8
7
CATALOG NO. / FUSE TYPE
F
RM60060-1CR
CLASS R 200kA WITHSTAND
RM60060-2CR
CLASS R 200kA WITHSTAND
RM60060-3CR
CLASS R 200kA WITHSTAND
6
TERMINAL TYPE
HM60060-1CR
CLASS H 10kA WITHSTAND
HM60060-2CR
CLASS H 10kA WITHSTAND
HM60060-3CR
CLASS H 10kA WITHSTAND
5
IP20 FINGER SAFE COVERS
W/O INDICATION
INDICATION
4
REV
CVR-RH-60060
77
3.0
7
.3
8
.3
C
1-POLE
RM60060-1CR
CVR-RH-60060 (NON-INDICATING)
CVRI-RH-60060 (INDICATING)
PROVISION FOR MARKER LABEL
SEE NOTE 8
E
202
8.0
D
PROVISION FOR
MARKER LABEL SEE NOTE 8
LOCKOUT TAGOUT RING
SEE NOTE 6
66
2.6
54
2.1
3-POLE
RM60060-3CR
172
6.8
3
.1
115
4.5
17
.7
38
1.5
2-POLE
RM60060-2CR
BY
AVM
F
5
.2
38
1.5
ECN
BU-SB14TBD
CLASS H BLOCKS HAVE NO REJECTION FEATURE
82
3.2
116
4.6
DATE
5/8/14
CLASS H FUSE BLOCKS
E
77
3.0
DESCRIPTION
PRE-RELEASE
3
BOX LUG
CLASS R BLOCKS HAVE A REJECTION FEATURE
39
1.6
1
2
CVRI-RH-60060
CLASS R FUSE BLOCKS
D
ZONE
A
1
BOX LUG
2
REVISIONS
NO. OF
POLES
BOX LUG
3
1-POLE
HM60060-1CR
C
RM60060-1CR
SHOWN WITH COVER
3-POLE
HM60060-3CR
2-POLE
HM60060-2CR
NOTES:
B
SLA3_BUSS_NAE_GENRL_REV_A
A
1) VOLTAGE RATING: 600V
2) AMPERAGE: 60A
3) WITHSTAND RATING:
CLASS R = 200kA
CLASS H = 10kA
4) WIRE: CU/AL 75C
5) WIRE RANGE:
(1) 2 - 14 AWG CU
2-3: 50 lb-in (5.6 Nm)
4-6, 45 lb-in (5.1 Nm)
8, 40 lb-in (4.5 Nm)
10-14, 35 lb-in (4.0 Nm)
(1) 2 - 8 AWG AL
2-3: 50 lb-in (5.6 Nm)
4-6, 45 lb-in (5.1 Nm)
8, 40 lb-in (4.5 Nm)
6) LOCKOUT: USE 4mm DIA. CABLE LOCK OR 1/4" DIA. HASP PADLOCK.
7) RECOMMEND USING DIN-RAIL END STOPS FOR DIN RAIL MOUNTED APPLICATIONS
BUSSMANN PART NUMBERS BRKT-ND OR BRKT-NDSCREW2
8) USE BUSSMANN MARKER LABEL TM26CB
9) ALL DIMENSIONS TYPICAL UNLESS OTHERWISE INDICATED
8
7
6
B
3D VIEW FOR RM60060-1CR
SCALE NONE
3D VIEW FOR RM60060-1CR
WITH COVER
SCALE NONE
3D VIEW FOR HM60060-1CR
SCALE NONE
.
CUSTOMER PRINT
MODEL VERSION
MODEL SOURCE DATA
RM60060-1CR
THIS DRAWING IS AN UNCONTROLLED COPY IF
PRINTED OR SENT ELECTRONICALLY,
DO NOT SCALE DRAWING
APPROVALS
GENERAL DRAWING PRACTICES IN
ACCORDANCE WITH ASME - Y14.100-2004
DIMENSIONS AND TOLERANCES IN
ACCORDANCE WITH ASME - Y14.5M-1994
PRODUCT MANAGER
D. McDowell
ENGINEER
EATON CORPORATION - CONFIDENTIAL AND PROPRIETARY UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN
NOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION MILLIMETERS TOLERANCES TO BE
THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTIANED THEREON,
IS CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON CORPORATION AND
IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME. BY TAKING
POSSESSION OF THE DOCUMENT, THE RECIPIENT ACKNOWLEDGES AND AGREES THAT
THIS DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF
EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE
REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE CASE OF
CONFLICTING CONTRACTUAL PROVISIONS, THIS NOTICE SHALL GOVERN THE
STATUS OF THIS DOCUMENT.
C 2012 Eaton Corporation, All Rights Reserved.
5
4
ONE PLACE X.X
TWO PLACE X.X X
ALL ANGLES X.X
= ±0.3 mm
= ±0.13 mm
= ± 1°
SPECIAL CHARACTERISTIC
SIGNIFICANT CHARACTERISTIC
THIRD ANGLE PROJECTION
3
A.VZM
QUALITY
--
DATE
5/8/2014
5/8/2014
--/--/----
MATERIAL
(0)
(0)
N/A
600V / 60A CLASS R & H FUSE BLOCK
SIZE
DWG NO.
SCALE:
1:3
A3
FINISH
N/A
2
A
TITLE
RM60060-HM60060-CP
SHEET
1
REV
A
1 OF 2
Tue Oct 01, 2013 4:0X PM GPK
8
7
6
5
4
3
2
1
F
F
CUT COVER TAB
AT NOTCH FOR
USE WITH WIRES
LARGER THAN
8 AWG
E
E
1. HOOK DIN RAIL SNAPS ON ONE SIDE OF THE DIN RAIL
D
D
2. PUSH DOWN TO DEFLECT THE SNAPS
DETAIL A
SCALE 1 : 1
C
C
A
3. ROTATE UNTIL THE
OPPOSITE SIDE SNAPS
ONTO DIN RAIL
B
CLOSING
PUSH STRAIGHT DOWN UNTIL SNAPS CLICK
INTO PLACE
OPENING
PULL STRAIGHT UP AT BOTH OUTSIDE
HANDLES
B
INSTALLATION ON DIN RAIL
END STOPS MAY BE NECESSARY FOR SOME
ASSEMBLY CONDITIONS - SEE NOTE 7
.
CUSTOMER PRINT
SLA3_BUSS_NAE_GENRL_REV_A
A
A
TITLE
600V / 60A CLASS R & H FUSE BLOCK
SIZE
DWG NO.
SCALE:
1:2
A3
8
7
6
5
4
3
2
RM60060-HM60060-CP
SHEET
1
REV
A
2 OF 2
Tue Oct 01, 2013 4:0X PM GPK