Installation Instructions
Model # TSC30-NA
INS #
TSC30-NA – 3.5” LCD Color Touchscreen
Introduction
The LCD color touch screen is a flexible device which
provides an intuitive “user friendly” method of including
menu driven control functions of the iLumin control
system. The LCD touch screen provides flexibility of
system control to allow end users to decide what
they want to see and how they see it. Completely
software based, programs and images can be tailored
to incorporate building plans, photos or 3D graphics to
further customize the display. The touch screen can also
be used to provide control of other integrated systems.
Mounting Instructions
The touchscreen requires an external power supply. A
PELV / Class 2 power supply has been provided for this
purpose. Connect the PELV / Class 2 power supply to a
120VAC power circuit and to the touchscreen as shown in
the installation diagram. The PELV / Class 2 power supply
can be mounted in the provided wallbox.
Connect the iCANnet Belden 1502 to the provided
network terminal block as depicted in the installation
diagram. This network should be daisy chained, not
T-Tapped to the device.
If the Touchscreen is located at the end of the iCANnet
network, please ensure that the termination resistor
provided with the product is wired between the CAN-H
and CAN-L wire terminals on the terminal block. If the
device is located in the middle of the network, remove
the provided termination resistor.
USB Connector
Network Programming
Dimensions
5.50”
(146mm)
Mounting Screws
RJ12 Socket
Touchscreen Programming
The unit should be installed in a dry location, where
ambient temperature and humidity are within the
operating limits of the unit. To avoid damage to the
display, it is recommended that the touchscreen is
installed after painting/wallpapering has been done.
The low voltage touchscreen should be mounted
horizontally using the supplied custom wallbox. The
supplied wallbox dimensions are (5.24” x 3.00” x 1.89”).
3.25”
(86mm)
Mounting Instructions
Cabling/Termination
Programming Other Devices
Hot – brown
9V PELV / Class 2
Power Supply
Neutral – blue
500mA minimum,
1 Amp recommended
A programming port that allows access to the complete
network from the iCANsoft program is available from the
front of the touchscreen. This allows the commissioning
agent to easily access all devices on the network. To
program devices on the network, connect a PC Node to the
RJ12 socket.
NNote: The sockets are concealed behind the metal
coverplate. This can be removed easily by unclipping
from one side.
Care and Maintenance
The cover plate should only be cleaned gently with a clean
damp cloth. Abrasive cleaners, polishes, solvent based
cleaning agents or alkali based cleaners should not be used.
Programming the TSC30 Color Touchscreen
Using iCANsoft or the Touchscreen Editor Software,
the commissioning agent will program the pages in the
touchscreen. Downloading the configuration is done via the
USB connector. DO NOT connect the touchscreen to a PC
until after iCANsoft or Touchscreen Editor Software has been
installed.
2
TSC30-NA – 3.5” LCD Color Touchscreen
Specifications
Specifications
Supply:
+9Vdc 1 Amp via separate power supply
Display:
3.5 inch (89mm) diagonal backlit LCD screen with
analogue touch overlay.
¼ VGA (320x240 pixel) 65,000 colors
Electrical
Supply: +9Vdc 1 Amp via included power supply
iCANnet and power supply connection: Two-part
screw terminals able to accept 16AWG (1.5mm2)
stranded or solid wire.
Mechanical Data
Wallbox: Custom wallbox supplied with product.
(5.24” x 3.00” x 1.89”)
Standard fascia colors: white, black, ivory, and
stainless steel.
Environmental Data
Temperature: +0ºC to +40ºC
Humidity: 0% to 95% non condensing
Pollution Category 3
Configuration
Programming via iCANsoft, via USB.
Functionality
Scene Selection
Scene programming
Channel level indicated with bar graphs
Local scene and channel naming
Default screen programming
Ability to import room layout drawings, customer
logos & graphics
Ability to insert soft buttons for activating scenes
and/or channels.
Warning
This is device is classed as PELV / Class 2, segregation in accordance with local wiring codes.
Standards
TSC30-NA – 3.5” LCD Color Touchscreen
3
WARRANTIES AND LIMITATION OF LIABILITY
Please refer to www.coopercontrol.com under the Legal section for our terms and conditions.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
CooperControl.com
© 2014 Eaton
All Rights Reserved
Printed in USA
P/N: 9850-000467-00
Eaton is a registered trademark.
All trademarks are property
of their respective owners.