Concrete Inserts
Fig. 109AF - Concrete Insert - Hanger Application (B-Line B2501)
Size Range: 3/8"-16 thru 7/8"-9 rod
Material: Steel
Function: Designed to be embedded in concrete to provide a point
of support.
Approvals: Underwriters Laboratories Listed in the USA (UL) and
Canada (cUL) for 3/8" and 1/2".
Finish: Electro-Galvanized anchor bolt with Electro-Galvanized
hardware and plate.
Order By: Figure number, rod size and finish.
Concrete Inserts
Note: The hex or jam nut has NO value in determining the loads.
Their function is to assist in locking the coupling snug to the bottom of
the deck form preventing the concrete from leaking into the coupling
threads. Any other suitable locking device may be substituted if
desired.
Applications Per NFPA 13 (2010): UL Listed as a component of a
hanger assembly per Section 9.1.1.4.1 See dimensions and installation
Detail below.
Anchor Bolt
ASTM A307
E
Rod Coupling
Edge of Concrete
Mounting Hole for
Securing to Form
DE Min.
Design Load-Vertical
Rod
Size
Part No.
Max.
Pipe Size (IPS)
in.
109AF-3/8
3/8"-16
109AF-1/2
1/2"-13
109AF-5/8
5/8"-11
(mm)
Embedment
Depth E
in.
(mm)
(100)
31/2” (88.9)
8
(200)
31/2” (88.9)
12
(300)
4” (101.6)
4
DE
Min.
in.
(mm)
Approx.
Wt./100
Lbs.
(kg)
2” (50.8)
38.1
(17.3)
2” (50.8)
54.7
(24.8)
2” (50.8)
82.2
(37.3)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
76
Fire Protection Solutions
Concrete Inserts
Fig. 109AF - Concrete Insert - Brace Application (B-Line B2501)
Size Range: 3/8"-16 thru 7/8"-9 rod
Material: Steel
Function: Designed to be embedded in concrete to provide a point
of support.
Finish: Electro-Galvanized anchor bolt with Electro-Galvanized
hardware and plate.
Note: The hex or jam nut has NO value in determining the loads.
Their function is to assist in locking the coupling snug to the bottom of
the deck form preventing the concrete from leaking into the coupling
threads. Any other suitable locking device may be substituted if
desired.
Anchor Bolt
ASTM A307
Qualifies as an acceptable alternate seismic brace fastener per Section
9.3.5.9.6 Certification calculations for this application are available
upon request. See dimensions and installation Detail below.
E
Rod Coupling
Edge of Concrete
Mounting Hole for
Securing to Form
Design Load
45°
DE Min.
Rod
Size
Part No.
109AF-3/8
109AF-1/2
109AF-1/2
109AF-5/8
109AF-5/8
109AF-3/4
109AF-3/4
109AF-7/8
109AF-7/8
3/8"-16
1/2"-13
1/2"-13
5/8"-11
5/8"-11
3/4"-10
3/4"-10
7/8"-9
7/8"-9
Max. Horizontal Seismic
Load With Brace At 45°
Embedment
Depth E
DE
Min.
Approx.
Wt./100
in.
(mm)
in.
(mm)
in.
(mm)
Lbs.
(kg)
925
925
950
1250
1424
1275
1424
1330
1424
(4.11)
31/2”
31/2”
4”
4”
5”
4”
6”
4”
7”
(88.9)
2”
2”
2”
2”
2”
2”
2”
2”
2”
(50.8)
38.1
54.7
54.7
82.2
82.2
113.8
113.8
130.6
130.6
(17.3)
(4.11)
(4.22)
(5.56)
(6.33)
(5.67)
(6.33)
(5.91)
(6.33)
(88.9)
(101.6)
(101.6)
(127.0)
(101.6)
(152.4)
(101.6)
(177.8)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(24.8)
(24.8)
(37.3)
(37.3)
(51.6)
(51.6)
(59.2)
(59.2)
Seismic bracing design load calculated in compliance with the requirements of IBC 2009 / CBC 2010.
Rod
Size
Part No.
109AF-3/8
109AF-1/2
109AF-1/2
109AF-5/8
109AF-5/8
109AF-3/4
109AF-3/4
109AF-7/8
109AF-7/8
3/8"-16
1/2"-13
1/2"-13
5/8"-11
5/8"-11
3/4"-10
3/4"-10
7/8"-9
7/8"-9
Max. Horizontal Seismic
Load With Brace At 45°
Embedment
Depth E
DE
Min.
Approx.
Wt./100
in.
(mm)
in.
(mm)
in.
(mm)
Lbs.
(kg)
781
781
807
999
1275
1029
1424
1074
1424
(3.47)
31/2”
31/2”
4”
4”
5”
4”
6”
4”
7”
(88.9)
2”
2”
2”
2”
2”
2”
2”
2”
2”
(50.8)
38.1
54.7
54.7
82.2
82.2
113.8
113.8
130.6
130.6
(17.3)
(3.47)
(3.59)
(4.44)
(5.67)
(4.57)
(6.33)
(4.78)
(6.33)
(88.9)
(101.6)
(101.6)
(127.0)
(101.6)
(152.4)
(101.6)
(177.8)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(24.8)
(24.8)
(37.3)
(37.3)
(51.6)
(51.6)
(59.2)
(59.2)
Seismic bracing design load calculated in compliance with the requirements of IBC 2012 / CBC 2013.
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Fire Protection Solutions
77
Revised 8/8/2014
Concrete Inserts
Order By: Figure number, rod size and finish.