Technical Data TD032098EN
Effective April 2015
915U-DNP3 outstation
DNP3 protocol feature key for 115E-2 industrial applications
Applications
Certificate
Thank you for purchasing the
ELPRO 915U-2 Feature Code.
•
•
Water and wastewater systems
SCADA
Specifications
Date: 26/02/2015
Module Serial Number:
Modbus Feature Code:
Logging Feature Code:
915U-2 Feature Code Certificate
The 915U-2 provides functionality that can be enabled by providing a code that is specific to
the unit and to the feature being enabled (The Feature Code). This certificate provides a record
of the feature codes that have been purchased for the 915U-2 with the serial number listed
above.
If these codes were purchased at the time of ordering the module, these features may have
already been enabled in the module. In this case the Feature Code will be documented on the
module test report. If the codes were purchased subsequent to purchasing the module, refer to
the user manual for instructions on how to enable the additional features.
Retain this certificate, as it may be necessary to re-enter the feature codes for this device at
some stage in the future.
SPECIFICATION
Connectivity
DNP3 TCP
DNP3 UDP
Data Types
Analog inputs
Analog outputs
www.eaton.com/wireless
Description
The ELPRO 915U-DNP3 feature key provides DNP3
outstation protocol support for the 115E-2 product
family.
DNP3 protocol support can be combined with Modbus®
RTU/TCP to provide a powerful gateway to interface
DNP3 to many other Modbus‑based devices. I/O
expansion through the use of ELPRO 115S expansion
modules are also fully and seamlessly supported by the
915U-DNP3.
Features
•
•
•
•
•
DNP3 TCP/UDP (Ethernet)
Level 2 outstation support
Modbus gateway
Remote configuration
Automatic time synchronization
Binary input
Binary output
Counter
Protocol
Level
Unsolicited event
reporting
Static data
Event data
Alarms
Time synchronization
Remote configuration
Configuration
Configuration utility
Web page
configuration
Remote configuration
DESCRIPTION
Supported on Ethernet port
Supported on Ethernet port
Time stamped events with dead-band and scaling to
engineering units
Select-operate functionality with scaling from engineering
units
Time stamped events
Select-operate functionality with single bit outputs
Time stamped events with dead-band and counter freeze
operation
Level 2 outstation slave device
Can be enabled or disabled by event class
Immediate I/O status
Time stamped I/O events
Send alarm state with time stamped support
Synchronize internal real time clock with DNP3 master or NTP
server
DNP3 master can make configuration changes to polling class
and dead bands
PC based configuration program for all DNP3 parameters via
USB or Ethernet ports
Via internal Web page
Using PC configuration utility or via
internal Web page
Technical Data TD032098EN
915U-DNP3 outstation


Effective April 2015
Ordering
PRODUCT CODE
915U-DNP3
DESCRIPTION
DNP3 protocol support feature key
Accessories
PRODUCT CODE DESCRIPTION
I/O Devices
115E-2
DATA SHEET
Ethernet networking I/O and gateway
TD032097EN
Eaton’s wireless business
www.eaton.com/wireless
North America & Latin America
5735 W. Las Positas Suite 100
Pleasanton, CA 94588
United States
Telephone: +1 925 924 8500
Australia, New Zealand
9/12 Billabong Street
Stafford Queensland 4053
Australia
Telephone: +61 7 3352 8600
Southeast Asia
2 Serangoon North Avenue 5
# 06-01 Fu Yu Building, 554911
Singapore
Telephone: +65 6645 9888
Europe
Hein-Moeller-Straße 7-11
53115 Bonn, Germany
Telephone: +49 (0) 180 5223822
China
955 Shengli Road
East Area of Zhangjiang High-Tech Park
Shanghai, 201201
China
Telephone: +86 21 2899 3600
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. TD032098EN
April 2015
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.