MCT-430SL Power Line Carrier Metering and Control Transponder Save time and money with remote meter reading The MCT-430SL is your gateway to the Smart Grid with low-cost remote meter reading of medium to large commercial and industrial (C&I) power customers and advanced data collection·capabilities. The newest member of Eaton's Cooper Power Systems Metering and Control Transponder (MCT) family, the MCT-430SL is based on the Itron Sentinel® meter and allows bidirectional communications of data via our Power Line Carrier (PLC) communications saving valuable time and money. Reliable Communications: The PLC communications system uses utility power lines to provide reliable communications from the distribution substation through the distribution transformer to the end metering or control points, eliminating the need for crews to visit each site for valuable information. System control is through Eaton's Cooper Power Systems Yukon™ Advanced Energy Services Master Station, which supports our PLC system. Every MCT-430SL transponder includes the standard functions of: • Remote kWh meter reading • Load profile • Time-of-use • Freeze register capability The master station can be tied to a utility billing or customer information system to automatically download customer billing information. Eaton's Cooper Power Systems guarantees 100% compatibility with your billing system. Polyphase Capabilities: • Underglass polyphase metering endpoint • Robust data set including provisions for load profile, power quantities and Time-ofUse (TOU) • Low cost data collection • Provides a data gateway for polyphase meters • Allows advanced billing for polyphase customers Remote metering for medium to large power customers just got easier. MCT-430SL Features: • Retrieves kW demand and peak kW and stores it in the meter • Remotely reset peaks • Uses utility-owned power line carrier communications • Group addressing • Electronic LCD register • Retrieves per-phase voltage and current • • Configurable time zone with daylight saving time and holiday dates Communication Retrieves data from ANSI C12.19 tables • • Load Profile • Data is recorded at 5-, 15-, 30- or 60-minute intervals • Time-of-Use Up to four rates and four TOU schedules can be remotely retrieved • Allows on-demand reads within three (3) to six (6) seconds (round trip) The PLC supports one-way and two-way distribution automation (DA) and demand response (DR) simultaneous with metering activity Interval is controlled by the configuration in the meter Specifications Communication Options Type Carrier frequency Modulation Data Rate Error Detection Operating Requirements Voltage Frequency Temperature Relative Humidity Addressing Options • Unique Addressing – all meters are shipped with a factory-installed unique address • Group Addressing – supports more than 8,000 group addresses for use with the following commands • Time Sync • Reset Power Fail Counter • Demand Reset Demand Reset The Demand Reset command can be used with unique meter addressing or can be broadcast using group addressing. Collection Capabilities Two-way Eaton's Cooper Power Systems PLC 12.5 kHz CPSK Coherent Phase Shift Keying 72 to 76 bps Six bit BCH Code on all carrier messages 120 to 277 VAC 50/60 Hz -40º to +185º F (-40º to +85º C) 0 to 95% non-condensing Previous Interval Demand Peak Demand(s) Date and Time of Peak kWh kVARh/kVAR (optional) Voltage per phase Amps Per Phase Time-of-Use (TOU) kVAh/kVA (optional) Remote Demand Reset Outage Counter Frozen Data/Self Read Interface 6 months of data RS-232 For Eaton's Cooper Power Systems MCT-430SL product information, call 1-877-277-4636 or visit: www.CooperPower.com Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Eaton’s Cooper Power Systems Business 2300 Badger Drive Waukesha, WI 53188 United States CooperPower.com © 2014 Eaton All Rights Reserved Printed in USA Publication No. B1110-08112 March 2014 Eaton, Cooper Power Systems and Yukon are valuable trademarks of Eaton in the U.S. and other countries. You are not permitted to use the Eaton Trademarks without the prior written consent of Eaton. Sentinel is a registered trademark of Itron. All other trademarks are property of their respective owners.