COOPER LIGHTING - SURE-LITES ®
DESCRIPTION
Versatile "mini-system" features electronic reliability, quality metal
construction, surprising economy, optimum illumination and attractive
compact appearance. The popular choice for commercial, institutional
and public facilities where moderate loads, economy, ease of installation,
safety, and reliability are important. Maximum emergency lighting
efficiency is combined with low profile appearance.
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
E l e c t ro n i c
H o u s i n g C o n s t ru c t i o n
Wa rra n t y
- Dual Voltage Input
120/277 VAC, 60 Hz
- Line-latching
- Solid-state Voltage Limited
Charger
- Solid-state Switching
- Low-Voltage Disconnect
- Brownout Circuit
- Overload/Short
Circuit Protection
- Test Switch/Power
Indicator Light
- 22-Gauge Die-Formed Steel
- Knockout, Conduit or Cord Set
- Universal J-Box
- Mounting Pattern
- Keyhole Mounting Slots
- White Finish
- Unit: 1-year
- Battery: 15-year pro-rata
H e a d / L a m p Da t a
- Two PAR 36 Type Lamps
- Glare-Free Lens
- Fully Adjustable
Heads Standard
- High Impact - Thermoplastic
- Matches Housing Finish
Code Compliance
- UL 924 Listed
- Life Safety NFPA 101
- NEC/OSHA
- Most State and Local Codes
B a tte r y
AA
SERIES
- Sealed Nickel Cadmium
- Maintenance-free, Long-life
- Full Recharge Time,
24 hrs. (max.)
- Color Coded Leadwires
ST E E L
DOUBLE HEAD
M E TA L B O DY
SEALED NICKEL
C A D M I U M B AT T E RY
9 1/8 "
[232mm]
4 1/2 "
[114mm]
E M E R G E N CY L I G H T I N G
2 1/4 "
[57mm]
2 1/4 "
4 1/4" [108mm] 4" [102mm]
]
[57mm]
5" max
[127mm]
6 1/8" [156mm]
12 1/4" [311mm]
E L E C T R I C A L R AT I N G S
R a t e d W a t t a ge to 87 1/2% of Rated D.C. Voltage
Model
Battery
DC Voltage
1 1/2 Hours
AA8
SNC3
6
15
2 Hours
12
L a m p I n f o r m a t i on
3 Hours
8
4 Hours
6
Type
Wattage
Number
Incandescent
7.2
29-88
ORDERING INFORMATION
Series
AA8
Notes: 1
Options 1, 2
V=Voltmeter3
Accessories
4
SD=Self Diagnostics
TDM=Time Delay Monitor
1MSWH=Mounting Shelf, White
Mounting Kit
1BRWH=Mounting Brackets (2) White
Protective Housing
Add as a suffix.
WG1=Wire Guard
Consult your Cooper Lighting Representative for alternate lamps
and additional options.
VS1=Polycarbonate Vandal Shield
3
Provisions for one meter only.
VS1WP=Polycarbonate Vandal Shield - Weatherproof
4
Order separately.
VK1=Voltmeter
2
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
E N E R G Y D ATA
AA8
Input Current (Max.):
120V= .06A
277V= .03A
ADX041149 pc
2010-07-26 10:33:49
AA SERIES
P H OTO M E T R I C S
Horizontal Distribution
Ve r t i c a l D i s t r i b u t i o n
10
FEET
LEFT
10
FEET
LEFT
1FC
0
0.5
0.3
0.2
LAMP
AXIS
1FC
0
FEET
RIGHT
10
0.5
0.3
0.2
LAMP
AXIS
FEET
RIGHT
10
0
10
20
30
40
FEET FROM LAMP (Measured on axis)
50
60
0
Lamp No. Z-4
15
FEET
LEFT
0
FEET
RIGHT
15
0
10
20
30
40
50
FEET FROM LAMP (Measured on axis)
60
Lamp No. Z-4
1FC
0.5
0.3
0.2
0.1 LAMP
AXIS
10
20
30
40
50
60
15
FEET
LEFT
0
FEET
RIGHT
15
0
1FC
0.5
0.3
0.2
0.1 LAMP
AXIS
10
20
30
40
60
50
FEET FROM LAMP (Measured on axis)
FEET FROM LAMP (Measured on axis)
Lamp No. 29-88
Initial Lumens – Z-4 @ 48
29-88 @ 101
Lamp No. 29-88
T E C H N I C A L DATA
Heads
S o l i d - S t a te C h a rge r
L ow- Vo l t a ge D i s c o n n e c t
The lamp housing is constructed of flameresistant and impact-resistant injection molded
thermoplastic with matching finish. The three
dimensional swivel assembly permits
approximate aiming adjustment from 80°
vertical and 358° rotation. The placement is
secured with a lockable pivot mounted on a
rotating base ring.
Supplied with a 120/277 VAC, voltage regulated
solid-state charger. Immediately upon
restoration of AC current after a power failure,
the charger provides a high charge rate. The
charge circuit reacts to the condition of the
battery and alters the rate of charge in order to
maintain peak battery capacity and maximize
battery life. Solid-state construction recharges
the battery following a power failure in
accordance with UL 924.
When the battery’s terminal voltage falls below
80% of the rated voltage, the low-voltage
circuitry disconnects the lighting load. The
disconnect remains in effect until normal utility
power is restored, preventing deep battery
discharge.
Lamps
Designed specifically for emergency lighting
applications, the PAR 36 sealed beam type
design insures optimum glare-free trapezoidal
light distribution along with horizontal and
vertical adjustment by rotating the lens within
the housing.
Housing
The rugged 22-gauge die-formed steel housing
is finished with white corrosion-resistant
polyester powder coat paint. Cabinet has
keyhole mounting slots and knockouts in rear
and side for AC/DC wiring connections and has
universal mounting pattern.
L i n e - L a t ch e d
Sure-Lites’ line-latched electronic circuitry
makes installation easy and economical. A labor
efficient AC-activated load switch prevents the
lamps from turning on during installation to a
non-energized AC circuit. Line-latching
eliminates the need for a contractor’s return to a
job site to connect the batteries when the
building’s main power is permanently turned
on.
O ve rl o a d a n d S h o rt - C i rc u i t P ro te c t i o n
The solid-state overload monitoring device in
the DC circuit disconnects the lamp load from
the battery should excessive wattage demands
be made and automatically resets when the
overload or short-circuit is removed. This
overload current protective feature eliminates
the need for fuses or circuit breakers for the DC
load.
B row n o u t C i rc u i t
The brownout circuit in Sure-Lites’ units
monitors the flow of AC current to the unit and
activates the emergency lighting system when a
predetermined reduction of AC power occurs.
This dip in voltage will cause most ballasted
fixtures to extinguish causing loss of normal
lighting even though a total power failure has
not occurred.
S o l i d - S t a te Tra n s fe r
The unit incorporates a solid-state switching
transistor which eliminates corroded and pitted
contacts or mechanical failures associated with
relays. The switching circuit is designed to
detect a loss of AC voltage and automatically
energizes the lamps. Upon restoration of the AC
power, the emergency lamps will switch off and
the charger will automatically recharge the
battery.
Te s t Sw i t ch / Powe r I n d i c a to r L i g h t
Conveniently located combination Test
Switch/Power Indicator Light allows for manual
verification of proper operation of the transfer
circuit and emergency lamps.
S e a l e d N i cke l C a d m i u m B a tte r y
Sure-Lites sealed nickel cadmium batteries are
maintenance-free with a life expectancy of 15
years. The sealed rechargeable nickel cadmium
battery utilizes positive and negative sintered
plate construction which offers high discharge
rates and stable performance over a wide range
of temperatures. The specially designed
resealable vent automatically controls cell
pressure, assuring safety and reliability. This
battery is best suited for harsh ambient
temperatures because the electrolyte is not
active in the electrochemical process. The nickel
cadmium battery can be operated from 0°C to
50°C.
Wa rra n t y
All Sure-Lites’ units are backed by a firm oneyear warranty against defect in material and
workmanship (excluding lamps). Rechargeable,
long-life, sealed nickel cadmium batteries carry
a fifteen-year pro-rata warranty.
Specifications and dimensions subject to change without notice.
Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADX041149 pc
2010-07-26 10:33:49
2010-07-26 11:07:39