8
7
6
CATALOG NO. / FUSE TYPE
F
RM25060-1CR
CLASS R 200kA WITHSTAND
RM25060-2CR
CLASS R 200kA WITHSTAND
RM25060-3CR
CLASS R 200kA WITHSTAND
TERMINAL TYPE
HM25060-1CR
CLASS H 10kA WITHSTAND
HM25060-2CR
CLASS H 10kA WITHSTAND
HM25060-3CR
CLASS H 10kA WITHSTAND
5
IP20 FINGER SAFE COVERS
W/O INDICATION
INDICATION
CVR-RH-25060
CVRI-RH-25060
NO. OF
POLES
REV
ZONE
A
4
.2
3
.1
D
35
1.4
DATE
ECN
BY
5/8/14
BU-SB14TBD
AVM
CLASS H FUSE BLOCKS
PROVISION FOR
MARKER LABEL
SEE NOTE 8
H CLASS BLOCKS HAVE NO REJECTION FEATURE
E
32
1.2
6
.2
34
1.3
DESCRIPTION
PRE-RELEASE
F
R CLASS BLOCKS HAVE A REJECTION FEATURE
108
4.2
1
3
BOX LUG
7
.3
2
2
CLASS R FUSE BLOCKS
E
3
REVISIONS
1
BOX LUG
BOX LUG
4
69
2.7
68
2.7
135
5.3
102
4.0
103
4.1
PROVISION FOR
MARKER LABEL
SEE NOTE 8
47
1.8
D
LOCKOUT TAGOUT RING
SEE NOTE 6
58
2.3
34
1.3
C
1-POLE
RM25060-1CR
2-POLE
RM25060-2CR
19
.7
CVR-RH-25060 (NON INDICATING)
CVRI-RH-25060 (WITH INDICATION)
3-POLE
RM25060-3CR
2-POLE
HM25060-2CR
1-POLE
HM25060-1CR
3-POLE
HM25060-3CR
C
RM25060-1CR
SHOWN WITH COVER
NOTES:
B
SLA3_BUSS_NAE_GENRL_REV_A
A
1) VOLTAGE RATING: 250V
2) AMPERAGE: 60A
3) WITHSTAND RATING:
CLASS R = 200kA
CLASS H = 10kA
4) WIRE: CU/AL 75C
5) WIRE RANGE:
(1) 2 - 14 AWG CU
2-3: 50 lb-in (5.6 Nm)
4-6, 45 lb-in (5.1 Nm)
8, 40 lb-in (4.5 Nm)
10-14, 35 lb-in (4.0 Nm)
(1) 2 - 8 AWG AL
2-3: 50 lb-in (5.6 Nm)
4-6, 45 lb-in (5.1 Nm)
8, 40 lb-in (4.5 Nm)
6) LOCKOUT: USE 4mm DIA. CABLE LOCK OR 1/4" DIA. HASP PADLOCK.
7) RECOMMEND USING DIN-RAIL END STOPS FOR DIN RAIL MOUNTED APPLICATIONS
BUSSMANN PART NUMBERS BRKT-ND OR BRKT-NDSCREW2
8) USE BUSSMANN MARKER LABEL TM26CB
9) ALL DIMENSIONS TYPICAL UNLESS OTHEWISE INDICATED
8
7
6
B
3D VIEW FOR RM25060-1CR
SCALE NONE
3D VIEW FOR RM25060-1CR
WITH COVER
SCALE NONE
3D VIEW FOR HM25060-1CR
SCALE NONE
.
CUSTOMER PRINT
MODEL VERSION
MODEL SOURCE DATA
RM25060-xCR
THIS DRAWING IS AN UNCONTROLLED COPY IF
PRINTED OR SENT ELECTRONICALLY,
DO NOT SCALE DRAWING
APPROVALS
GENERAL DRAWING PRACTICES IN
ACCORDANCE WITH ASME - Y14.100-2004
DIMENSIONS AND TOLERANCES IN
ACCORDANCE WITH ASME - Y14.5M-1994
PRODUCT MANAGER
D. McDowell
ENGINEER
EATON CORPORATION - CONFIDENTIAL AND PROPRIETARY UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN
NOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR TECHNICAL INFORMATION MILLIMETERS TOLERANCES TO BE
THIS DOCUMENT, INCLUDING THE DRAWING AND INFORMATION CONTIANED THEREON,
IS CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON CORPORATION AND
IS MERELY ON LOAN AND SUBJECT TO RECALL BY EATON AT ANY TIME. BY TAKING
POSSESSION OF THE DOCUMENT, THE RECIPIENT ACKNOWLEDGES AND AGREES THAT
THIS DOCUMENT CANNOT BE USED IN ANY MANNER ADVERSE TO THE INTERESTS OF
EATON AND THAT NO PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE
REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT OF EATON. IN THE CASE OF
CONFLICTING CONTRACTUAL PROVISIONS, THIS NOTICE SHALL GOVERN THE
STATUS OF THIS DOCUMENT.
C 2012 Eaton Corporation, All Rights Reserved.
5
4
ONE PLACE X.X
TWO PLACE X.X X
ALL ANGLES X.X
= ±0.3 mm
= ±0.13 mm
= ± 1°
SPECIAL CHARACTERISTIC
SIGNIFICANT CHARACTERISTIC
THIRD ANGLE PROJECTION
3
A.VZM
QUALITY
--
DATE
5/8/2014
5/8/2014
--/--/----
MATERIAL
(0)
(0)
N/A
250V / 60A CLASS R & H FUSE BLOCK
SIZE
DWG NO.
SCALE:
1:2
A3
FINISH
N/A
2
A
TITLE
RM25060-HM25060-CP
SHEET
1
REV
A
1 OF 2
Tue Oct 01, 2013 4:0X PM GPK
8
7
6
5
4
3
2
1
F
F
CUT COVER TAB
AT NOTCH FOR
USE WITH WIRES
LARGER THAN
8 AWG
E
E
1. HOOK DIN RAIL SNAPS ON ONE SIDE OF THE DIN RAIL
D
D
2. PUSH DOWN TO DEFLECT THE SNAPS
DETAIL A
SCALE 2 : 1.5
C
C
A
3. ROTATE UNTIL THE
OPPOSITE SIDE SNAPS
ONTO DIN RAIL
B
B
CLOSING
PUSH STRAIGHT DOWN UNTIL SNAPS CLICK
INTO PLACE
INSTALLATION ON DIN RAIL
END STOPS MAY BE NECESSARY FOR SOME
ASSEMBLY CONDITIONS - SEE NOTE 7
OPENING
PULL STRAIGHT UP AT BOTH OUTSIDE
HANDLES
.
CUSTOMER PRINT
SLA3_BUSS_NAE_GENRL_REV_A
A
A
TITLE
250V / 60A CLASS R & H FUSE BLOCK
SIZE
DWG NO.
SCALE:
1:2
A3
8
7
6
5
4
3
2
RM25060-HM25060-CP
SHEET
1
REV
A
2 OF 2
Tue Oct 01, 2013 4:0X PM GPK