DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes FOUR (4) MR16
Metal Halide lamps in a 2x2 square configuration.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder
coated finish. Fixture utilizes a removable
trim sleeve to provide a 0.75" (19mm)
flange around the ceiling opening and to
help conceal the inner hardware of the
fixture from sight below the ceiling. Can
accommodate various ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts
are mounted in a separate metal
enclosure box attached to the junction
box with 18" (457mm) of flexible
conduit. Ballast enclosure includes a
separated wiring compartment and
two knockouts for conduit entry and
features a perforated metal door for
easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and ballast enclosure) is removable from
the housing for easy maintenance.
lockable accessory ring that can accept
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
GX10 TAL sockets.
E.... Lamps
Four (4) MR16 Metal Halide lamps
mounted in adjustable double gimbal.
Lamp holder is individually removable and
may be regressed 1" (25mm) for additional
cut-off. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
F.... Mounting
Mounting clips are provided which
mount the housing edge flush with the
finished ceiling line. Mounting clips are
secured to the housing with screws.
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Four (4) Light Square
MR16 Metal Halide
Remodel Housing
w/ 0.75" (19mm) Trim Flange
Ceiling Cut-Out: 8.84" x 8.84"
(225mm x 225mm)
12.54"
8.58"
319mm
218mm
6.25"
159mm
Thermal
Protector
1.60"
41mm
Double
Gimbal
9.25"
5.75"
235mm
146mm
9.25"
235mm
Required
above
ceiling
6.88"
7.75"
197mm
45º x 45º
Adjust
3.88"
99mm
6.88"
7.75"
175mm
175mm
197mm
3.88"
Integral Electronic Metal
Halide Ballasts
99mm
6.50"
6.50"
165mm
165mm
Separate Wiring
Compartment
*Media Holder:
White - LNB-MH-W
Black - LNB-MH-B
Silver - LNB-MH-S
18" (457mm) flexible conduit
24" (610mm) flexible conduit
For use with GE 20W or 39W CMH MR16
ORDERING INFORMATION
CX
Configuration
CX = COMBOLIGHT
Recessed Four (4) Light
Square
R
E
Lamp Type / Wattage Label
020C16 = 20 Watt MR16 Metal Halide
039C16 = 39 Watt MR16 Metal Halide
Housing
R = Remodel
www.cooperlighting.com
T
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/09/2013