ENGR 8 Part I. Drills -- 1 point each Assignment 4 Chapter 4.1-4 Due: next wed Part II. Assisted Problem Solving -- 2 points each Plan: 1) The key to this is to realize F must point along the line connecting A to B 2) Therefore, find the angle of Rba (this could be done quite easily using info from the drawing) PLAN: 1) We are given a moment and asked to determine b and c for block 2) Set up position vector Rpa using the information from the drawing (use a=3,b and c) 3) Set up and compute the cross product using unknowns b and c. 4) The result for 3 should be set equal to the given Mp. Use this to solve for b and c Part III. Unassisted Problem Solving -- 3 points each