DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes THREE (3) MR16
Metal Halide lamps.
For new construction applications. Insulation must be kept 3" (76mm) from all
sides and at least 1" (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a
0.75" (19mm) flange around the ceiling
opening and to help conceal the inner
hardware of the fixture from sight
below the ceiling. Can accommodate
0.50" (13mm) to 1.25" (32mm) ceiling
thickness. Optional Chicago Plenum
configuration available.
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be
configured for remote power.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
E.... Lamps
Three (3) MR16 Metal Halide lamps
mounted in adjustable double gimbals.
Lamp holder is individually removable and
may be regressed 1" (25mm) for additional
cut-off. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
C.... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
GX10 TAL sockets.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
F.... Mounting
Butterfly Brackets accept 1/2" (13mm)
EMT, C Channel, Tbar fasteners, and
bar hangers. Four tabs on housing for
securing to structure.
Three (3) Light
MR16 Metal Halide
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
New Construction
Housing
Ceiling Cut-Out: 4.67" x 12.42"
(119mm x 316mm)
13.19"
w/ 0.75" (19mm) Trim Flange
22.08"
335mm
561mm
5.75"
146mm
5.38"
13.13"
137mm
17.95"
Double
Gimbal
11.63"
334mm
456mm
295mm
3.88"
99mm
45º x 45º
Adjust
3.88"
99mm
*Media Holder:
White - LNB-MH-W
Black - LNB-MH-B
Silver - LNB-MH-S
Integral Electronic
Metal Halide Ballasts
Thermal
Protector
For use with GE 20W or 39W CMH MR16
ORDERING INFORMATION
C3
Configuration
C3 = COMBOLIGHT
Recessed Three (3) Light
E
Lamp Type / Wattage Label
020C16 = 20 Watt MR16 Metal Halide
039C16 = 39 Watt MR16 Metal Halide
Housing
N = New Construction
C = Chicago Plenum
www.cooperlighting.com
T
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/09/2013