Fail-Safe
D ES C R IPTION
The Fail-Safe FWL (up/down) or FWLDL (down only) wall or ceiling fixture
combines security features along with diminutive size, attractive styling
and LED technology. Less than 4” deep, a dedicated back-pan combined
with a one-piece housing maximizes impact resistance and prevents
unauthorized fixture penetration. Ideally suited for schools, mental
health facilities, stairwells, corridors, detention centers, and public
transportation areas.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Fa s t e n e r s
L e ns Re te nti on
Fin ish
Stainless steel tamper resistant T20
torx or allen head screws.
Lens secured by thru-studs and
vertically adjustable internal steel
hold downs.
Electrostatically applied, matte
white powder coat finish. Gloss
white paint available. Custom
colors also available. Supply RAL
number, paint chips, or paint
manufacturer catalog number.
H ou s i n g / B a c k p a n
Dedicated backpan mounts with
multi-point mounting. Housing
is attached to the backpan with
tamper resistant screws. Stainless
steel safety cables secure housing
to the backpan.
L ED
LEDs available in 3000K, 3500K,
4000K and 5000K with CRI > 85.
Projected life is 50,000 hours at
70% lumen maintenance.
Driver
Electronic, standard 0-10V
dimming.
Le n s
Labels
Various lens combinations up to
0.375” thick.
ETL listed for damp locations.
FWL
FWL
FWLDL
6"
[153mm]
7-9/16"
[193mm]
FWLDL
FWL
FWLDL
3-3/4"
[96mm]
3-3/4"
[96mm]
LD4 LED
Healthcare: Patient
Confinement
ORD ER ING INFOR M AT I O N
SAMPLE NUMBER: FWL-D-2-LD4-UNV-STD/STD-35-89CX/86-EDC2-2C-GW
or
FWLDL-D-4-LD4-UNV-STD-35-86-EDC1
CEILING/WALL
LD4 UNV
Series
FWL=Wall or Ceiling
FWLDL=Wall or Ceiling,
Downlight Only
/
Voltage
UNV=120V-277V
Material
D=16GA CRS
X=14GA CRS
Up Light Level (FWL only)
STD=Standard Output
LO=Low Output
HI=High Output
Length
18=18" 2
2=2' 3
4=4'
Down Light Level
STD=Standard Output
LO=Low Output
HI=High Output
LED
LD4=Linear LED
Version 4.0
Color Temperature
30=3000K
35=3500K
40=4000K
50=5000K
Notes:
1 Two circuits not available on FWLDL.
2 FWDL not available in 18” length.
3 FWDL 2’ available with STD or HI settings only
Inner Lens
80=0.125” Pattern 12 Acrylic
84=0.125” Clear Polycarbonate
Circuits
1=1 Circuit
2=2 Circuits 1
Center Lens (optional)
80CW=Highly Transmissive
Diffuse Lens, for optimal
Pixellation Management, 0.02”
thick
89CX=Dot Screen Acrylic, 0.02“
thick
Options
GW=Gloss White Paint
AMA=Anti-microbial Matte
White Paint, All Parts
AMH=Anti-microbial Matte
White Paint, Outer
Housing Only
SHP=Stainless Steel
Housing, Powder Coat
Painted White
SHN=Stainless Steel
Housing, Brushed
NTP=Non-tamper Proof
Fasteners
(Phillips-head screws)
Outer Lens
84=0.125” Clear Polycarbonate
85=0.187” Clear Polycarbonate
86=0.25” Clear Polycarbonate
Driver
EDC_=Electronic Driver, Non-dimming
EDD_=Electronic Driver, 0-10V Dimming 10%
ED1D_=Electronic Driver, 0-10V Dimming 1%
TORX® is a registered trademark
of Camcar Division of Textron Inc.
PS519041EN
2016-02-12 10:54:27
FW L, FW LDL
NOMINA L INP UT WATTS/DELIVERED
L UME NS ( 3 5 0 0 K)
F WL MOUNTING D IM ENS I O N S
0.875"
7/16" x 3/4"
[22mm]
[12mm] [20mm]
Hole for
(4) Mounting Holes
Power Entry
8" [204mm]
4-1/2"
[115mm]
16" [406mm]
17-3/4" [450mm]
8" [204mm]
Low
21.2
1200
18"
Standard
26.6
1500
High
29.8
1675
Low
31.8
1800
Standard
42.5
2400
High
52.9
3000
Low
63.4
3600
Standard
85.0
4825
High
105.8
6025
24"
7/16" x 3/4"
[12mm] [20mm]
(4) Mounting Holes
48"
7-1/8"
[182mm]
1/2"
[13mm]
4-1/2"
[115mm]
3-11/32"
[98mm]
16" [406mm]
23-3/4" [602mm]
FWLDL
1-5/16"
[34mm]
0.875" [22mm]
Hole for Power Entry
7"
[178mm]
14" [356mm]
47-3/4" [1212mm]
14" [356mm]
1-5/16"
[34mm]
Nominal
Delivered
Lumens
Low
10.6
600
Standard
13.3
750
High
15.9
900
Output
Level
18"
24"
4-1/2"
[115mm]
14" [356mm]
Nominal
Input
Watts
Length
7/16" x 3/4"
[12mm] [20mm]
(8) Mounting Holes
7-1/8"
[182mm]
1/2"
[13mm]
2-7/8"
[73mm]
Nominal
Delivered
Lumens
Output
Level
1-5/16"
[34mm]
0.875"
[22mm]
Hole for
Power Entry
Nominal
Input
Watts
Length
7-1/8"
[182mm]
1/2"
[13mm]
7/8"
[22mm]
FWL
48"
Low
15.9
900
Standard
21.3
1200
High
26.5
1500
Low
31.8
1800
Standard
42.5
2400
High
52.9
3000
* Lens tested was “86”; 0.25” clear
polycarbonate
* 89CX optional lens will decrease
delivered lumens by approximately 1/3.
* Nominal input wattage values include
LED voltage, drive current and typical
driver efficiency. Refer to LM 79 data/photometric files for exact delivered lumen
values and input wattage. Values in table
are nominal values only.
F WL DL M OUNTING D IM EN S I O N S
0.875"
7/16" x 3/4"
[22mm]
[12mm] [20mm]
Hole for
(4) Mounting Holes
Power Entry
8" [204mm]
5-5/8"
3-1/2" [144mm]
[89mm]
1-1/2"
[39mm]
7/8"
[22mm]
16" [406mm]
17-3/4" [450mm]
1-1/16"
[27mm]
0.875"
7/16" x 3/4"
[22mm]
[12mm] [20mm]
Hole for
(4) Mounting Holes
Power Entry
8" [204mm]
5-5/8"
3-1/2" [144mm]
[89mm]
1-1/2"
[39mm]
3-7/8"
[99mm]
1-1/16"
[27mm]
16" [406mm]
23-3/4" [602mm]
7"
[178mm]
0.875"
7/16" x 3/4"
[22mm]
[12mm] [20mm]
Hole for
(4) Mounting Holes
Power Entry
5-5/8"
3-1/2" [144mm]
[89mm]
1-1/2"
[39mm]
2-7/8"
[22mm]
14" [356mm]
14" [356mm]
47-23/32" [1212mm]
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
14" [356mm]
1-1/16"
[27mm]
PS519041EN
2016-02-12 10:54:27