Guidance Signs
AGS S-537
Airside™ Guidance Sign
Compliances:
Transport Canada TP312
Applications
Ordering Information
Airside™ signs Model AGS S-537
are designed for use on airport
taxiways to mark taxi routes and
intersections. Colors may be
black on yellow, yellow on black,
or white on red depending on the
application.
How to Order: To determine the number of modules to fit your message, contact Crouse-Hinds.
For estimating purposes, use two characters per module. Do not count a 1 as a character except
when the message contains an M or W. Maximum of three (3) modules per sign to comply with
the TP312 specification.
Order isolation transformer, transformer housing, coverplate and gasket or baseplate, and
connector kit separately. The colors of the sign faces and the legends must be specified for
each sign. Multiple messages and colors may appear on a sign face.
Features
8 5 8
ƒ CSA Certification of Attestation
ƒ Relamp without removing
sign cover
ƒ Modular design with uniform
leg spacing
ƒ One lamp per module
ƒ Only one internal transformer
per sign
ƒ Slip-in sign faces without
sealants
ƒ Frangible couplings may be
pre-installed on pad and sign
lowered onto them for easy
installation
Number of Faces:
1 = Single Face
2 = Double Face
ƒ 400mm legend
Number of Lamp Modules: 1 to 3:
ƒ 600mm legs
ƒ 62W lamp
ƒ Retroreflective
ƒ Open lamp bypass on 2-3
module signs
ƒ High Va electrical package
with PC board regulated lamp
current
- S 5 3 7 -
Size:
2 = Taxiway Sign,
53˝ (1346mm) High,
400mm Inscription Height,
612mm Face Height
ƒ Lamp by-pass
ƒ Lamp view port
-
Fixture Type:
Brightness Levels:
3 = FAA Class 1 & 2, Style 2
(3 Steps, 4.8 to 6.6A)
5 = FAA Class 1 & 2, Style 3
(5 Steps, 2.8 to 6.6A)
ƒ High strength aluminum
extrusion housing
-
Transport Canada Configuration:
Options:
12 = On/Off Power Switch
Technical Data
Airside™ Guidance Signs (AGS) Measured Load (VA) & Power Factor (PF)
Lamp Modules
1
2
3
Isolation
Transformer
CCR
VA*
PF (min)
100W
5-Step
100
0.95
100W
3-Step
100
0.95
200W
5-Step
160
0.95
200W
3-Step
160
0.95
300W
5-Step
230
0.95
300W
3-Step
230
0.95
* Applies to all sizes, single and double face. Measured wattage exceeds the total of the lamp wattages due to
the power consumption of the sign’s internal electrical system, and isolation transformer.
6.14
www.crouse-hinds.com/airportlighting
Dimensional Information
Floor Flange 25684-1
Dimensions:
Inches
(mm)
Instruction Manual:
9211 & S537
4.75 (121) BOLT CIRCLE
Size
2
FOUR HOLES
0.625 (15.8) DIAMETER
Sign Power Leg Orientation
When facing side A, the power entry
is on the right. Orders should always
specify the message orientation.
2-11.5 NPS THREADED HUB
6.0 (152) DIAMETER
Side View
Front View (Side B)
9.77
(248)
72.80 (1849), 2 MODULE
CROUSE-HINDS
AIRPORT LIGHTING PRODUCTS
WINDSOR, CT., U.S.A.
ELECTRIC SIGN
WARNING
25.50
(648)
27.50
(698)
FLOOR FLANGES
INCLUDED (4X)
18.20
(462)
18.20
(462)
18.20
(462)
Accessories
Description
Part
Number
Consolidating Harness
Gasket for Coverplate
Isolation Transformer 45 watts, 6.6/6.6A
Isolation Transformer 100 watts, 6.6/6.6A
Isolation Transformer 200 watts, 6.6/6.6A
Primary L-823 Connector Kit
Secondary Cable Assembly, 2 meters
26811-27
10530287
33001
33004
33006
54 Super-D4-D4
95M-PR7-K-2
Shipping Weight
lb.
kg.
5.2
12.0
16.0
2.4
5.4
7.3
Shipping Volume
cu. ft.
cu. m.
0.3
0.4
0.4
0.009
0.011
0.011
Renewal Parts
Item Description
Catalog Number
Item Description
Catalog Number
Blank Panel
Floor Flange
Frangible Coupling
Internal Transformer 3 Step
Internal Transformer 5 Step
Lamp 62 watts, 6.6A
60668*
25684-1
60683-2C
60511
60564
20590
Lamp Cover Cap
Lamp Cover Cap Gasket
Lamp Socket
Lead Assembly
Light Tube Assembly
Sign Face, Retroreflective
60638
60639
61107
CAS1M-P-B-1.0
60685-2
60667*
* Dash number required for size and number of modules (contact factory). Add description of color and legend.
Home Office: United States – +1 860-683-4300
International Offices: Canada • China • Dubai • Mexico • Brazil
6.15