8
5
6
7
4
2
3
CONFIDENTIAL -
4
5
The Information contained in this document is the property of Cooper
Industries, Inc. It is not for public disclosure. Possesion of the Information
does not convey any right to loan, sell, or disclose the Information.
Unauthorized reproduction or use of the Information is Prohibited. This
document is to be returned to Cooper Industries, Inc, upon completion of the
purpose for which it is loaned or upon request.
7
REV.
1
D
1
2
6
3
4
Cooper Industries, Inc.
REVISIONS
DESCRIPTION
REMOVED J, ADDED N TO PLANT CODE.
ECN BU-N08025 MK
REVISED COVER VIEW (LOC. D-5), ADDED COMMENT FOR
NYLOCK NUTS AND FLAT WASHERS IN BOM, ADDED
"OPTION" TO COMMENTS FOR COVER, REVISED DIMS ON
SHEET 2
ECN BU-N08050 MK
6 POLE PICTORIAL VIEWS REPLACED W/5-POLE, CHG'D
REF. TO 2, 3 & 5 POLES AVAILABLE, -2 VERSION REMOVED
MOUNT. HOLES
ECN BU-U09085 MK
DATE
08/25
2008
APPROVED
09/25
2008
D
04/20
2009
4
REVISED LMGX-X-XXXX TO LMGXX-X-XXXX, DELETED
REFERENCES TO FUSE SIZES, ADDED CONFIGURATIONS
ON TABLE 1
ECN BU-U09198 JS
11/17
2009
5
ADDED METRIC TORQUE 10.8 - 13.6 N-m
ECN BU-U10076 KF
04/29
2010
2
1
COPYRIGHT
This is an unpublished work. The disclosure of this work is limited to a
select personnel. Futher dissemination or disclosure to the public is
PROHIBITED.
This unpublished work is protected by Federal Copyright Law and all
rights thereunder are reserved by Cooper Industries, Inc.
LMGXX - X - XXX(X)
OPTIONAL
(CONSULT FACTORY)
3
C
CUSTOMER SPECIFIC CONFIGURATION
AND / OR FUSE AMPERAGE
SEE TABLE 1 BELOW
C
STYLE
-1 : MOUNTING HOLES BETWEEN STUDS
HARDWARE TYPE (M FOR METRIC, E FOR ENGLISH)
FUSE POSITIONS / POLES : (2, 3 & 5 AVAILABLE)
BILL OF MATERIALS
ITEM #
DESCRIPTION
QUANTITY
1
HOUSING
1
B
2
A
BUSSBAR
3
FUSE
4
LOCKWASHER
1
DICTATED BY POLE
QUANTITY AND
CUSTOMER
REQUIREMENT
1 - PER STUD AND HEX
BOLT
5
HEX NUT
1 - PER STUD AND HEX
BOLT
6
COVER
1
7
HEX BOLT
2
TOLERANCES
UNLESS OTHERWISE SPECIFIED
METRIC (mm)
ENGLISH (in)
TRANSPORTATION
REV 3/08 - Size C
8
1 PL DEC.=
2 PL DEC.=
7
.25
.13
2 PL DEC.= .01
3 PL DEC.= .005
COMMENTS
P/N DICTATED BY POLE
QTY & THD TYPE
2, 3 & 5 POLE CURRENTLY
AVAILABLE
P/N DICTATED BY POLE
QUANTITY
CONSULT FACTORY FOR
AVAILABLE FUSES
-000
NO FUSES, NO COVER
-001
NO FUSES, WITH COVER
-002
NO FUSES, NO COVER, NO BUSSBAR
-XXX
CUSTOM (CONSULT FACTORY)
B
NOTES:
NYLOCK NUTS & FLAT
WASHERS ARE AVAILABLE
OPTIONS
EDPM MATERIAL, RED IN
COLOR
AVAILABLE AS AN OPTION
THIRD ANGLE PROJECTION
ANGULAR TOL=
2
1
FRACTIONAL TOL = 64IN
6
TABLE 1 - XXX(X) CONFIGURATIONS
CAPSULE AROUND DIMENSION
INDICATES INCOMING INSPECTION
REQUIRED
INDICATES CRITICAL CHARACTERISTIC
(MUST MEET CPK REQUIREMENTS)
5
1.
2.
3.
4.
Plant Code:
N
Design Units
Metric [English]
FOR STANDARD PRODUCT, SEE BOM.
FOR SPECIFIC CUSTOMER CONFIGURATIONS SEE ASSEMBLY DRAWINGS.
TORQUE NUTS (WHEN APPLICABLE) 10.8 - 13.6 N-m [8 - 10 FT-LBS]
100A MAX ALLOWABLE CONTINUOUS CURRENT PER POLE. CONSULT FACTORY
FOR FUSE APPLICATION.
For change history please consult the
Bussmann Engineering Change Notice
number listed below.
BU-U10076
4
TITLE
DATE
ASSEMBLY, LMG
SHEET
1 OF 2
SCALE
3
1:2
REVISION.VERSION
PART NO.
5.
04/29/10
DRAWN BY
KFITCH
LMGXX-X-XXX(X)-SALES
THIS IS A SOLIDWORKS DRAWING
2
Ref. Name: LMGXX-X-XXX(X)-SALES
CBT B-Size
1
A
8
6
7
5
4
2
3
1
CONFIDENTIAL -
The Information contained in this document is the property of Cooper
Industries, Inc. It is not for public disclosure. Possesion of the Information
does not convey any right to loan, sell, or disclose the Information.
Unauthorized reproduction or use of the Information is Prohibited. This
document is to be returned to Cooper Industries, Inc, upon completion of the
purpose for which it is loaned or upon request.
90.8
3.57
20.0
.79
D
COPYRIGHT
Cooper Industries, Inc.
This is an unpublished work. The disclosure of this work is limited to a
select personnel. Futher dissemination or disclosure to the public is
PROHIBITED.
This unpublished work is protected by Federal Copyright Law and all
rights thereunder are reserved by Cooper Industries, Inc.
REVISION
DESCRIPTION
REV
5
DATE
04/29
2010
SEE SHEET 1
BY
D
HEX BOLTS FOR 5 - POSITION MOUNTED
IN THIS ORIENTATION
INSTALL NUTS SNUG, DO NOT TORQUE
25.0 TYP
.98
25.0 TYP
.98
ALTERNATE MOUNTING BOLT POSTION
PER CUSTOMER REQUIREMENTS
C
C
50.8
2.00
TYP
20.0 TYP
.79
"E" 5/16-18 OR "M" M8 X 1.25 THD.
(TYP)
B
41.5
1.63
B
39.1
1.54
TYP
38.0 TYP
1.50
TABLE 2
19.9
[.78]
TYP
"E" 5/16-18 OR "M" M8 X 1.25 THD.
(TYP)
(50.0 [1.97])
MOUNTING
BOLT LOCATION
"X" (SEE TABLE 2)
(100.0 [3.94])
SEE 5 (ALT)
"X"
MM
25
50
50
100
POLE #
2
3
5
5 (ALT)
NOTES: (UNLESS OTHERWISE SPECIFIED)
1. 5 POSITION ASSEMBLY SHOWN FOR REFERENCE ONLY.
SAME DIMENSIONS APPLY TO REMAINING HOUSINGS.
A
2. PART SHOWN WITHOUT OPTIONAL COVER.
TOLERANCES
UNLESS OTHERWISE SPECIFIED
METRIC (mm)
ENGLISH (in)
TRANSPORTATION
REV 3/08 - Size C
8
1 PL DEC.=
2 PL DEC.=
7
.25
.13
2 PL DEC.= .01
3 PL DEC.= .005
THIRD ANGLE PROJECTION
ANGULAR TOL=
2
1
FRACTIONAL TOL = 64IN
6
CAPSULE AROUND DIMENSION
INDICATES INCOMING INSPECTION
REQUIRED
INDICATES CRITICAL CHARACTERISTIC
(MUST MEET CPK REQUIREMENTS)
5
Plant Code:
N
Design Units
Metric [English]
For change history please consult the
Bussmann Engineering Change Notice
number listed below.
BU-U10076
4
TITLE
DATE
ASSEMBLY, LMG
SHEET
2 OF 2
SCALE
3
1:2
REVISION.VERSION
PART NO.
5.
04/29/10
DRAWN BY
KFITCH
LMGXX-X-XXX(X)-SALES
THIS IS A SOLIDWORKS DRAWING
2
Ref. Name: LMGXX-X-XXX(X)-SALES
CBT B-Size
1
A