PORTFOLIO TM
D ES C R IPTION
Low brightness 4-1/2-inch aperture lensed reflector for use with 18W
and 26W compact fluorescent lamps for below ceiling installation. The
deeply regressed lens provides superb shielding to eliminate brightness
at higher angles. Choice of lenses for various aesthetics. Standard
features include low iridescent finish on all reflector colors (to eliminate
"rainbowing") and venting to ensure maximum lamp life and lumen
output. The modular housing will also accept various downlight and wall
wash reflectors.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Re f l e c t o r
Soc ke t Conne ctor
S ock et
.050 thick aluminum, in a one piece
spun macrofocal parabolic contour,
available in a variety of Alzak®
finishes. Also available with white
or black baffle. Positive reflector
mounting pulls trim tight.
One piece vented and finned die
cast aluminum cap for maximum
thermal performance.
4-pin 18W GX24q2 or 26W GX24q3
base with fatigue free stainless
steel lamp spring ensures positive
lamp retention.
Hous i ng Cons t ru ction
Galvanized steel plaster ring
accommodates up to 1" ceiling
thickness.
Le n s
Choice of tempered fresnel,
prismatic, diffuse, or clear glass
lenses or molded prismatic acrylic,
opal diffuser or clear UV stabilized
acrylic. Lens is fixed to lower
reflector.
Electron ic B allast
Die cast screw tight connectors.
Electronic ballast provides full
light output and rated lamp life.
Provides flicker free and noise free
operation and starting. End of lamp
life protection is standard.
Rota ry L oc k So ck et
Labels
18W Lamps: GX24q2; 26/32W
Lamps: GX24q3. Fatigue-free
stainless steel lamp spring ensures
positive lamp
retention.
cULus listed, standard wet label.
Condui t F i tti ngs
Trim Ring Options
Self flanged or molded white trim
ring.
C4RV or C4IV
4080/4081
18W, 26W TTT
Compact Fluorescent
STEPREPEAT>
4-Inch Remodel/International
Vertical Lensed Downlight
ENERGY DATA
8-5/8"
[218mm]
8-5/8"
[218mm]
(2) 18W TTT 4-pin
Ballast: Electronic
120V Input Watts: 29
Line Amps: 0.25
277V Input Watts: 26
Line Amps: 0.09
Power Factor: >0.99
THD: <90%
Min. Starting Temperature: -10°C (15°F)
Adjustable
Sound Rating: Class A Standards
26W TTT 4-pin
Ballast: Electronic
4-1/2" [116mm]
5-1/8" [130mm]
5-3/4" [146mm]
4-1/2" [116mm]
5-1/8" [130mm]
5-3/4" [146mm]
REMODEL
INTERNATIONAL
120V Input Watts: 29
Line Amps: 0.25
277V Input Watts: 26
Line Amps: 0.09
Power Factor: >0.99
THD: <90%
Min. Starting Temperature: -10°C (15°F)
Sound Rating: Class A Standards
NOTES: Accessories should be ordered separately. For additional
options, please consult your Cooper Lighting Representative.
Alzak is a registered trademark of Aluminum Company of
America.
10"
[254mm]
11-3/8" [290mm]
10"
[254mm]
Adjustable
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADP110869
2014-07-24 11:52:00
OR D ER IN G INFOR M A TION
C4RV or C4IV 4080/4081
EXAMPLE: C4RV018ECP 4081LI WF=4" CFL Vertical Remodel Lensed Downlight, 18 Watt Triple Tube 120/277 Volt, Chicago Plenum, Self Flanged with Specular Clear Finish
Housing
Wa tt a g e
C4RV0=4" CFL
Vertical Remodel
C4RIV0=4" CFL
Vertical International
18=18W TTT
26=26W TTT
Ballast
Options
E=120/277V 50/60
Hz Electronic
3E=347V 50/60 Hz Electronic
D5LT=120-277V Fifth
Light (DALI Dimming)
3D5LT=347V Fifth Light
(DALI Dimming) (26W only)
D=120-277V Dimming
Lutron EcoSystem/3-Wire
Control (Factory Wired for
3-Wire)
DMARKVII=18W or 26W
120-277V Advance MARK 7
1DMARKX=18W or 26W
120V Advance MARK 10
2DMARKX=18W or 26W
277V Advance MARK 10
R e fl e c t o r
EM=Emergency
Module with
Remote
Test Switch
4081=Downlight
Lensed Reflector,
Self Flanged
4080=Downlight
Lensed Reflector,
Polymer Trim Ring
Finish
LI=Specular Clear
H=Semi-Specular
Clear
WMH=Warm Haze
G=Specular Gold
WH=Wheat
WHH=Wheat Haze
GP=Graphite
GPH=Graphite Haze
B=Specular Black
W=Gloss White
BB=Black Baffle
(4080 only)
WB=White Baffle
(4080 only)
Lens
1=Prismatic Lens
2=Diffuse Lens
3=Clear Lens
1G=Prismatic Glass
2G=Diffuse Glass
3G=Clear Glass
4G= Fresnel Glass
Options
A c c e s s o ri e s
TRM4=Metal Trim
WF=White painted
flange (self flanged only) Ring, Specify Finish 1
TRR4=Rimless Trim
Ring
FK5=5 Amp Field
Installable Fuse Kit
300V Max
Notes: 1 Order trim with polymer trim ring
(Consult specification sheet for ordering information and options)
PH OTOM ETR IC S
Candlepower Distribution Curve
Downlight
80°
70°
110
60°
50°
220
330
Cone of Light
Test No. H21335
C4RV 4080LI4G
Lamp = 26W TTT
Spacing Criterion = 0.9
Efficiency = 24.3%
Distance
Fixture to
Lighted Plane
Initial
Footcandles
at Nadir
Beam
Diameter
4'0"
6'0"
7'0"
8'0"
9’0"
10'0"
19
9
6
5
4
3
3'6"
5'6"
6'6"
7'6"
8'0"
9’0"
40°
10°
20°
30°
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
ADP110869
2014-07-24 11:52:00