Catalog # Type

advertisement
CORELITE
DESCRIPTION
Expanding upon the signature direct-indirect open baffle profile of the
original Stellar series, Corelite presents the new Stellar Q series. With its
clean geometric lines, highly efficient optical design, and enhanced
uplight/downlight control, the Stellar Q series offers the ideal solution for
high or exposed ceiling applications. Both housing profiles, tailored
specifically to their respective lamping capabilities, can be suspended or
surface mounted.
Type
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
A ... Construction
Die-formed all aluminum baffle
assembly (2" blade spacing)
mechanically attached to a
corrosion resistant formed steel
ballast channel. Perforated siderail
sections are 23% open with 0.0625"
stagger hole spacing. Standard
4'-0", 8'-0", and 12'-0" fixture
lengths combine for
continuous runs.
B ... End Plates
Laser cut 14-gauge cold rolled
steel, mechanically attached
without exposed fasteners.
C ... Electrical
T8 fixtures are pre-wired with quick
wire connectors and use UL listed
Class P, 265ma T8 instant start
universal voltage electronic
ballasts, power factor of 95% with
less than 10% THD. Fixtures and
electrical components certified to
UL and CUL standards.
D ... Finish
Fixture housings are standard
white using electrostatically
applied polyester powder coat
paint. Consult factory for custom
finishes.
A
C
Mounting
Crossbar cover supports the fixture
at the power mount and connects
to 4" octagonal junction box, by
others. All other mounts interface
to 1/4"-20 studs by others,
protruding from the ceiling. The
first suspension point is the length
of the fixture less 2-3/8", all other
suspension points are 4', 8' or 12'
on-center. See installation
instructions.
Stellar Q
9"
2T8
SIDE VIEW
D
B
Surface
Full Direct
Light Distribution
Indirect - 0.0%
Direct - 100%
2-7/8"
[74mm]
2-7/8"
[73mm]
3/32" [2 mm]
9" [229mm]
M O D U L E S A N D D I M E N S I O N S*
48" [1219mm]
96" [2438mm]
144" [3658mm]
*Dimensions do not include end plates.
ORDERING INFORMATION
Sample Number: Q2-WB-2T8-1C-UNV-SU-JB-8-DL100
Series
Q2=Stellar Q 9"
Surface (2T8)
Optics Up
W=White
Optics Down
B=Baffle
Number of
Lamps
2=2 Lamps
Notes: 1
Lamp Type
T8=T8 Normal
Output
Wiring 1
B=Battery Pack
Voltage 1
120=120V
Number of
Circuits
1=1 Circuit
C=Standard Circuit
D=Dimming
277=277V
347=347V
E=Emergency
T=Nightlight
UNV=Universal
(120V-277V)
1
2=2 Circuits
Suspension
SU-JB=Surface
Mount
Y=Daylight
Run Length
Individually
Mounted
Luminaires may be
4', 8', or 12' in
length
Options
DL100=100% Downlight
Kit
DL70=70% Downlight Kit
Continuously
Mounted
Standard row
configurations over
12' consist of 8'
and 12' sections
Not all options available. Please consult your Cooper Lighting
Representative for availability.
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADE090058
12/02/2011 3:13:06 PM
Download