CATALOG#:
TYPE:

A specification grade residential platform for use
kept 3" away from side and top of units. A com-
with remote transformers that accepts low voltage
plete fixture requires two components;
MR16 lamps. The platform is Air tight to prevent
a PN3MR REMOTE platform, and a 3" Iris optical
energy loss, room drafts, dust marks on ceilings,
element. Elements may be changed after
and reduce sound transmission. Insulation must be
installation to provide a variety of distributions.











4 3/8"
[112mm]
Ceiling Cutout
           

  
      
 ...F r ame
transformer (by others). Transformer may feed
Hot dipped galvanized 20 Gauge steel frame with
multiple platforms.
integral 1/2" plaster lip. Plaster lip has centerline
 ...Gas ket s
notches for consistent alignment of units. Lip
Closed cell gaskets provide Air tight installation
allows quick installation in drywall or wet
without caulking of aperture. Unit is Air tight
plaster ceilings.
3"
LOW
 ...J unc ti on
22 Gauge steel housing allows for heat
REMOTE
PLATFORM
Box
18 cubic inches, listed for 4#12 AWG or 6#14
dissipation. Housing interior is matte black to
AWG 90° C additional feed through conductors,
provide a visually dark interior. Platforms are
has five 1/2 inch pryouts.
shipped with overspray protector installed in
 ...Bar
aperture.
Hangers are captive and feature set screws to
Removable lamp adjustment mechanism provides up
5"
[127mm]
Hangers
®
No Flex bar hangers shipped with platform.
 . . .A d j u s t a b i l i t y
4 3/8"
11 7/8" [112mm]
[302mm]
8 5/8"
[220mm]
provide positive horizontal locking. Bars span up to
to 45° tilt and 361° rotation and locks into any
22.5" for 24"o.c. spacings of wood, engineered
aiming position. Translating center beam optics
wood and steel frame joists. Nailess barb and loca-
maximize light output. Mechanism features hot
tor lip provide consistent installation height. For
aiming capability, indicator marks to ensure consis-
installation in T-bar ceilings order accessory
tant aiming for multiple units and tooless locking
MBCLP.
for both rotation and elevation. Unit is relamped
without unlocking adjustments. Elements are keyed
 ...Cod es
for proper insertion.
Thermally protected, IP labeled.Unit is airtight and
Adjustment mechanism can
NON-IC
VOLTAGE
TRANSFORMER
without Element installed.
 ...H ousi ng
   
be removed through the aperture for maintenance
exchanges less than 2.0 CFM with the plenum at a
from below.
pressure of 75 pascals.
Insulation must be kept
three inches away from fixture sides and none on
 ...Le ns
Soft focus lens standard for smooth beam
top as to entrap heat.
patterns. Up to two filter media can be used
 ...La bel s
which are retained in position during relamping.
UL and cUL listed, standard damp label, wet listed
with specific elements, IBEW union made.
 ...So cke t
GX5.3 base for Bi-pin MR16 lamps. Back light
Installation instructions included with every unit.
shield keeps interior of fixture dark.
 . . .R e m o t e
Transformer
Unit to be fed from 12V remote mounted

         
Platform
Sepa rate
Accessories
 
PN3MR REMOTE = 3" Airtight Non-IC
Housing for
Remote
Transformer
MBCLP = Push On T Bar Clips (For 10 Units)
MRSKT= Replacement MR16 Socket, With Lamp
Shield And Keyed Quick Connect
PLE3 = Plaster Lip Extension For Max 2" Thick
Ceiling
FMC3 = Flush Mount Collar
          
For additional options please consult factory.
ADI042567