8 7 6 5 E REV 2 1 136 5.4 134 5.3 35 TYP 1.4 DESCRIPTION DATE INITIAL RELEASE 1/8/14 ZONE A 67 TYP 2.6 8 TYP .3 3 REVISIONS 69 TYP 2.7 F 4 ECN BY TCB F 203 8.0 200 7.9 32 TYP 1.2 E 172 TYP 6.8 81 TYP 32 TYP 3.2 1.3 9 TYP .3 186 7.3 19 TYP .8 CVR-J-60200-M (COVER NON-INDICATING) CVRI-J-60200-M (COVER WITH INDICATION) D D ALLEN KEY 3/8" TYP. C 97 TYP 3.8 C 75 TYP 3.0 45 TYP 1.8 67 TYP 2.6 46 TYP 1.8 JM60200-1CR JM60200-1CR (SHOWN WITH COVER) JM60200-3CR LOCKOUT-TAGOUT FEATURE (SEE NOTE 6) JM60200-2CR B B NOTES: SLA3_BUSS_NAE_GENRL_REV_A A MODEL VERSION MODEL SOURCE DATA JM60200-XCR THIS DRAWING IS AN UNCONTROLLED COPY IF PRINTED OR SENT ELECTRONICALLY, DO NOT SCALE DRAWING APPROVALS GENERAL DRAWING PRACTICES IN ACCORDANCE WITH ASME - Y14.100-2004 DIMENSIONS AND TOLERANCES IN ACCORDANCE WITH ASME - Y14.5M-1994 PRODUCT MANAGER -- ENGINEER EATON CORPORATION - CONFIDENTIAL AND PROPRIETARY UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN NOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION MILLIMETERS TOLERANCES TO BE THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTIANED THEREON, IS CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON CORPORATION AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME. BY TAKING POSSESSION OF THE DOCUMENT, THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE CASE OF CONFLICTING CONTRACTUAL PROVISIONS, THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT. C 2012 Eaton Corporation, All Rights Reserved. 7 3D VIEW FOR JM60200-1CR WITH COVER SCALE = NONE 3D VIEW FOR JM60200-1CR SCALE = NONE 1) VOLTAGE RATING: 600V 2) AMP RATING: 200A 3) WITHSTAND RATING: 200kA 4) WIRE TYPE: Cu/Al 75°C / 90°C ONLY 5) WIRE RANGE: (1) 250MCM - 6 AWG Cu/Al (1) 2 - 6 AWG Cu/Al (2) 2 - 6 AWG Cu 6) USE 4mm DIA. CABLE LOCK OR 1/4" DIA. HASP PADLOCK. 8 6 REMOVE FOR WIRES ABOVE 2 AWG 5 4 ONE PLACE X.X TWO PLACE X.X X ALL ANGLES X.X = ±0.3 mm = ±0.13 mm = ± 1° SPECIAL CHARACTERISTIC SIGNIFICANT CHARACTERISTIC THIRD ANGLE PROJECTION 3 -- QUALITY -- CUSTOMER PRINT . DATE --/--/-----/--/-----/--/---- MATERIAL (0) (0) . TITLE A 600V / 200A CLASS J FUSE BLOCK SIZE DWG NO. SCALE: 1:2 A3 FINISH N/A 2 JM60200-SERIES-CP 1 REV SHEET A 1 OF 3 Tue Oct 01, 2013 4:0X PM GPK 8 7 6 5 4 3 2 1 69 TYP 2.7 F 67 TYP 2.6 35 TYP 1.4 8 TYP .3 F 136 5.4 134 5.3 203 8.0 200 7.9 32 TYP 1.2 ALLEN KEY 3/8" TYP 172 TYP E 6.8 E 19 TYP .8 81 TYP 3.2 32 TYP 1.3 186 7.3 CVR-J-60200-M (COVER NON-INDICATING) CVRI-J-60200-M (COVER WITH INDICATION) 9 TYP .3 D D ALLEN KEY 1/8" TYP 9 TYP .4 C REMOVE FOR USE WITH MULTIPLE WIRES 97 TYP 3.8 C 75 TYP 3.0 43 TYP 1.7 42 TYP 1.6 B SLA3_BUSS_NAE_GENRL_REV_A A 8 TYP .3 8 TYP .3 67 TYP 2.6 7 B JM60200-2MW16 JM60200-1MW16 NOTES: 6) VOLTAGE RATING: 600V 7) AMP RATING: 200A 8) WITHSTAND RATING: 200kA 9) WIRE TYPE: Cu / Al 75°C ONLY 10) WIRE RANGE: LINESIDE (1) 250KCMIL - 6 AWG Cu/Al LOADSIDE (6) 4 AWG - 14 AWG Cu (6) 4 AWG - 8 AWG Al (12) 10 AWG - 14 AWG Cu 11) USE 4mm DIA. CABLE LOCK OR 1/4" DIA. HASP PADLOCK. 13) SEE PAGE 1 FOR LINESIDE DIMENSIONS. 8 JM60200-1MW16 WITH COVER JM60200-3MW16 LOCKOUT-TAGOUT FEATURE (SEE NOTE11) . CUSTOMER PRINT . TITLE 3D VIEW OF JM60200-1MW16 SCALE = NONE 6 5 4 3D VIEW OF JM60200-1MW16 WITH COVER SCALE = NONE 3 A 600V / 200A CLASS J FUSE BLOCK SIZE DWG NO. SCALE: 1:2 A3 2 JM60200-SERIES-CP 1 REV SHEET A 2 OF 3 Tue Oct 01, 2013 4:0X PM GPK 8 7 6 5 4 3 2 1 F F LIFT UP. THEN ROTATE COVER. E E PUSH DOWN D D C C LIFT UP. B B . . SLA3_BUSS_NAE_GENRL_REV_A A TITLE 7 6 5 4 3 2 600V / 200A CLASS J FUSE HOLDER SIZE DWG NO. SCALE: 1:2 A3 8 A JM60200-SERIES-CP 1 REV SHEET A 3 OF 3 Tue Oct 01, 2013 4:0X PM GPK