, finish quality and material economies currently accepted
within industry.
4
Legislation relevant to this unit standard includes: Health and Safety in Employment
Act 1992 and Health and Safety in Employment Regulations 1995;
Building Act 2004;
Resource Management Act 1991;
New Zealand Building Code.
Elements and performance criteria
Element 1
Fabricate reinforcing steel for footings, foundations, walls and floors on site.
Range
bars, mesh, stirrups, links.
Performance criteria
1.1
Type of reinforcing steel is selected in accordance with site documents.
1.2
The reinforcing steel is cut and bent, and completed as detailed in site
documents.
1.3
Reinforcing steel is fabricated as detailed in site documents.
Element 2
Place reinforcing steel and steel mesh on site.
Range
floor slabs;
two of – footings, foundations, ground beams, walls, masonry.
Performance criteria
2.1
Delivery of reinforcing steel and steel mesh is accepted on site and stored
without damage or deterioration.
2.2
Reinforcing steel and steel mesh is placed and tied in position in accordance
with site documents.
2.3
Reinforcing steel and steel mesh is fixed in place to prevent displacement
during construction and placement of concrete.
 New Zealand Qualifications Authority 2016
13046 version 3
Page 3 of 3
Element 3
Complete work operations on site.
Performance criteria
3.1
All operations are safely completed; workplace, tools, plant and equipment are
cleaned; and tools, plant and equipment are stored in accordance with work site
practice.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Building and Construction Industry Training Organisation
national.office@bcito.org.nz if you wish to suggest changes to the content of this unit
standard.
 New Zealand Qualifications Authority 2016
Download