Trailer lift gates
Remote battery charging
Trail Charger
Give yourself a lift with the improved Eaton
Trail Charger
The Eaton Trail Charger DC/DC battery chargers allow
operators to charge a remote battery bank at a temperature
compensated voltage. This technology eliminates voltage
loss due to long wire lengths and automatically adjusts for
temperature extremes.
The Trail Charger charges lift gate and other batteries at
the voltage needed, working to keep batteries charged
and ready for your next lift. The Trail Charger smart reduce
mode also eliminates the need for additional cables.
ABOUT
Eaton Trail Chargers recover DC voltage loss from long lines and charge
remote 12V battery banks at a temperature compensated voltage level,
extending your vehicle’s battery life.
With low standby current draw, IP 67 sealing, robust
vibration performance and a proven track record of
successful operation in harsh transportation environments,
Eaton 10A and 20A Trail Chargers set the standard for
ruggedized DC/DC battery chargers.
Output
Lift gate motor draw
Seconds of lift run time
Amp hours used
Lift during daily operations
Total Amp / hours used during day
Total run time required to charge battery
Voltage regulation
IP67 sealed
11010C11
11020C11
11020CL1
10A
175A
25 sec
1.2A/hour
50
60A/hour
8 hours
Temp. compensated
Yes
20A
175A
25 sec
1.2A/hour
100
120A/hour
8 hours
Temp. compensated
Yes
Trail Charger with smart reduce mode
11020CL1
The model 11020CL1 monitors a brake light or other input signal and
reduces the output current when the input signal is activated. A
second input can also monitor the trailer dome lamps and reduce
output current when the dome lamps are active.
To contact an Eaton salesperson
or local distributor, please call
800.845.6269