DESCRIPTION An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes FOUR (4) PAR38 120V lamps. Catalog # Type Project For remodel applications. Insulation must be kept 3" (76mm) from all sides and Comments at least 1" (25mm) above the housing. Date Prepared by SPECIFICATION FEATURES A.... Housing Housing and junction box are aluminum, trimless meshplate is steel with powder coated finish. Perforated meshplate allows for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled “knife-edge” lips to ensure a clean edge. Can accommodate various ceiling thickness. B.... System Protection: Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation. C.... Junction Box Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’. D.... Electrical Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Electrical components on individually removable “trays” for easy maintenance. E.... Lamps Four (4) PAR38 120V lamps mounted in adjustable double gimbal. Lamp holder is individually removable and may be regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment. Lamp ring features beveled edge and lockable accessory ring that can accept one optical accessory. Additional media holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming.Includes Med. base sockets. Double Gimbal F.... Mounting A mounting frame is provided which inserts into the ceiling opening. The housing is then pushed through the mounting frame and secured with screws through the meshplate. COMBOLIGHT® Next Generation Recessed Multi-Lamp Fixture G.... Labels cULus listed for non-type IC applications, suitable for use in damp locations. Four (4) Light PAR38 120V Ceiling Cut-Out: 7.94" x 27.84" (202mm x 707mm) Remodel Housing Trimless 11.31" 29.55" 287mm 751mm 9.95" 45º x 45º Adjust 253mm Wiring Compartment 13.01" 331mm 33.08" 9.45" 240mm 27.58" Required above ceiling 701mm 840mm 26.75" 680mm 6.69" 170mm 6.69" 170mm *Media Holder: White - LNF-MH-W Black - LNF-MH-B Silver - LNF-MH-S Perforated Meshplate Thermal Protector For use with PAR38 120V lamps 100W max. ORDERING INFORMATION C4 Configuration C4 = COMBOLIGHT Recessed Four (4) Light R N Lamp Type / Wattage Label 100P38 = 100 Watt max. PAR38 120V Housing R = Remodel www.cooperlighting.com 1 Primary Voltage 1 = 120V Power Supply N = None - Line Voltage Lamp N N Lamp Mechanism G = Double Gimbal R = Retractable Double Gimbal Trim Insert N = Trimless Specifications and Dimensions subject to change without notice. RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031 Trim Insert Finish N = Trimless Housing Interior/Electrical Door/Sleeve Finish W = White B = Black S = Industrial Silver rev 06/05/2013