DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes SIX (6) MR16 Metal
Halide lamps.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder
coated finish. Fixture utilizes a removable
trim sleeve to provide a 0.75" (19mm)
flange around the ceiling opening and to
help conceal the inner hardware of the
fixture from sight below the ceiling. Can
accommodate various ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts
are mounted in a separate metal
enclosure box attached to the junction
box with 18" (457mm) of flexible
conduit. Ballast enclosure includes a
separated wiring compartment and
two knockouts for conduit entry and
features a perforated metal door for
easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and ballast enclosure) is removable from
the housing for easy maintenance.
E.... Lamps
Six (6) MR16 Metal Halide lamps
mounted in adjustable double gimbal.
Lamp holder is individually removable and
may be regressed 1" (25mm) for additional
cut-off. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
GX10 TAL sockets.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
F.... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with screws.
Six (6) Light
MR16 Metal Halide
Remodel Housing
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
w/ 0.75" (19mm) Trim Flange
Ceiling Cut-Out: 5.13" x 24.34"
(130mm x 618mm)
Double
Gimbal
8.50"
26.05"
216mm
662mm
45º x 45º
Adjust
6.25"
159mm
1.60"
41mm
5.38"
*Media Holder:
White - LNB-MH-W
Black - LNB-MH-B
Silver - LNB-MH-S
24.75"
5.75"
137mm
629mm
24.08"
146mm
Required
above
ceiling
20.15"
512mm
Integral Electronic Metal
Halide Ballasts
23.25"
612mm
591mm
3.88"
99mm
3.88"
6.50"
99mm
165mm
Separate Wiring Compartment
Thermal
Protector
18" (457mm) flexible conduit
For use with GE 20W or 39W CMH MR16
ORDERING INFORMATION
C6
Configuration
C6 = COMBOLIGHT
Recessed Six (6) Light
R
E
Lamp Type / Wattage Label
020C16 = 20 Watt MR16 Metal Halide
039C16 = 39 Watt MR16 Metal Halide
Housing
R = Remodel
www.cooperlighting.com
T
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
White
Black
Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/09/2013