DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes TWO (2) PAR38 120V lamps.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
Comments
at least 1" (25mm) above the housing.
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes a
beveled “knife-edge” lips to ensure a
clean edge. Can accommodate various
ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side
wall of the housing behind removable
access doors. Electrical components on
individually removable “trays” for easy
maintenance.
E.... Lamps
Two (2) PAR38 120V lamps mounted in
adjustable double gimbal. Lamp holder
is individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
Med. base sockets.
Double
Gimbal
F.... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws through the meshplate.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Two (2) Light
PAR38 120V
Ceiling Cut-Out: 7.94" x 14.47"
(202mm x 368mm)
Remodel Housing
Trimless
16.17"
11.31"
411mm
287mm
9.95"
253mm
45º x 45º
Adjust
Wiring
Compartment
19.70"
9.45"
13.01"
240mm
331mm
Required
above
ceiling
14.20"
500mm
361mm
13.38"
6.69"
340mm
170mm
6.69"
170mm
*Media Holder:
White - LNF-MH-W
Black - LNF-MH-B
Silver - LNF-MH-S
Perforated
Meshplate
Thermal
Protector
For use with PAR38 120V lamps 100W max.
ORDERING INFORMATION
C2
Configuration
C2 = COMBOLIGHT
Recessed Two (2) Light
R
N
Lamp Type / Wattage Label
100P38 = 100 Watt max. PAR38 120V
Housing
R = Remodel
www.cooperlighting.com
1
Primary Voltage
1 = 120V
Power Supply
N = None - Line Voltage Lamp
N
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Insert Finish
N = Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 06/05/2013