Accessories For Obstruction Lighting Systems OLF General Use & Class 1 Division Obstruction Certified to: FAA AC 70/7460-1 Compliant to: FCC Rules and Regulations Application Features/Benefits The OLF flasher provides the flashing function for medium intensity beacons, obstruction lights, or other incandescent lamp loads. Meets FAA and FCC requirements Solid-state components for reliability Each flasher circuit operates up to 2,000W of lampload or as low as a single obstruction light Zero voltage switching for longer lamp life Automatic operation using a single PEC photoelectric controller to directly switch the 1-circuit and 2-circuit OLFs and to activate an OLA lighting contactor to switch the 3-circuit OLF Single circuit OLF models have a cast aluminum housing with one-inch threaded hub at top and bottom (70007; 70207; 1-1/2 inch hubs on 70060; 70260) Raintight NEMA 3R box with bottom knockouts (2-circuit and 3-circuit OLFs) Operates on 60 or 50Hz frequency power Voltage tolerance ±15% Optional NEMA 4 enclosure (suffix -N4) Optional RF suppression for hot AM towers (suffix -RF) Weights & Measurements 70007 70008 70009 Shipping Weight: 8.0 lbs 3.6 kg 10.0 lbs 4.5 kg Shipping Volume: 0.5 ft3 0.014 m3 0.5 ft3 0.014 m3 Ordering Information Catalog Number Voltage* 70007 70008 70009 70060** 70207 70208 70209 70260** Number of Outputs 120 120 120 120 230 230 230 230 1 2 3 1 1 2 3 1 Dimension Drawings 70008 & 70009 Mounting Flange Padlockable Catch 10.00 (254) 9.00 (229) 8.00 (203) 3.00 (76) 8.00 (203) Mounting Holes .22 x .41 (6) (10) 6.00 (152) .19 (5) Note: Bottom knockouts for conduit entry. Dimension Drawings 70008 & 70009 70007 70009 70008 Master Flasher 70100 Slave Flasher 70101 Master Flasher 70100 Slave Flasher 70101 Master Flasher 70100 Line Neutral Line1 Line 2 Neutral Home Office: United States – +1 860-683-4300 International Offices: Canada • China • Dubai • Mexico • Brazil Slave Flasher 70101 Beacon with two 620W lamps or any incandescent lamp load totaling 2,000W or less. * If the supply is 120V, 2 wires, wire the terminals as shown and connect the power to Line 1 and neutral. Line1 Line2 Line3 Neutral 8.15