DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FOUR (4) PAR20 Metal Halide
lamps.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate various
ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts
are mounted in a separate metal
enclosure box attached to the junction
box with 18" (457mm) of flexible
conduit. Ballast enclosure includes a
separated wiring compartment and
two knockouts for conduit entry and
features a perforated metal door for
easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and ballast enclosure) is removable from
the housing for easy maintenance.
E.... Lamps
Four (4) PAR20 Metal Halide lamps
mounted in adjustable double gimbal.
Lamp holders are removable and Lamp
holder is individually removable and may
be regressed 1" (25mm) for additional
cut-off. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
Med. base sockets.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
F.... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
Four (4) Light
PAR20 Metal Halide
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Remodel Housing
Trimless
Ceiling Cut-Out: 5.90" x 19.67"
(150mm x 500mm)
Double
Gimbal
9.27"
21.38"
7.45"
236mm
543mm
189mm
Required
above
ceiling
45º x 45º
Adjust
7.95"
202mm
1.60"
41mm
29.08"
10.96"
739mm
278mm
19.41"
493mm
18.58"
16.44"
472mm
418mm
4.65"
118mm
Integral Electronic Metal
Halide Ballasts
9.25"
4.65"
118mm
235mm
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
Separate Wiring Compartment
Thermal
Protector
18" (457mm) flexible conduit
For use with 20W or 39W PAR20MH lamps.
ORDERING INFORMATION
C4
Configuration
C4 = COMBOLIGHT
Recessed Four (4) Light
R
E
Lamp Type / Wattage Label
020M20 = 20 Watt PAR20 Metal Halide
039M20 = 39 Watt PAR20 Metal Halide
Housing
R = Remodel
www.cooperlighting.com
N
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Insert
N = Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/07/2013