DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes THREE (3) T6 G12 Metal Halide
lamps.
Catalog #
Type
Project
Comments
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes a
beveled “knife-edge” lips to ensure a
clean edge. Can accommodate various
ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts
are mounted in a separate metal
enclosure box attached to the junction
box with 18" (457mm) of flexible
conduit. Ballast enclosure includes a
separated wiring compartment and
two knockouts for conduit entry and
features a perforated metal door for
easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and ballast enclosure) is removable from
the housing for easy maintenance.
E.... Lamps
Three (3) T6 G12 Metal Halide lamps with
reflectors mounted in adjustable double
gimbal. Lamp holder is individually
removable and may be regressed
1" (25mm) for additional cut-off. 45° x 45°
locking lamp adjustment. Lamp ring
features beveled edge and lockable
accessory ring that can accept one
optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
G12 sockets.
Next Generation
Recessed
Multi-Lamp Fixture
F.... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws through the meshplate.
Three (3) Light
T6 G12 Metal Halide
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Remodel Housing
Trimless
Ceiling Cut-Out: 7.94" x 21.16"
(202mm x 538mm)
22.86"
11.31"
Double
Gimbal
COMBOLIGHT®
581mm
287mm
9.95"
45º x 45º
Adjust
253mm
1.70"
43mm
13.01"
26.39"
9.45"
331mm
240mm
20.89"
Required
above
ceiling
20.06"
670mm
531mm
509mm
6.69"
12.33"
170mm
313mm
6.69"
Integral Electronic
Metal Halide Ballasts
*Media Holder:
White - LNF-MH-W
Black - LNF-MH-B
Silver - LNF-MH-S
T6 G12 Lamp with Reflectors
This fixture utilizes T6 Metal Halide lamp and includes highperformance clear aluminum reflectors in narrow, medium,
or wide distributions. Non-standard color reflectors are
available upon request.
9.25"
170mm
235mm
Separate Wiring
Compartment
Perforated Meshplate
18" (457mm) flexible conduit
Thermal
Protector
ORDERING INFORMATION
C3
Configuration
C3 = COMBOLIGHT
Recessed Three (3) Light
R
E
Lamp Type / Wattage Label / Reflector Type
039T6N = 39 Watt T6 G12 Metal Halide / Narrow
039T6M = 39 Watt T6 G12 Metal Halide / Medium
039T6W = 39 Watt T6 G12 Metal Halide / Wide
070T6N = 70 Watt T6 G12 Metal Halide / Narrow
070T6M = 70 Watt T6 G12 Metal Halide / Medium
070T6W = 70 Watt T6 G12 Metal Halide / Wide
Housing
R = Remodel
www.cooperlighting.com
N
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Finish
N = Trimless
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 06/12/2013