FAIL-SAFE

advertisement
FAIL-SAFE
D ES C R IPTION
The Fail-Safe VR 2000 Brick combines strength-gaining architecture
with energy-saving technology. Architecturally angled facets with
radius corners actually increase the ability of the lens to deflect blows
and absorb impact. Extra thick injection-molded polycarbonate lens
incorporates an optical design that obscures the lamp image and spreads
light evenly. UL/cUL listed for wet locations. Mount on non-combustible
surface. The durable, versatile Brick BC/BW is perfect for use in corridors,
dormitories, public rest rooms, rapid transit stations, loading docks and
minimum security institutions.
®
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Fa s t e n e r s
L e ns
S ock et
Four T20 stainless steel TORX®
screws with center reject pin.
Screw heads are recessed into lens
to maximize tamper-resistance.
Fasteners are captive in the lens
and sealed by means of a neoprene
O-ring.
One-piece, injection-molded UV
stabilized polycarbonate, min.
0.130" thick. All light control prisms
and blondels are on the inside
surface of the lens, reducing dirt
build-up and making cleaning
easier.
Polycarbonate: Dedicated to correct
lamp wattage. Incandescent is
porcelain medium base with nickelplated brass screw shell.
SC B H o u s i n g
Re fl e c tor
(Optional Accessory) Cast
aluminum, black. Thickened areas
occur at lens junction and at
mounting/fastening holes. Four
1/4" dia. fasteners are required
for maximum vandal resistance.
Four 1/2" NPT entries for surface
conduit.
16 ga. CRS reflector with white igh
reflectance polyester powder coat
finish.
Gasket
One-piece, die-cut closed cell
EPDM mounting gasket seals entire
lens and housing.
B allast
Copper wound NPF, HPF or
electronic ballast are available with
certain wattages. Consult ordering
information.
Labels
UL/cUL listed for wet locations.
L a mp
VE = Vertical Eyelid
By others.
5-1/2"
[140mm]
HE = Horizontal Eyelid
9-1/4"
[235mm]
PP = Perimter Paint
SID E D IM ENS IONS
Flat
Shallow
BC
BW
Deep
Compact Fluorescent
High Pressure Sodium
Incandescent
Vandal Resistant
4-1/4"
[108mm]
4-1/4"
[108mm]
4-1/4"
[108mm]
1-7/8"
[48mm]
2-1/2"
[64mm]
Polycarbonate
Clear Prismatic or White
ENERGY DATA
For Energy Management related
technical data to support the
performance of this fixture series,
refer to the ordering information for
input wattage.
ADC041344
2014-08-13 09:54:31
BC / BW
ORDER IN G INFOR M A TION
SAMPLE NUMBER: QDBC-PP-18N-120V
Paint
Configuration
Product
Family
Lamp
Type
TT=Twin Tube Fluorescent
Blank= No paint 2
QD=Quad Tube Fluorescent
PP=Perimeter Paint
CT=Compact Triple Tube
Fluorescent
HE=Horizontal Eyelid
VE=Vertical Eyelid
HP=High Pressure Sodium
IN=Incandescent
Wattage
7=7W Twin Tube
9=9W Twin Tube
13=13W Quad
18=18W Quad
26=26W Quad or Triple
32=32W Triple
35=35W HPS
75=75W INC
BC=Clear Prismatic
Polycarbonate Lens
Voltage
Ballast
Options
120=120V
277=277 V
(Fluorescent Only)
Accessories
(Order separately)
Color
Blank=Black (Standard) 3
WHT=White
DBZ=Bronze
AP=Gray
F1=Single Fused
LL=Lamp Included
RP=Rust-proof
construction
1
PB-120V=Photocell Kit
1
PB-277V=Photocell Kit
SCB=Shallow Surface
Conduit Box, Black
VRSD =T20 Center-pin
tamperproof
TORX®-head bit
NOTES:
N=Normal Power Factor
BW=White Polycarbonate Lens
1 Requires shallow or deep back box.
2 Black is standard for PP, HE or VE.
Leave blank if paint not required.
3 Leave blank for black (standard).
H=High Power Factor
(Consult factory)
A=Electronic
ORDER IN G M A TR IX
LAMP
TYPE / WATTAGE
TT (Twin Tube)
7=7W
.. ..
9=9W
QD (Quad Tube)
H
A
18=18W
1
26=26W
1
CT (Compact Triple)
1
1
HPS (High Pressure Sodium)
35=35W (1)
IN (Incandescent)
75=75W
277
MT
1
1
32=32W
..
..
..
.. ..
.
120
1
13=13W
26=26W
OPTIONS
VOLTAGE
BALLAST
N
*
*
..
...
. ..
.
F1
LL
RP
5
5
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
= Available
= Not available
2
2
3
3
2
2
3
2 = Supplied with shallow
3
3 = RP not required when
2
2
5, 6
2
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
1 = Supplied with deep
casting
3
3
3
ALL HPS FIXTURES SUPPLIED WITH DEEP CASTING.
5
.
casting
casting is supplied
4 = Only available as HPF
5 = Not necessary/applicable
when using electronic
ballast
6 = Double fusing
availablealso; specify FZ
5
3
Specifications and
dimensions subject to
change without notice.
ADC041344
2014-08-13 09:54:31
Download