Greengate
Technical Data
Room Controller QuicKit
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
The Room Controller QuicKits provide a complete, all-in-one package
solution. Easy to order, QuicKits are designed and packaged for
immediate in-room installation.
The Room Controller includes three relays and up to three 0-10
VDC dimming outputs to control compatible dimmable ballasts. The
switching relays and 0-10 VDC outputs are controlled separately,
allowing flexibility in wiring and control. The Room Controller is
shipped preconfigured to work out-of-the-box when connected
to Room Controller devices, allowing quick and easy daylighting
controls, occupancy/vacancy sensing and manual switching.
Features
Packages for Conference Rooms, Offices, Classrooms, and
Healthcare
Click & Go ready, RJ45 connections
Preconfigured for automatic functionality upon power-up
Manual or Automatic On, bi-level, tri-level and dimming control
strategies
Integral Demand Response input with four levels of preconfigured
energy reduction
Built in tubular lighting control with preconfigured wallstation
controls
Integral pillow speaker connections for GPCS (RC3DEHC)
Integral Solatube® connection for classrooms
Guaranteed compatibility with Cooper Lighting LED and 0-10V
fluorescent fixtures
Ladderless UL 924 Emergency Mode testing (RC3DE &
RC3DEHC)
Room Controller QuicKit
October 2015
Specifications
QuicKit Size
Input/Output
Voltage
8.5”H x14”W x11”D
120/277 VAC, 60Hz
Maximum 20A combined load per Room Controller
Ballast load: 20A @ 120/277 VAC
Incandescent load: 15A @ 120 VAC
Description/Operation
The Room Controllers are connected to a 120 VAC or 277 VAC 20
Amp circuit to provide unit power and input power to the individual
relays. The wallstations, occupancy/vacancy sensors, daylight
sensors and receptacle control devices connect via QuickConnect
cables providing a Class 2 connection. Upon power up the preengraved wallstation automatically controls the On/Off relays
and/or adjust the dimming outputs. The daylight sensor will
immediately adjust the lighting levels based on natural light.
Motor load: 1HP @ 120 VAC
Emergency
Output (RC3DE/
RC3DEHC only)
UL 924
Class 2 Dimming
Output
LED Drivers
Operating
Environment
Standards
2
Ballast or Incandescent load: 3A
0-10 VDC, sinks up to 100mA per (40 µA max per
circuit leakage to line)
Each 0-10V output supports up to 50 ballasts/
drivers that draw the standard 2mA each
Requires isolated LED drivers for optimal
performance
Temperature: 32°F to 104°F (0°C to 40°C)
For indoor use
UL Approved
UL 508 Listed
UL 924 Listed
www.eaton.com/lightingsystems
Installation
The line voltage section of the Room Controller provides the
installing contractor space to make all line voltage connections and
direct conduit access, reducing the need for additional junction
boxes, while providing easy access to line voltage circuits. Low
voltage devices are connected using Cat5 cables (See page 4 for
included cables).
UL 924 relay is provided on some units for automatic emergency
lighting control. The UL 924 relay automatically tracks with output 1
and can be connected to any of the three 0-10V dimmers. The
UL 924 relay automatically closes and disconnects the 0-10V control
upon loss of normal power providing adequate egress lighting
control. Ladderless maintenance testing of the UL 924 relay can be
acheived by pressing the ALL OFF button four times.
Room Controller QuicKit
October 2015
Sample Wiring Diagram
ALL MODELS
Neutral
White/Black = 120V Neutral
White/Orange = 277V Neutral
Connect Neutral for Appropriate Voltage.
Note: All provided wiring leads
are #14 AWG wiring.
Wire connections should
be rated suitable for the
wire size employed.
Line In
(120V or 277V)
Cap OFF all Unused Leads
OR
Blue = Room Line In
Black = Power Supply Line In
Adjustable Skylights
QuickConnect Cables
Switchpack
Sensors
Sensors
Slider
Station
Wallstations
+
+
+
A/V
Mode
+
Demand
Response
Alert
Mode
Time
Clock
6
5
Integration Controls
Receptacle
BMS/Out
4
3
2
1
Energy Options DIP Switch
Not Used
3
4
Occ
Vac (default)
Reset
Occupancy
2
Status
1
Energy
Options
Demand Response
Default 10%
20%
30%
40%
0-10V Dimming Outputs
+ + + Dimmer 3
Dimmer 2
RS-485 Connection
0-10V Gain
Adjustment
Blue - EM Line In
Blue - EM Loads Out
Black - Line In
White/Black - 120V N
White/Orange - 277V N
Load 3
Green
High End
Purple = Load 3 Out
Black
Low End
Blue - Load In
Yellow - Load 1 Out
Load 2
White
Red
Integration Controls
Red - Load 2 Out
Purple - Load 3 Out
Red = Load 2 Out
Adjustable Skylights
Load 1
CAUTION: Bonding between conduit connections is not automatic and must be provided as part of the installation.
Load Neutrals
Yellow = Load 1 Out
Terminating Jumper
Communication
Status LEDs
Dimmer 1
Dimmer 3
+
-
Dimmer 2
+
-
Reset Button
Dimmer 1
+
-
0-10V Dimming
Emergency
Panel Neutral
Emergency
Load
Address DIP Switch
Yellow = Emergency Load Out
Emergency Line In
(120V or 277V)
Blue = Emergency Line In
RC3DE MODEL ONLY
Sample Room Connections
Room Controller
Ceiling
RC3DE
Adjustable daylight
sensor dome
Up to 6 Lighting Zones
(3 Relays and 3 Dimmers)
Wall
Daylight sensor
DSRC-FMOIR
OCC-RJ45
Dual Technology
Wall/Corner
Occupancy/Vacancy Sensor
Egress Output (or additional lighting zone)
OCC-RJ45
OAWC-DT-120W
BMS Output (BMS integration)
OCC-RJ45
Row 1
Entry
Row 2
Row 3
All Off
Raise
Lower
All Off
20A Receptacle Control
SPRC-R-20-120
Teacher Station
RC-6TSB-TS7-*
Entry Station
RC-2TLB-EC1-*
Output for Egress Lighting
Control, BMS output or
Receptable Control
www.eaton.com/lightingsystems
3
Room Controller QuicKit
October 2015
Ordering
Catalog Number
RCQK-RC3DE-CONF
RCQK-RC3D-OFFICE
RCQK-RC3DE-CLASS
RCQK-RC3DEHC
Included Components
Description
RC3DE-PL (QTY1)
Room controller - Dimming, emergency relay, plenum rated
SPRC-R-20-120 (QTY1)
20A receptacle switchpack
DSRC-FMOIR (QTY1)
Daylight sensor/infrared receiver
OAWC-DT-120W (QTY1)
Corner/Wall mounted dual tech occupancy sensor
OCC-RJ45 (QTY1)
Input/Output device
GGRJ45-10P-G (QTY1)
Quickconnect cable 10 ft. plenum rated
GGRJ45-006-G (QTY1)
Quickconnect cable 6 inch
GGRJ45-25P-G (QTY3)
Quickconnect cable 25 ft. plenum rated
RC-6TSB-P2 (QTY1)
6 button Preset Wallstation
RC-6TSB-ZAD (QTY1)
6 button 3-zone dimming wallstation
HHPR-RC (QTY1)
Handheld personal remote
RC3D-PL (QTY1)
Room controller - Dimming, plenum rated
SPRC-R-20-120 (QTY1)
20A receptacle switchpack
OAC-DT-2000-R (QTY1)
Ceiling mounted dual tech occpancy sensor
DSRC-FMOIR (QTY1)
Daylight sensor/infrared receiver
OCC-RJ45 (QTY1)
Input/Output device
GGRJ45-10P-G (QTY1)
Quickconnect cable 10 ft. plenum rated
GGRJ45-25P-G (QTY3)
Quickconnect cable 25 ft. plenum rated
RC-5TSB-OS2 (QTY1)
5 button Preset Wallstation
RC3DE-PL (QTY1)
Room controller - Dimming, emergency relay, plenum rated
SPRC-R-20-120 (QTY1)
20A receptacle switchpack
DSRC-FMOIR (QTY1)
Daylight sensor/infrared receiver
OAC-DT-2000 (QTY1)
Ceiling mounted dual tech occpancy sensor
OCC-RJ45 (QTY1)
Input/Output device
GGRJ45-10P-G (QTY1)
Quickconnect cable 10 ft. plenum rated
GGRJ45-25P-G (QTY4
Quickconnect cable 25 ft. plenum rated
RC-4TSB-TS5 (QTY1)
4 button Preset Wallstation
RC-6TSB-TS4 (QTY1)
6 button Preset Wallstation
RC3DEHC-PL (QTY1)
Room controller - Dimming, emergency relay, healthcare, plenum rated
OCC-RJ45 (QTY1)
Input/Output device
DSRC-FMOIR (QTY1)
Daylight sensor/infrared receiver
GGRJ45-25P-G (QTY4)
Quickconnect cable 25 ft. plenum rated
GG37P (QTY1)
37 pin receptacle
GPCS-3Z-DIM (QTY1)
Patient control station 3 zone raise/lower
RC-6TSB-HC2 (QTY1)
6 button Preset Wallstation
RC-4TSB-HC1 (QTY1)
4 button Preset Wallstation
Note: Please refer to the Room Controller page on our website for more
information
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton
Lighting systems
203 Cooper Circle
Peachtree City, GA 30269
www.eaton.com/lightingsystems
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. TD503042EN
October 16, 2015
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.