DESCRIPTION
Catalog #
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FOUR (4) CDM-TM Metal Halide Project
(Philips® Mini Master Color) lamps.
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Type
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes a
beveled “knife-edge” lips to ensure a
clean edge. Can accommodate various
ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts
are mounted in a separate metal
enclosure box attached to the junction
box with 18" (457mm) of flexible
conduit. Ballast enclosure includes a
separated wiring compartment and
two knockouts for conduit entry and
features a perforated metal door for
easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and ballast enclosure) is removable from
the housing for easy maintenance.
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming.Includes
PGJ5 sockets.
E.... Lamps
Four (4) CDM-TM Metal Halide lamps
with reflectors mounted in adjustable
double gimbal. Lamp holder is
individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Next Generation
Recessed
Multi-Lamp Fixture
F.... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with screws.
Four (4) Light
CDM-TM Metal Halide
Remodel Housing
Trimless
Ceiling Cut-Out: 5.90" x 19.67"
(150mm x 500mm)
Double
Gimbal
7.45"
9.27"
21.38"
189mm
236mm
543mm
Required
above
ceiling
45º x 45º
Adjust
COMBOLIGHT®
7.95"
202mm
1.60"
41mm
10.96"
29.08"
278mm
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
739mm
18.58"
16.44"
19.41"
493mm
472mm
4.65"
418mm
118mm
Integral Electronic Metal
Halide Ballasts
9.25"
235mm
4.65"
118mm
Separate Wiring Compartment
CDM-TM Lamp with Reflectors
This fixture utilizes the Philips® Mini Master Color Lamp
and includes high-performance clear aluminum reflectors in
narrow, medium, or wide distributions. Non-standard color
reflectors are available upon request.
Thermal
Protector
18" (457mm) flexible conduit
ORDERING INFORMATION
C4
Configuration
C4 = COMBOLIGHT
Recessed Four (4) Light
R
E
Lamp Type / Wattage Label / Reflector Type
020MMN = 20 Watt CDM-TM Mini Master Color Narrow
020MMM = 20 Watt CDM-TM Mini Master Color Medium
020MMW = 20 Watt CDM-TM Mini Master Color Wide
039MMN = 39 Watt CDM-TM Mini Master Color Narrow
039MMM = 39 Watt CDM-TM Mini Master Color Medium
039MMW = 39 Watt CDM-TM Mini Master Color Wide
Housing
R = Remodel
www.cooperlighting.com
N
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
N = Trimless
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 05/13/2013