The perfect complement to the Jaylum pendant luminaire, the Jaylum Wall
LED features crisp modern lines in a small non-obtrusive form factor. The
Jaylum wall can be mounted over standard 2x4 inch J-Boxes for individual or continuous configurations using 4 and 8 foot modular sections while maintaining ADA compliance. The series is an excellent choice for commercial office spaces, schools, reception areas, corridors and restrooms.
Low profile housing and integral gear tray constructed from die-formed 20 gauge cold rolled steel forming a 4” x 1-1/2” ADA compliant profile.
Fixture weight = 2.0 lb/ft.
Reflector pan is painted with a high reflectance white powder coat finish.
Optional die-formed side reflectors are highly specular anodized aluminum.
Standard endcaps are rounded die cast aluminum and mechanically attached flush to end of fixture without exposed fasteners. End cap adds 1/2” at each end.
Bottom lens is high light transmission
0.118” thick clear microlinear prismatic acrylic or a high light transmission
0.08” thick frosted acrylic material.
Top dust covers are available.
T5/T5HO fixtures use UL listed
Class P, program rapid start universal voltage electronic ballasts with a power factor greater than 0.95 and a less than
10% THD. T8 fixture use Class P,
T8 instant start universal voltage electronic ballasts with a power factor greater than 0.98 and a less than 10% THD. cULus listed.
Suitable for damp locations.
Fixture mounts directly to structure over a 2 x 4 inch standard electrical box mounted horizontally into the wall. Refer to installation instructions for details.
Fixture housings are high reflectance white (standard) using electrostatically applied polyester powder coat paint. Silver and custom colors are available.
T8, T5, and T5HO
Sample Number: JW-SL-1T8-1D-UNV-AC48-T1-16’-5LT-W
= Wall Mount J-Box
Micro Prismatic Lens
= Specify Row Length (4)
Number of Lamps
(in cross section)
T5 Normal Output
T5 High Output
T8 Normal Output
= Fifth Light DALI (6)
= Fifth Light 0-10V Program Rapid Start
Fifth Light 0-10V Spec Grade Program Rapid Start (7)
= Dust Cover (8)
= Custom Color
See page 2 for technical notes
1 of 2
JAYLUM - JW
57% UP / 43% DOWN
4786 4948 6859
16404 11228 8206
1. Maximum one ballast per 4’ fixture.
2. Consult factory for available battery options.
3. Universal voltage accommodates 120/220/240/277V at 50/60Hz
4. Standard row configurations over 8’ consist of 4’ and 8’ luminaires.
5. Consult factory for other available ballast options.
6. Must be used in conjunction with a DALI control system. For a complete listing of Fifth Light Technology products and other solutions from Cooper
Controls, visit www.coopercontrol.com.
7. Specification grade 0-10V dimming ballast are NEMA premium and CEE listed. They are compatible with low mercury and energy saving lamps.
8. Dust Cover not available in T8 lamping.
18001 E. Colfax Avenue
Aurora, CO 80011
P: 303-393-1522 www.eaton.com/lighting
Specifications and dimensions subject to change without notice.
2 of 2