Setting up the SPA922 initially
Document ID: 109114
Contents
IntroductionHow do I setup the SPA922?Related Information
Introduction
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business
products (formerly Linksys Business Series).
Q. How do I setup the SPA922?
A.
Step 1:
Connect the WAN port of the SPA922 to your network (router, switch or hub). Make sure
that you have a DHCP server so that the SPA922 will get the IP address.
Click here to register the SPA922 to a VoIP provider.
Related Information
• Technical Support &Documentation − Cisco Systems
Updated: Dec 12, 2008
Document ID: 109114