DESCRIPTION An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes FOUR (4) PAR38 120V lamps in a 2x2 square configuration. Catalog # Type Project For remodel applications. Insulation must be kept 3" (76mm) from all sides and at least 1" (25mm) above the housing. Comments Date Prepared by SPECIFICATION FEATURES A.... Housing Housing and junction box are aluminum, trimless meshplate is steel with powder coated finish. Perforated meshplate allows for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled “knife-edge” lips to ensure a clean edge. Can accommodate various ceiling thickness. B.... System Protection: Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation. C.... Junction Box Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’. D.... Electrical Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Electrical components on individually removable “trays” for easy maintenance. E.... Lamps Four (4) PAR38 120V lamps mounted in adjustable double gimbal. Lamp holder is individually removable and may be regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment. Lamp ring features beveled edge and lockable accessory ring that can accept one optical accessory. Additional media holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. base sockets. F.... Mounting Mounting clips are provided which mount the housing edge flush with the finished ceiling line. Mounting clips are secured to the housing through the meshplate with screws. COMBOLIGHT® Next Generation Recessed Multi-Lamp Fixture G.... Labels cULus listed for non-type IC applications, suitable for use in damp locations. Four (4) Light Square PAR38 120V Ceiling Cut-Out: 14.47" x 14.47" (368mm x 368mm) Remodel Housing Trimless 14.20" 18.00" 361mm 457mm Double Gimbal 9.95" Wiring Compartment 253mm Thermal Protector 19.70" 19.70" 9.45" 500mm 500mm 240mm Required above ceiling 45º x 45º Adjust 361mm 13.38" 340mm 14.20" 6.69" 170mm 13.38" 340mm 6.69" 170mm *Media Holder: White - LNF-MH-W Black - LNF-MH-B Silver - LNF-MH-S For use with PAR38 120V lamps 100W max. ORDERING INFORMATION CX Configuration CX = COMBOLIGHT Recessed Four (4) Light Square R N Lamp Type / Wattage Label 100P38 = 100 Watt max. PAR38 120V Housing R = Remodel www.cooperlighting.com 1 Primary Voltage 1 = 120V Power Supply N = None - Line Voltage Lamp N N Lamp Mechanism G = Double Gimbal R = Retractable Double Gimbal Trim Insert N = Trimless Specifications and Dimensions subject to change without notice. RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031 Trim Insert Finish N = Trimless Housing Interior/Electrical Door/Sleeve Finish W = White B = Black S = Industrial Silver rev 06/05/2013