Catalog # Type Project Comments

advertisement
DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable
for downlighting and accent applications. Utilizes THREE (3) CDM-TM Metal
Halide (Philips® Mini Master Color) lamps.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes a
beveled “knife-edge” lips to ensure a
clean edge. Can accommodate various
ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts
are mounted in a separate metal
enclosure box attached to the junction
box with 18" (457mm) of flexible
conduit. Ballast enclosure includes a
separated wiring compartment and
two knockouts for conduit entry and
features a perforated metal door for
easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and ballast enclosure) is removable from
the housing for easy maintenance.
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
PGJ5 sockets.
E.... Lamps
Three (3) CDM-TM Metal Halide
lamps with reflectors mounted in
adjustable double gimbal. Lamp holder
is individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
F.... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with screws.
Three (3) Light
CDM-TM Metal Halide
Remodel Housing
Trimless
Ceiling Cut-Out: 5.90" x 15.03"
(150mm x 382mm)
Double
Gimbal
9.27"
16.73"
7.45"
236mm
425mm
189mm
7.95"
45º x 45º
Adjust
Required
above
ceiling
202mm
1.60"
41mm
23.39"
10.96"
594mm
278mm
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
13.94"
375mm
354mm
12.33"
4.65"
313mm
118mm
Integral Electronic Metal
Halide Ballasts
9.25"
235mm
CDM-TM Lamp with Reflectors
This fixture utilizes the Philips® Mini Master Color Lamp
and includes high-performance clear aluminum reflectors in
narrow, medium, or wide distributions. Non-standard color
reflectors are available upon request.
14.76"
4.65"
118mm
Separate Wiring
Compartment
Thermal
Protector
18" (457mm) flexible conduit
ORDERING INFORMATION
C3
Configuration
C3 = COMBOLIGHT
Recessed Three (3) Light
R
E
Lamp Type / Wattage Label / Reflector Type
020MMN = 20 Watt CDM-TM Mini Master Color Narrow
020MMM = 20 Watt CDM-TM Mini Master Color Medium
020MMW = 20 Watt CDM-TM Mini Master Color Wide
039MMN = 39 Watt CDM-TM Mini Master Color Narrow
039MMM = 39 Watt CDM-TM Mini Master Color Medium
039MMW = 39 Watt CDM-TM Mini Master Color Wide
Housing
R = Remodel
www.cooperlighting.com
N
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
N = Trimless
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 05/13/2013
Download