8 F E 7 22 TYP .9 6 5 4 3 2 1 REVISIONS 53 2.1 51 2.0 104 4.1 102 4.0 1 TYP .04 REV DATE 1/8/14 ECN BY TCB 155 6.1 153 6.0 29 TYP 1.1 F 8 TYP .3 71 2.8 29 TYP 1.1 138 TYP 5.4 DESCRIPTION INITIAL REALEASE ZONE A CVR-J-60100-M (NON INDICATING) CVRI-J-60100-M (WITH INDICATION) 152 6.0 E 13 TYP .5 ALLEN KEY 9/32" TYP D D 55 TYP 2.2 35 TYP 1.4 51 TYP 2.0 37 TYP 1.5 C REMOVE FOR WIRE ABOVE 6 AWG 77 3.0 JM60100-1CR JM60100-1CR (SHOWN WITH COVER) JM60100-3CR C JM60100-2CR LOCKOUT-TAGOUT FEATURE (SEE NOTE 6) B B NOTES: SLA3_BUSS_NAE_GENRL_REV_A A 1) VOLTAGE RATING: 600V 2) AMPERAGE: 100A 3) WITHSTAND RATING: 200kA 4) WIRE: Cu/Al 75°C/90°C ONLY 5) WIRE RANGE: (1) 1/0 - 14 AWG Cu (1) 1/0 - 12 AWG Al 6) USE 4mm DIA. CABLE LOCK OR 1/4" DIA. HASP PADLOCK. MODEL VERSION MODEL SOURCE DATA JM60100-XCR THIS DRAWING IS AN UNCONTROLLED COPY IF PRINTED OR SENT ELECTRONICALLY, DO NOT SCALE DRAWING 7 6 APPROVALS GENERAL DRAWING PRACTICES IN ACCORDANCE WITH ASME - Y14.100-2004 DIMENSIONS AND TOLERANCES IN ACCORDANCE WITH ASME - Y14.5M-1994 PRODUCT MANAGER -- ENGINEER EATON CORPORATION - CONFIDENTIAL AND PROPRIETARY UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN NOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION MILLIMETERS TOLERANCES TO BE THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTIANED THEREON, IS CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON CORPORATION AND IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME. BY TAKING POSSESSION OF THE DOCUMENT, THE RECIPIENT ACKNOWLEDGES AND AGREES THAT THIS DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE CASE OF CONFLICTING CONTRACTUAL PROVISIONS, THIS NOTICE SHALL GOVERN THE STATUS OF THIS DOCUMENT. C 2012 Eaton Corporation, All Rights Reserved. 8 3D VIEW FOR JM60100-1CR WITH COVER SCALE = NONE 3D VIEW FOR JM60100-1CR SCALE = NONE 5 4 ONE PLACE X.X TWO PLACE X.X X ALL ANGLES X.X = ±0.3 mm = ±0.13 mm = ± 1° SPECIAL CHARACTERISTIC SIGNIFICANT CHARACTERISTIC THIRD ANGLE PROJECTION 3 -- QUALITY -- CUSTOMER PRINT . DATE --/--/-----/--/-----/--/---- MATERIAL (0) (0) . A TITLE 600V / 100A CLASS J FUSE BLOCK SIZE DWG NO. SCALE: 1:2 A3 FINISH N/A 2 JM60100-SERIES-CP 1 REV SHEET A 1 OF 3 Tue Oct 01, 2013 4:0X PM GPK 8 7 6 53 TYP 2.1 F 21 TYP .8 104 4.1 51 TYP 2.0 1 TYP .04 29 TYP 1.1 5 4 3 2 1 F 155 6.1 153 6.0 102 4.0 ALLEN KEY 9/32" TYP E 138 TYP 5.4 71 TYP 29 TYP 1.1 2.8 E 8 TYP .3 CVR-J-60100-M (NON INDICATING) CVRI-J-60100-M (WITH INDICATION) 152 6.0 13 TYP .5 ALLEN KEY 1/8" TYP D D 8 TYP .3 C 77 TYP 3.0 55 TYP 31 TYP 2.2 1.2 REMOVE FOR USE WITH MULTIPLE WIRES C 7 TYP .3 36 TYP 1.4 JM60100-1MW14 51 TYP 2.0 JM60100-1MW14 (SHOWN WITH COVER) JM60100-3MW14 JM60100-2MW14 B B SLA3_BUSS_NAE_GENRL_REV_A A NOTES: 7) VOLTAGE RATING: 600V 8) AMPERAGE: 100A 9) WITHSTAND RATING: 200kA 10) WIRE Cu/Al 75°C/90°C 11) WIRE RANGE: LINESIDE (1) 1/0 - 14 AWG Cu/Al LOADSIDE (4) 4 AWG - 14 AWG Cu (4) 4AWG - 8 AWG Al (8) 10 AWG - 14 AWG Cu 12) USE 4mm DIA. CABLE LOCK OR 1/4" DIA. HASP PADLOCK. 13) SEE PAGE 1 FOR LINESIDE DIMENSIONS. 8 7 6 LOCKOUT-TAGOUT FEATURE (SEE NOTE 12) . CUSTOMER PRINT . A TITLE 3D VIEW FOR JM60100-1MW14 SCALE = NONE 5 4 600V / 100A CLASS J FUSE BLOCK 3D VIEW FOR JM60100-1MW14 (SHOWN WITH COVER) SCALE = NONE 3 SIZE DWG NO. SCALE: 1:2 A3 2 JM60100-SERIES-CP 1 REV SHEET A 2 OF 3 Tue Oct 01, 2013 4:0X PM GPK 8 7 6 5 4 3 2 1 F F LIFT UP. THEN ROTATE COVER. E E PUSH DOWN D D C C LIFT UP. B B . . SLA3_BUSS_NAE_GENRL_REV_A A TITLE 7 6 5 4 3 2 600V / 100A CLASS J FUSE BLOCK SIZE DWG NO. SCALE: 1:2 A3 8 A JM60100-SERIES-CP 1 REV SHEET -- 3 OF 3 Tue Oct 01, 2013 4:0X PM GPK