Product Brief
Clampstick Leverage Bar
System Problem:
The new Clampstick Leverage Bar from Cooper Power Systems provides operators with an increased level
of ease and comfort when performing loadbreak switching operations.
•
•
•
Construction:
Features
& Benefits:
Made of the same yellow fiberglass pole used in our time-proven Kearney™ Clampsticks, the end fitting
conveniently attaches to a universal Fit-On™ head which can be retrofitted if not currently part of your
hotstick. The Clampstick Leverage Bar provides 18” of leverage and has a yellow vinyl handle grip which is
comfortable to hold.
•
•
•
•
Product
Specification:
Note:
Elbows are easier to loosen before removal
Hot line clamps are easier to tighten or loosen
Operators are at a safe distance from the switch
Operators will appreciate the Clampstick Leverage Bar’s new 18” leverage design
Adding the Clampstick Leverage Bar to the end of the hotstick puts the operator at a maximum
distance from the equipment being operated
Fiberglass pole material is tested to 100 kV (rms) per foot for superior strength
Fit-On head (existing or universal) allows for easy attachment of the Clampstick Leverage Bar
○○ If your hotstick is equipped with a Fit-On head, the Clampstick Leverage Bar will easily attach
○○ You can retrofit any clampstick by adding the universal Fit-On head and then attaching our
Clampstick Leverage Bar
Product Type:
Insulated Hi-Line Tools
Tool Type:
Clampstick Fit-On Tool & Accessories
Dimensions:
18" (457 mm) x 1.25" (32 mm) Dia . (1.5" (38 mm) Dia. over fitting)
Electrical Characteristics:
100 kV per foot (fiberglass material)
Standard Package:
1
Min. Order Quantity:
1
Weight:
0.7 lbs
Catalog Number:
CS125UFLTOOL
The level of torque required to turn some switches may exceed capacity of the hotstick. Therefore, Cooper
Power Systems does not recommend the use of the clampstick leverage bar with the Internal Rod Clampstick.
Cooper Power Systems, Fit-On, Kearney, and Cam-El are trademarks of Cooper Industries, in the U.S. and other countries.
You are not permitted to use Cooper trademarks without the prior written consent of Cooper Industries.
©2013 Cooper Industries. All Rights Reser ved
Clampstick Leverage Bar
Decrease effort and increase productivity with leverage
from Cooper Power Systems.
Insulated Head Clampsticks
External Rod
with Fit-On* head
Length
CS125E048SUF
CS125E060SUF
CS125E080SUF
CS125E100SUF
CS125E120SUF
4' 8"
6’
8’
10’
12' 8"
*The Fit-On head adds 2 inches
Cam-EL™ Clampstick
External Rod
with Fit-On* head
Length
CS125E048CUF
CS125E006CUF
CS125E080CUF
CS125E120CUF
4’ 8”
6’
8’
10’
*The Fit-On head adds 2 inches
The Cam-El Clampstick features a
special cam-action lever to improve hold
and control. After the hook has been
pulled tight, the Cam-El lever provides an
extra ratchet for a secure hold.
Retrofit kit for Kearney Clampsticks:
Description
Category #
Universal Fit-On
4455
head for 1 1/4” poles.
Includes spring pin.
Decrease effort with the Clampstick Leverage Bar from Cooper Power Systems. Contact your local representative or call
877-CPS-INFO.
Cooper Power Systems
2300 Badger Drive
Waukesha, WI 53188
P: 877-CPS-INFO
www.cooperpower.com
B325-09020
May, 2013